New!

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 200mm
Blade Height: 45mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 203mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .7mm
Handle Length: 120mm
Total Length: 323mm
Weight: 157g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 125mm 
Blade Height: 28mm 
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5HRC
Construction: Zenko (Mono-Steel)
Cladding: N/A 
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 128mm
Thickness of Spine at Handle: 1.2mm
Thickness ½ way: 0.8mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 104mm 
Total Length: 232mm 
Weight: 75g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki-Gifu, Japan 
Profile: Santoku
Edge Length: 175mm 
Blade Height: 46mm 
Edge Steel: VG10 
Steel Type: Stainless
HRC:  60±0.5
Construction: Zenko (Mono-Steel)
Cladding: N/A 
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 177mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 122mm 
Total Length: 297mm 
Weight: 149g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Sakai Kikumori
Line: Seiun
Made in: Osaka, Sakai - Japan
Smith: Satoshi Nakagawa 中川
Profile: Gyuto
Edge Length: 230mm
Blade Height: 50mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 242mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 135mm
Total Length: 377mm
Weight: 223g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Sakai Kikumori
Line: Seiun
Made in: Sakai - Japan
Smith: Satoshi Nakagawa 
Profile: Gyuto
Edge Length: 201mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 215mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Total Length: 342mm
Weight: 182g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori
Line: Seiun
Made in: Sakai - Japan
Smith: Satoshi Nakagawa 
Profile: Santoku
Edge Length: 170mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 129mm
Total Length: 314mm
Weight: 175mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Roberto Otonello
Made in: Maron, Genoa - Italy
Line: Gravity Knife
Profile: Straight Back
Edge Length: 70mm
Blade Height: 21.8mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Awase/San-Mai
Cladding: N/A
Finish: Damascus
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Material: Stainless Steel
Ferrule/Bolster Material: N/A
Total Length Open: 175mm
Total Length Closed: 100mm
Spine Length: 75mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 1.1mm 
Handle Length: 100mm
Handle Height: 27mm
Handle Thickness: 8mm
Weight: 92g
Saya/Guard: Leather Pouch

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ
Made in: Seki, Gifu - Japan 
Profile: Gyuto
Edge Length: 230mm
Blade Height: 50mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double (Asymmetric) 
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed (Asymmetric) 
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 245mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .6mm
Handle Length: 140mm
Total Length: 384mm
Weight: 150mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki-Gifu, Japan
Line: FJ
Profile: Petty/Utility
Edge Length: 154mm
Blade Height: 30mm
Edge Steel: VG-10 
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length:.163mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6
Thickness ~1cm from Tip: 0.9mm
Handle Length: 124mm
Total Length: 287mm
Weight: 61g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 208mm
Blade Height: 45mm
Edge Steel: Mono VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Monosteel (Sekiso)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 211mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Total Length: 331mm
Weight: 159g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand:  MOKI モキナイフ
Made In: Seki, Gifu - Japan
Line: Banff
Style: Fixed Blade
Profile: Drop Point
Grind: Flat Grind
Blade Steel: VG-10 
Steel Type: Stainless
Blade Length: 86mm
Blade Height: 12.5mm
Blade Thickness: 2.6mm
Blade Construction: Zenko (mono-steel)
Handle/Tang Construction: Full Tang
Bolster: N/A
Pommel: N/A
Handle Material: Linen Micarta
Handle Color: Black
Blade Finish/Color: Mirror Polish
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 98mm
Total Length: 190mm
Weight: 78g 
Sheath/Clip: Leather sheath included
Lanyard Hole: Yes

Brand: Ryusen  株式会社 龍泉刃物
Made in: Echizen, Japan
Line: Botenunryu KAI
Profile: Gyuto
Edge Length: 239mm
Blade Height: 49.3mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Quince and blue dyed maple spacer
Ferrule/Bolster Material: Buffalo horn
Spine Length: 257mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .3mm 
Handle Length: 136mm
Total Length: 394mm
Weight: 165g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu KAI
Profile: Nakiri
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60HRC
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Quince
Total Length: 310mm
Edge Length: 167mm
Spine Length: 188mm
Blade Height: 47.5mm
Thickness at Spine: 3mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 127mm
Weight: 153g

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa 中川
Made in: Sakai, Osaka - Japan
Line: Nakagawa VG10 Damascus
Profile: Kiritsuke Yanagiba
Edge Length: 265mm
Blade Height: 34.5mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Right-Handed Single Bevel
Construction: Awase, Ni-Mai
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 417mm
Spine Length: 277mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 140mm
Weight: 194g
Saya/Guard: Sold Seperately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in:  Seki-Gifu/ Japan
Line: FJ VG10
Profile: Kiritsuke Petty
Edge Length: 146mm
Blade Height: 30mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Convex
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Black Buffalo Horn
Total Length: 275mm
Spine Length: 155mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 121mm
Weight: 55g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: FJ VG10
Profile: Petty
Edge Length: 153mm
Blade Height: 29mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Convex
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Black Buffalo Horn
Total Length: 285mm
Spine Length: 164mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Weight: 60g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: FJ
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: N/A Mono-Steel
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Ho Wood & Buffalo Horn Ferrule Octagonal
Total Length: 358mm
Edge Length: 219mm
Spine Length: 225mm
Blade Height: 45mm
Thickness at Spine: 1.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 134mm
Weight: 111g
Saya: Sold Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Nakagawa VG10
Profile: Kiritsuke Yanagiba
Edge Length: 289mm
Blade Height: 40.5mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase Ni-Mai
Cladding: Soft Stainless
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle: Magnolia Wood 
Total Length: 458mm
Spine Length: 305mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 146mm
Weight: 204g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: FJ
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: N/A Mono-Steel
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Ho Wood & Buffalo Horn Ferrule Octagonal
Total Length: 386mm
Edge Length: 231mm
Spine Length: 246mm
Blade Height: 50mm
Thickness at Spine: 2.3mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 140mm
Weight: 156mm
Saya: Sold Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.