New! – Tagged "Carbon"– Page 2

Nigara Hamono - Mt. Fuji Mizu Honyaki - White #1 - 300mm Kiritsuke Yanagiba - No Handle

$2,095.00

Brand: Nigara Hamono 二唐刃物鍛造所
Made in: Hirosaki, Aomori - Japan
Smith: Yoshizawa Tsuyoshi 吉澤剛
Line: Mt. Fuji Honyaki
Profile: Kiritsuke Yanagiba
Edge Length: 288mm
Blade Height: 41.3mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Honyaki (differentially hardened), Mt. Fuji Hamon
Cladding: N/A
Finish: Forced Patina, Mt. Fuji Hamono
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 400mm (including tang)
Spine Length: 300mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: N/A
Weight: 200g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Nigara Hamono - Mt. Fuji Mizu Honyaki - White #1 - 300mm Kiritsuke Yanagiba - No Handle

Hitohira - Togashi - Blue #1 Stainless Clad - Migaki - 210mm Gyuto - Ziricote Handle

$525.00

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Profile: Gyuto
Edge Length: 200mm
Blade Height: 52.7mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Stainless Clad
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 360mm
Spine Length: 215mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 146mm
Weight: 174g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon edge and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Togashi - Blue #1 Stainless Clad - Migaki - 210mm Gyuto - Ziricote Handle

Sakai Kikumori - Kikuzuki Kuro - White #2 - 135mm Kiritsuke Petty - Magnolia Handle

$210.00

Brand: Sakai Kikumori 堺菊守
Smith: Yoshikazu Tanaka 田中
Sharpener: Ajioka-san 味岡
Made in: Sakai, Osaka, Japan
Line: Kikuzuki Kuro
Profile: Kiritsuke Petty
Edge Length: 128mm
Blade Height: 30.5mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 264mm
Spine Length: 140mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 124mm
Weight:
Saya/Guard: Purchase Separately

Sakai Kikumori - Kikuzuki Kuro - White #2 - 135mm Kiritsuke Petty - Magnolia Handle

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 170mm Bunka - Walnut Handle

$145.00

Brand: Hitohira ひとひら (一片)
Made in: Japan
Line: TD Blue #2
Profile: Bunka
Edge Length: 172mm
Blade Height: 49mm
Edge Steel: Blue #2
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Kurouchi Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Maple
Total Length: 310mm
Spine Length: 178mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 125mm
Weight: 125g
Saya/Guard: Purchased Separately

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 170mm Bunka - Walnut Handle

Hitohira - Togashi - White #1 Mizu Honyaki - 300mm Sakimaru Yanagiba - Taihei Ebony Handle - Saya

$1,450.00

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Kenji Togashi 富樫
Sharpener: Kenya Togashi (憲哉)
Line: Mizu Honyaki
Profile: Yanagiba Sakimaru
Edge Length: 300mm
Blade Height: 35.5mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Honyaki
Cladding: N/A
Finish: Mirror Polished
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Wa
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length: 457mm
Spine Length: 315mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 148mm
Weight: 262g
Saya/Guard: Yes, saya included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Togashi - White #1 Mizu Honyaki - 300mm Sakimaru Yanagiba - Taihei Ebony Handle - Saya

Morihei - Hisamoto Hagane - 270mm Sujihiki - Western Pakka Handle

$195.00

Brand: Morihei 森平
Made in: Tokyo - Japan
Line: Hisamoto Hagane
Sharpener: Morihei 森平
Profile: Sujihiki
Edge Length:
Blade Height: 40mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length: 405mm
Spine Length: 279mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 123mm
Weight: 197g

Brand: Morihei 森平
Made in: Tokyo - Japan
Smith: N/A
Sharpener: Morihei 森平
Line: Hisamoto Hagane
Profile: Sujihiki
Edge Length: 273mm
Blade Height: 40mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length: 405mm
Spine Length: 279mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 123mm
Weight: 197g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Morihei - Hisamoto Hagane - 270mm Sujihiki - Western Pakka Handle

Kepler Customs - Fixed Blade - 80CRV2 - Ridge Runner - Blue G10 Handle

$195.00

Brand: Kepler Customs
Line: Ridge Runner
Made In: Maine, USA
Style: Fixed Blade
Profile: Drop Point
Grind: Convex
Blade Steel: 80CRV2
Steel Type: Carbon
Blade Length: 70mm
Blade Height: 27mm
Blade Construction: Mono-Steel
Handle/Tang Construction: Rivited
Handle Material: G10
Handle Color: Blue
Blade Finish/Color: Forced Patina
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 95mm
Total Length Open: 170mm
Spine Thickness: 2mm
Weight: 83g
Sheath/Clip: Leather Sheath w/ Clip
Lanyard Hole: Yes

Kepler Customs - Fixed Blade - 80CRV2 - Ridge Runner - Blue G10 Handle

STEELPORT Knife Co. - 52100 Differentially Hardened - 6" Boning Knife - Integral Bolster Maple Burl Handle

$350.00

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Chef Knife
Edge Length: 170mm
Blade Height: 52mm
Edge Steel: 52100
HRC: 65
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 296mm
Spine Length: 175mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 122mm
Weight: 188g
Saya/Guard: Purchased Separately

