Other Tools

Length: 56mm

Weight: 25g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

The best nail clippers, really! So sharp, rust-resistant, and include a receptacle to catch nails as you trim.

Brand: ITEZA
Producing Area: Seki-Gifu/ Japan
Product Type: Nail Clipper
Weight: 25g 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Total Length: 195mm
Handle Length: 115mm
Blade Length: 51mm
Max Opening: 103mm
Weight: 207g
Steel Type: Carbon

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Gabriel is among the finest axe makers working today. Over tens of thousands of hours at the forge, he has shaped thousands of axes, hatchets, and tools across an extraordinary range of patterns and purposes. Much of his work is carried out on machinery he designed, built, repaired, or modified himself, reflecting a maker who understands not just the tool, but the entire system behind it. Gabriel was also the founding employee and primary maker at a now well-established regional axe company, where he was hired to design, engineer, build, and operate the complete production process that continues to produce thousands of axes each year.

Since founding New England Axe & Tool (NEAT) in a workshop he once again designed, engineered, and built entirely by hand, from the electrical system to the final stud and finish. Every hammer, set of tongs, die, and stamp is made by Gabriel himself. Every piece of steel, wood, and leather in each NEAT tool is worked solely by Gabriel McNeil.

Gabriel’s work is defined by a rare union of metallurgical insight, mechanical mastery, and hands-on material expertise. The value of his tools is ultimately proven through their durability, balance, and uncompromising performance in use.

Brand: Northeast Axe & Tool
Smith: Gabriel McNeill
Line: Small Pack Axe
Made In: Portland, Maine, USA
Edge Steel: 1050
Steel Type: Carbon
Finish: Kurouchi (forge finish)
Handle Material: Hickory w/ Walnut Wedge
Handle Length: 16"
Cutting Edge: 3"
Head Weight: 12oz
Cover/Sheath: Yes, Leather Cover

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Gabriel is among the finest axe makers working today. Over tens of thousands of hours at the forge, he has shaped thousands of axes, hatchets, and tools across an extraordinary range of patterns and purposes. Much of his work is carried out on machinery he designed, built, repaired, or modified himself, reflecting a maker who understands not just the tool, but the entire system behind it. Gabriel was also the founding employee and primary maker at a now well-established regional axe company, where he was hired to design, engineer, build, and operate the complete production process that continues to produce thousands of axes each year.

Since founding New England Axe & Tool (NEAT) in a workshop he once again designed, engineered, and built entirely by hand, from the electrical system to the final stud and finish. Every hammer, set of tongs, die, and stamp is made by Gabriel himself. Every piece of steel, wood, and leather in each NEAT tool is worked solely by Gabriel McNeil.

Gabriel’s work is defined by a rare union of metallurgical insight, mechanical mastery, and hands-on material expertise. The value of his tools is ultimately proven through their durability, balance, and uncompromising performance in use.

Brand: Northeast Axe & Tool
Smith: Gabriel McNeill
Line: Double Bit Felling Axe
Made In: Portland, Maine, USA
Edge Steel: 1055
Steel Type: Carbon
Finish: Kurouchi (forge finish)
Handle Material: Hickory w/ Walnut Wedge
Handle Length: 29" overall length
Cutting Edge: 8 3/8" Combined 
Head Weight: 2.5lb
Cover/Sheath: Yes, Leather Cover

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Ajikataya 味方屋
Smith: Hinoura Blacksmith 日野浦刃物
Producing Area: Sanjo-Niigata, Japan
Steel Type: Carbon
Steel: White (Shirogami) #2, Soft Iron Clad
Handle: Oak
Total Length: 335mm
Blade Length: 76mm
Thickness at Spine: 7mm
Weight: 616g

Gabriel is among the finest axe makers working today. Over tens of thousands of hours at the forge, he has shaped thousands of axes, hatchets, and tools across an extraordinary range of patterns and purposes. Much of his work is carried out on machinery he designed, built, repaired, or modified himself, reflecting a maker who understands not just the tool, but the entire system behind it. Gabriel was also the founding employee and primary maker at a now well-established regional axe company, where he was hired to design, engineer, build, and operate the complete production process that continues to produce thousands of axes each year.

