In stock

Total Length:  195mm
Blade Length: 105mm
Handle Length: 90mm
Spine Thickness: 2.5mm
Weight: 77g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Nakiri
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless Kurouchi Nashiji
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal
Total Length: 315mm
Edge Length: 162mm 
Spine Length:  180mm
Blade Height: 51mm
Spine Thickness: 1.7mm
Handle Length: 135mm
Weight: 157g 
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 247mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 401mm
Spine Length:  255mm
Blade Height: 49mm
Thickness: 1.8mm
Handle Length: 145mm
Weight: 171g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Total Length: 160mm
Edge Length: 41mm
Weight: 62g

A traditional Japanese marking tool, often used in woodworking. It has a single bevel construction like traditional Japanese kitchen knives, meaning it can get extremely sharp, but needs to be sharpened differently than double bevel knives. The blade can be used in other applications than woodworking, but care must be taken to not damage the very sharp but brittle edge.

Brand:  Hitohira ひとひら (一片)
Made in: Miki, Hyogo - Japan
Line: Harima
Profile: Nakiri
Edge Length: 165mm
Blade Height: 47mm
Edge Steel: Aogami Super/Blue Super
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Walnut w/ Pakka Ferrule
Total Length: 128mm
Spine Length: 180mm
Thickness of Spine at Handle: 4.1mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 128mm
Weight: 162mm
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made In: Miki, Hyogo - Japan
Profile: Bunka
Edge Steel: Yasuki Blue (Aogami) Super
Steel Type: Carbon 
Cladding: Soft Stainless Kurouchi
Bevel: Double
Hand Orientation: Ambidextrous
Handle: Walnut & Pakka Ferrule Octagonal
Total Length: 319mm
Edge Length: 180mm
Spine Length: 190mm
Blade Height: 44.5mm
Thickness at Spine: 3.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Weight: 139mm
Saya: Purchased Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 217mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 373mm
Spine Length:  230mm
Blade Height: 47mm
Thickness: 1.7mm
Handle Length: 142mm
Weight: 154g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in:  Tosa-Kochi/ Japan
Line: Kurouchi
Profile: Japanese Paring Knife
Edge Length: 85mm
Blade Height: 40mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Wa
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 195mm
Spine Length: 95mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 101mm
Weight: 67g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in: Sanjo-Niigata/Japan
Line: TD
Profile: Gyuto
Edge Length: 166mm
Blade Height: 37mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Padauk
Ferrule/Bolster Material: Wenge
Total Length: 307mm
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.0mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 125mm
Weight: 135g
Saya/Guard: Purchase separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel: S45C
Steel Type: Mono (Zenko) Carbon 
HRC: 55-56
Handle: Oak
Total Length: 244mm
Blade Length: 78mm
Thickness at Poll: 24mm
Weight: 631g

Includes a Leather Sheath with snap & Strap.

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel: S45C
Steel Type: Mono (Zenko) Carbon 
HRC: 55-56
Handle: Oak
Total Length: 400mm
Blade Length: 75mm
Thickness at Poll: 21mm
Weight: 660g

Includes a Vinyl Sheath with snap & s string.

Brand: Morihei
Line: Kurouchi White #1
Profile: Gyuto
Edge Steel: Shirogami (White #1)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Pakka Western 
Total Length: 313mm
Edge Length: 179mm
Spine Length: 185mm
Blade Height: 50mm
Thickness at Spine: 2.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 130mm
Weight: 188g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel: S45C
Steel Type: Mono (Zenko) Carbon 
HRC: 55-56
Handle: Oak
Total Length: 460mm
Blade Length: 75mm
Thickness at Poll: 23mm
Weight: 970mm

Includes a Vinyl Sheath with snap & string.