New!

Brand: Kanehide
Made in: Seki - Gifu/ Japan
Line: Hirakiri
Profile: Gyuto
Edge Length: 269mm
Blade Height: 51mm
Edge Steel: Unclassified 
Steel Type: Semi-Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Western (Yo) Handle
Handle Material: Rosewood
Spine Length: 270mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: .8mm
Handle Length: 118mm
Total Length: 387mm
Weight: 199g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Semi-Stainless

This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Farol
Line: Encan
Made In: France
Handle Material: Ebony
Handle Color: Ebony
Locking System: Lever Back
Opening System: Two Finger
Blade Shape: Standard
Blade Steel: Stainless
Blade Length: 90mm
Blade Height: 19mm
Blade Finish/Color: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 123mm
Total Length Open: 215mm
Total Length Closed: 125mm
Spine Thickness: 2.6mm
Weight: 51g
Sheath/Clip: No Clip/Sheath 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Gestura
Made In: Japan
Profile: Plating/Utility Spoon
Steel Type: 18/10 stainless steel
Hand Orientation: Ambidextrous
Total Length: 235mm
Bowl Length: 80mm
Bowl Width: 48mm
Bowl Depth: 10mm
Volume: 1 Table Spoon (1/2 oz)
Handle Length: 155mm
Weight: 55g

A custom utility spoon stamped and finished by hand, designed for control and consistency.

The well is formed deep to cradle liquid - one tablespoon exactly, to help with recipe continuity and reduce the amount of tools needed on hand - and pointed at the tip for precise pouring or basting. The handle is long enough to stir a braise or a pot of beans, and nimble enough to sauce a plate or scrape the corners of a rondeau or quart container. Inspired by the worn and tarnished steel often found at flea markets, and modeled after old American and European silhouettes the spoon is tumbled and unpolished. This creates a matte and imperfect material finish, unique to each piece.  

Packaging is constructed with recycled chipboard.

Brand: K Sabatier
Line: Old Butcher
Made in: Thiers - France
Profile: Butcher
Edge Length: 138mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 140mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Total Length: 268mm
Weight: 95g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Old Butcher
Made in: Thiers - France
Profile: Butcher
Edge Length: 250mm
Blade Height: 42mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 248mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 135mm
Total Length: 385mm
Weight: 181g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Antique
Made in: Thiers - France
Profile: Carving/Slicer
Edge Length: 170mm
Blade Height: 30mm
Edge Steel: Unclassified Vintage
Steel Type: Stainless
HRC: 55-57
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Wood (Unclassified)
Ferrule/Bolster Material: N/A
Spine Length: 170mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 110mm
Total Length: 280mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Auvergne
Made in: Thiers - France
Profile: Petty/Utility
Edge Length: 160mm
Blade Height: 24mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 55-57
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Coral Wood
Ferrule/Bolster Material: Stainless Steel
Spine Length: 160mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 112mm
Total Length: 272mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Made In: Solingen - Germany
Line: Ibex
Style: Folding
Blade Profile: Modified Sheepsfoot 
Grind: Flat
Blade Steel: X50CrMoV15
Steel Type: Stainless
HRC: 57 
Blade Length: 100mm
Blade Height: 23mm 
Blade Thickness: 2.0mm
Blade Construction: Mono-Steel
Frame Construction: Unibody
Opening Mechanism: Nail Nick 
Locking Mechanism: Ratcheting Back Lock
Washers/Pivot System: N/A
Bolster: N/A
Pommel: N/A
Spacer/Spring: N/A
Handle/Scale Material: Plumwood
Handle/Scale Color: Natural Wood
Blade Finish/Color:  Satin
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Length: 140mm
Total Length Open: 245mm
Total Length Closed: 140mm
Total Thickness: 15mm
Weight: 62g
Sheath/Clip: Keychain Ring
Lanyard Hole: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Made In: Solingen - Germany
Line: Ibex
Style: Folding
Blade Profile: Modified Sheepsfoot 
Grind: Flat
Blade Steel: X50CrMoV15 (Stainless chrome-molybdenum-vanadium)
Steel Type: Stainless
HRC: 57 
Blade Length: 100mm
Blade Height: 23mm 
Blade Thickness: 2.0mm
Blade Construction: Zenko (Mono-steel)
Frame Construction: Unibody
Opening Mechanism: Nail Nick 
Locking Mechanism: Lever Action Back Lock
Washers/Pivot System: N/A
Bolster: N/A
Pommel: N/A
Spacer/Spring: N/A
Handle/Scale Material: Olive Wood
Handle/Scale Color: Light brown
Blade Finish/Color:  Migaki (Standard)
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Length: 140mm
Total Length Open: 245mm
Total Length Closed: 140mm
Total Thickness: 15mm
Weight: 68g
Sheath/Clip: Keychain ring
Lanyard Hole: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Line: Buckel Fehrekampf 
Made In: Solingen - Germany
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Steel: Proprietary Stainless
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle: Walnut
Total Length: 220mm
Spine Length: 115mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 48g
Saya/Guard: Comes with leather sheath and gift box