Since  founding New England Axe & Tool (NEAT) in a workshop he once again designed, engineered, and built entirely by hand, from the electrical system to the final stud and finish. Every hammer, set of tongs, die, and stamp is made by Gabriel himself. Every piece of steel, wood, and leather in each NEAT tool is worked solely by Gabriel McNeil.

Gabriel’s work is defined by a rare union of metallurgical insight, mechanical mastery, and hands-on material expertise. The value of his tools is ultimately proven through their durability, balance, and uncompromising performance in use.

Brand: Northeast Axe & Tool (NEAT)
Smith: Gabriel McNeill
Line: Splitting Axe
Made In: Portland, Maine, USA
Edge Steel: 1055
Steel Type: Carbon
Finish: Kurouchi (forge finish)
Handle Material: Hickory w/ Walnut Wedge
Handle Length: 28"
Cutting Edge: 5.5"
Head Weight: 5lb
Cover/Sheath: Yes, Leather Cover

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Gabriel is among the finest axe makers working today. Over tens of thousands of hours at the forge, he has shaped thousands of axes, hatchets, and tools across an extraordinary range of patterns and purposes. Much of his work is carried out on machinery he designed, built, repaired, or modified himself, reflecting a maker who understands not just the tool, but the entire system behind it. Gabriel was also the founding employee and primary maker at a now well-established regional axe company, where he was hired to design, engineer, build, and operate the complete production process that continues to produce thousands of axes each year.

Since founding New England Axe & Tool (NEAT) in a workshop he once again designed, engineered, and built entirely by hand, from the electrical system to the final stud and finish. Every hammer, set of tongs, die, and stamp is made by Gabriel himself. Every piece of steel, wood, and leather in each NEAT tool is worked solely by Gabriel McNeil.

Gabriel’s work is defined by a rare union of metallurgical insight, mechanical mastery, and hands-on material expertise. The value of his tools is ultimately proven through their durability, balance, and uncompromising performance in use.

Brand: Northeast Axe & Tool
Smith: Gabriel McNeill
Line: Carpenters Axe
Made In: Portland, Maine, USA
Edge Steel: 1055
Steel Type: Carbon
Finish: Kurouchi (forge finish)
Handle Material: Hickory w/ Walnut Wedge
Handle Length: 15" overall length
Cutting Edge: 2.75"
Head Weight: 12oz
Cover/Sheath: Yes, Leather Cover

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Gabriel is among the finest axe makers working today. Over tens of thousands of hours at the forge, he has shaped thousands of axes, hatchets, and tools across an extraordinary range of patterns and purposes. Much of his work is carried out on machinery he designed, built, repaired, or modified himself, reflecting a maker who understands not just the tool, but the entire system behind it. Gabriel was also the founding employee and primary maker at a now well-established regional axe company, where he was hired to design, engineer, build, and operate the complete production process that continues to produce thousands of axes each year.

Since founding New England Axe & Tool (NEAT) in a workshop he once again designed, engineered, and built entirely by hand, from the electrical system to the final stud and finish. Every hammer, set of tongs, die, and stamp is made by Gabriel himself. Every piece of steel, wood, and leather in each NEAT tool is worked solely by Gabriel McNeil.

Gabriel’s work is defined by a rare union of metallurgical insight, mechanical mastery, and hands-on material expertise. The value of his tools is ultimately proven through their durability, balance, and uncompromising performance in use.

Brand: Northeast Axe & Tool
Smith: Gabriel McNeill
Line: Small Pack Axe
Made In: Portland, Maine, USA
Edge Steel: 1055
Steel Type: Carbon
Finish: Kurouchi (forge finish)
Handle Material: Hickory w/ Walnut Wedge
Handle Length: 12", 14" overall 
Cutting Edge: 2.5"
Head Weight: 12oz
Cover/Sheath: Yes, Leather Cover

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.