New!

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Sujihiki
Total Length: 317mm
Internal Length: 292mm
Total Height: 56mm
Internal Height: 45mm
Total Thickness: 11mm
Internal Thickness: 4mm
Weight: 56g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Sujihiki
Total Length: 347mm
Internal Length: 322mm
Total Height: 57mm
Internal Height: 47mm
Total Thickness: 11mm
Internal Thickness: 4mm
Weight: 66g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Petty
Total Length: 189mm
Internal Length: 165mm
Total Height: 43mm
Internal Height: 30mm
Total Thickness: 11.5mm
Internal Thickness: 3.4mm
Weight: 26g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Petty
Total Length: 207mm
Internal Length: 180mm
Total Height: 44mm
Internal Height: 32mm
Total Thickness: 11.5mm
Internal Thickness: 3.7mm
Weight: 32g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material:
Profile:
Total Length: mm
Internal Length: mm
Total Height: mm
Internal Height: mm
Total Thickness: mm
Internal Thickness: mm
Weight: g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Gyuto
Total Length: 288mm
Internal Length: 263mm 
Total Height: 68.5mm
Internal Height: 56mm
Total Thickness: 11mm
Internal Thickness: 3.6mm
Weight: 58g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Gyuto
Total Length: 260mm
Internal Length: 236mm
Total Height: 62mm
Internal Height: 51mm
Total Thickness: 10.5mm
Internal Thickness: 3.7mm
Weight: 45g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Gyuto
Total Length: 320mm
Internal Length: 292mm
Total Height: 70mm
Internal Height: 57mm
Total Thickness: 11mm
Internal Thickness: 3.5mm
Weight: 72g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material:
Profile:
Total Length: mm
Internal Length: mm
Total Height: mm
Internal Height: mm
Total Thickness: mm
Internal Thickness: mm
Weight: g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)  
Profile: Oyster
Edge Length: 97mm
Hand Orientation: Ambidextrious 
Handle: Ho Wood
Total Length: 212mm 
Handle Length: 115mm
Blade Height:  16mm
Thickness of Spine at Handle: 2.8mm
Thickness of Spine Half Way:  2.6mm
Thickness of Spine ~1cm from Tip: 2.4mm
Weight: 83g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  Yoshida Hamono
Made in: Taku City, Saga - Japan
Line: ZDP189 Black(Kurouchi)
Edge Steel: ZDP189
Steel Type: Semi-Stainless
Cladding Material: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle: Rosewood Wa
Total Length: 350mm
Edge Length: 215mm
Spine Length: 223mm
Blade Height: 50mm
Thickness at Spine: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 127mm
Weight: 166g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisement: Semi-Stainless

This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Yoshida Hamono 吉田刃物株式会社
Made in: Taku City, Saga - Japan
Line: ZDP189 Black(Kurouchi)
Profile: Petty
Edge Length: 145mm
Blade Height: 30mm
Edge Steel: ZDP189
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double Bevel 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Total Length: 278mm
Spine Length: 155mm
Thickness at Spine: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 120mm
Weight: 81g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Semi-Stainless

This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Morihei 森平 
Line: Kurouchi White #1
Profile: Gyuto
Edge Length: 183mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Pakka Western (No Bolster)
Total Length: 300mm 
Spine Length: 186mm 
Blade Height: 50mm 
Thickness at Spine: 2.4mm 
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 115mm 
Weight: 162g
Saya/Guard: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Petty/Utility
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Micarta 
Total Length: 264mm
Edge Length: 145mm
Spine Length: 155mm
Blade Height: 29mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length:  107mm
Weight: 90g

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle: Black Micarta 
Total Length: 350mm
Edge Length: 208mm
Spine Length: 220mm
Blade Height: 43mm
Thickness at Spine: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 125mm
Weight: 200g

60HRC Hardness

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Pakka Western
Total Length: 335mm
Edge Length: 214mm
Spine Length: 215mm
Blade Height: 45mm
Thickness at Spine: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 194g

60HRC Hardness

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 48mm
Thickness at Spine: 3.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Weight: 236g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - 1834
Profile: Paring
Edge Length: 98mm
Blade Height: 23mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 201mm
Spine Length: 97mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mmn
Handle Length: 99mm
Weight: 70g
Saya/Guard: Leather Sheath

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

This Aburatsubo is a modern interpretation of a traditional japanese oil applicator. Traditionally, the Aburatsubo consisted of cotton wadding, soaked in Tsubaki oil, contained within a bamboo pot. Tools were dipped into the cotton wadding while working, or pieces of wadding were taken between the fingers to apply oil to larger tools. The modern version is much the same, but with the addition of a wick in the cap to apply oil without needing to oil ones fingers. 

Tsubaki oil, also known as camelia oil, is both highly stable and food safe. It is ideal for use on carbon steel knives to prevent corrosion. You may be sparing with it, as not much is needed to create a working protective layer. Too much oil on the surface can attract dirt and particulate. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.