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Made in: Germany
Line: Buckel
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Edge Steel: Undisclosed
Steel Type: Stainless
Construction: Mono-Steel
Finish: Standard
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Walnut
Ferrule/Bolster Material: N/A
Spine Length: 115mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 105mm
Total Length: 220mm
Weight: 38g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira
Made in: Seki, Gifu - Japan
Profile: Honesuki
Steel: Undisclosed Semi-stainless
Steel Type: Semi-stainless
Edge Length: 153mm
Blade Height: 39mm
Construction: Mono
Bevel: Asymmetrical
Hand Orientation: Right
Handle Shape: Rectangular 
Handle Material: Elastomer
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .4mm
Handle Length: 115mm
Total Length: 268mm
Weight: 116g
Saya/Guard: No

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding knife
Blade Profile: Drop point
Grind: Flat Ground
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Handle/Scale Material: Grilon
Handle/Scale Color: Sand Beige
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: None 
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 148mm
Blade Height: 29.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double Bevel (asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle Shape: Western (yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 148mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .2mm
Handle Length: 115mm
Total Length: 257mm
Weight: 88mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic

Brand: K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Butcher
Edge Length: 137mm
Blade Height: 34mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 68mm
Spine Length: 40mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 125mm
Weight: 95g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding Knife
Blade Profile: Drop point
Grind: Flat Grind
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Locking Mechanism: Back Lock  
Handle/Scale Material: Grilon
Handle/Scale Color: Olive Green
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm 
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: N/A
Lanyard Hole: yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding knife
Blade Profile: Drop point
Grind: Flat Ground
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Handle/Scale Material: Grilon
Handle/Scale Color: Mustard Yellow
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: None 
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding Knife
Blade Profile: Drop point
Grind: Flat Grind
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Locking Mechanism: Back Lock
Handle/Scale Material: Grilon
Handle/Scale Color: Cocoa Brown
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm 
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: N/A
Lanyard Hole: yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Higonokami 肥後守
Made In: Miki-Hyogo/ Japan
Smith: Mitsuo Nagao 永尾 光雄
Line: Custom Higonokami
Style: Higonokami
Blade Profile: Kiritsuke
Grind: Wide Double Bevel
Blade Steel: Aogami #2/Blue #2
Steel Type: Carbon
Blade Length: 73mm
Blade Height: 14mm
Blade Thickness: 2.9mm
Blade Construction: Awase/San-Mai
Frame Construction: Mono-Body
Opening Mechanism: Thumb Pad
Locking Mechanism: N/A
Washers/Pivot System: N/A
Bolster: N/A
Pommel: N/A
Spacer/Spring: N/A
Handle/Scale Material: Titanium
Handle/Scale Color: Titanium
Blade Finish/Color: Black
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 98mm
Total Length Open: 172mm
Total Length Closed: 110mm
Total Thickness:  6.1mm
Weight: 35g
Sheath/Clip: Sold Separately
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Windmühlenmesser
Made in: Germany
Line: Classic
Profile: Utility
Edge Length: 103mm
Blade Height: 18.2mm
Edge Steel: Undisclosed Stainless
Steel Type: Stainless
Construction: Mono-Steel
Finish: Standard
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Cherry Wood 
Ferrule/Bolster Material: N/A
Spine Length: 105mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 107mm
Total Length: 210mm
Weight: 30g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.