Paring

Brand: Hitohira ひとひら (一片)
Line: TH Stainless
Profile: Paring
Edge Length: 77mm
Blade Height: 20mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Mono
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Total Length: 190mm
Spine Length: 80mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm 
Handle Length: 105mm
Weight: 58g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  K Sabatier
Made in: Thiers - France
Line: Authentique - Olive
Profile: Paring
Edge Length: 79mm
Blade Height: 19mm
Edge Steel: Z50C13 
Steel Type: Stainless 
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel:  Double
Bevel Symmetry: 50/50
Hand Orientation:  Ambidextrous
Handle Shape: Western
Handle Material: Olive Wood
Ferrule/Bolster Material: Stainless
Total Length: 181mm
Spine Length: 78mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 98mm
Weight: 58g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique
Profile: Paring
Edge Length: 76mm  
Blade Height: 18mm
Edge Steel: Z50C13 
Steel Type: Stainless
Construction: Mono-Steel 
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 180mm
Spine Length: 76mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .7mm
Handle Length: 98mm
Weight: 64g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Line: Proxus 
Made in: Thiers - France
Profile: Paring
Edge Length: 70mm
Blade Height: 20mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 54-56
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: POM
Ferrule/Bolster Material: Stainless Steel
Spine Length: 70mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 95mm
Total Length: 175mm
Weight: 55g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.