STEELPORT Knife Co. - 52100 Differentially Hardened - 6" Boning Knife - Integral Bolster Maple Burl Handle

lionSTEEL - Fixed Blade - M5 - Sleipner - 110mm - Black G10 - Leather Sheath

$225.00

Brand: lionSTEEL
Line: M5
Made In: Maniago - Italy
Style: Fixed Blade
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 110mm
Blade Height: 33.5mm
Spine Thickness: 4.3mm
Blade Construction: Mono-Steel
Handle/Tang Construction: SOLID Handle
Bolster: Extended Tang
Pommel: Extended Tang
Handle Material: G10
Handle Color: Black
Blade Finish/Color: Black Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 120mm
Total Length: 240mm
Weight: 240g
Sheath/Clip: Leather Belt Sheath
Lanyard Hole: Yes

lionSTEEL - Fixed Blade - M5 - Sleipner - 110mm - Black G10 - Leather Sheath

lionSTEEL - Fixed Blade - T6B - CPM 3V - 150mm - Green Canvas Micarta - Black Mil Spec - Kydex Sheath

$395.00

Brand: lionSTEEL
Made In: Maniago - Italy
Line: T6
Style: Fixed Blade
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: CPM 3V
Steel Type: Carbon
Blade Length: 150mm
Blade Height: 44.6mm
Blade Thickness: 5.2mm
Blade Construction: Mono-Steel
Handle/Tang Construction: Full Tang
Bolster/Guard: Canvas Micarta
Pommel: Extended Tang
Handle Material: SOLID Canvas Micarta
Handle Color: Green
Blade Finish/Color: Black
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 140mm
Total Length: 295mm
Weight: 372g
Sheath/Clip: Kydex and Nylon Belt Sheath
Lanyard Hole: Yes

lionSTEEL - Fixed Blade - T6B - CPM 3V - 150mm - Green Canvas Micarta - Black Mil Spec - Kydex Sheath

Hitohira - Imojiya MZ - Blue #2 Stainless Clad - 145mm Santoku - Black Western Handle

$80.00

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu, Japan
Line: Imojiya MZ
Profile: Santoku
Edge Length: 145mm
Blade Height: 39mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase/Clad
Cladding: Soft Stainless Clad
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material:
Total Length: 253mm
Spine Length: 150mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchase Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ - Blue #2 Stainless Clad - 145mm Santoku - Black Western Handle

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 165mm Gyuto - Padauk Handle

$125.00

Brand: Hitohira ひとひら (一片)
Made in: Sanjo-Niigata/Japan
Line: TD
Profile: Gyuto
Edge Length: 166mm
Blade Height: 37mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Padauk
Ferrule/Bolster Material: Wenge
Total Length: 307mm
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.0mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 125mm
Weight: 135g
Saya/Guard: Purchase separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 165mm Gyuto - Padauk Handle

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 170mm Bunka - Magnolia D-Shaped Handle

$145.00

Brand: Hitohira ひとひら (一片)
Made in: Sanjo-Niigata/Japan
Line: TD
Profile: Bunka
Edge Length: 171mm
Blade Height: 47mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: D-Shaped
Handle Material: Ho/Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 317mm
Spine Length: 188mm
Thickness of Spine at Handle: 4.6mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 129mm
Weight: 111g
Saya/Guard: Purchase separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 170mm Bunka - Magnolia D-Shaped Handle

lionSTEEL - Fixed Blade - B40 - 100mm - Sleipner - Orange G10 Handle - Stonewashed - Leather Sheath

$220.00

Brand: lionSTEEL
Made In: Maniago, Italy
Line: B40
Style: Fixed Blade
Profile: Drop Point
Grind: Flat Wide Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 103mm
Blade Height: 35mm
Blade Thickness: 3.6mm
Blade Construction: Mono-Steel
Frame Construction: Full Tang
Bolster: N/A
Pommel: Extended Tang w/ Lanyard Hole
Handle Material: G10
Handle Color: Orange
Blade Finish/Color: Stonewashed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 120mm
Total Length Open: 223mm
Total Length Closed: 120mm
Overall Thickness: 19mm
Weight: 179g
Sheath/Clip: Leather Belt Sheath
Lanyard Hole: Yes

lionSTEEL - Fixed Blade - B40 - 100mm - Sleipner - Orange G10 Handle - Stonewashed - Leather Sheath

lionSTEEL - SOLID Folding Knife - SR22 - Sleipner - 75mm - Frame Lock - Black Aluminum - Black Mil Spec

$225.00

Brand: lionSTEEL
Line: SR22
Made In: Maniago - Italy
Style: Folding
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 75mm
Blade Height: 27.9mm
Blade Thickness: 3.8mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Aluminium
Opening Mechanism: Flipper
Locking Mechanism: Frame Lock w/ Rotoblock
Washers/Pivot System: IKBS Ball Bearings
Bolster: N/A
Pommel: Tungsten Carbide Glass Breaker
Spacer/Spring: N/A
Handle/Scale Material: Ergal Aluminum
Handle Color: Black
Blade Finish/Color: Black Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed Lock
Handle Length: 102mm
Total Length Open: 185mm
Total Length Closed: 102mm
Overall Thickness: 14.3mm
Weight: 104g
Sheath/Clip: Reversible Pocket Clip
Lanyard Hole: Yes

lionSTEEL - SOLID Folding Knife - SR22 - Sleipner - 75mm - Frame Lock - Black Aluminum - Black Mil Spec

lionSTEEL - SOLID Folding Knife - SR22 - Sleipner - 75mm - Frame Lock - Red Aluminum - Pocket Clip

$200.00

Brand: lionSTEEL
Line: SR22
Made In: Maniago - