In stock

Strata gift cards!

Gift cards purchased online are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.

***We are experiencing a technical issue with gift cards on our mobile site where you are only able to add $10 gift cards to your shopping cart. We are working to get this resolved asap! If you are running into this problem and are able to make the purchase on a laptop or desktop we would recommend doing so (we are not experiencing this issue on this platform). Otherwise, please reach out to us at info@strataportland.com and we will help finalize the order via email. (updated 12/23/22)

If you want us to mail a physical gift card or want to purchase a gift card in a custom dollar amount we would be happy to help! Just reach out to us at info@strataportland.com to coordinate.

Brand: Ryusen 株式会社 龍泉刃物
Line: TANGANRYU
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Micarta Hybrid
Total Length: 315mm
Edge Length: 170mm
Spine Length: 171mm
Blade Height: 46mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 125mm
Weight: 203g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Ryusen  株式会社 龍泉刃物
Line: BLAZEN Wa
Profile: Santoku
Edge Steel: SG2
Steel Type: Stainless 
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Walnut Wa
Total Length: 315mm
Edge Length: 175mm
Spine Length: 186mm
Blade Height: 46mm
Thickness at Spine: 3.1mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 127mm
Weight: 140g
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Pakka Western
Total Length: 335mm
Edge Length: 214mm
Spine Length: 215mm
Blade Height: 45mm
Thickness at Spine: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 194g

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Hybrid Western
Total Length: 347mm
Edge Length: 204mm
Spine Length: 220mm
Blade Height: 43mm
Thickness at Spine: 2.4mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 125mm
Weight: 178g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle: Black Micarta 
Total Length: 350mm
Edge Length: 208mm
Spine Length: 220mm
Blade Height: 43mm
Thickness at Spine: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 125mm
Weight: 200g

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Hybrid Western
Total Length: 379mm
Edge Length: 231mm
Spine Length: 250mm
Blade Height: 46.5mm
Thickness at Spine: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 126mm
Weight: 217g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Petty/Utility
Edge Steel: VG10
Steel Type: Stainless 
Hardness: 60HRC
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Micarta 
Total Length: 268mm
Edge Length: 146mm
Spine Length: 162mm
Blade Height: 31mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1mm
Handle Length:  105mm
Weight: 75g

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Sujihiki
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Ho Wood Wa
Total Length: 415mm
Edge Length: 262mm
Spine Length: 275mm
Blade Height: 42mm
Thickness at Spine: 2.8mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 140mm
Weight: 159g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 48mm
Thickness at Spine: 3.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Weight: 236g

Brand: HADO
Smith: Shogou Yamatsuka
Sharpener: Tadataka Maruyama
Profile: Petty
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Urushi Wa
Total Length: 281mm
Edge Length: 151mm
Spine Length: 160mm
Blade Height: 31mm
Thickness at Spine: 2.1mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 120mm
Weight: 88g
Saya/Guard: N/A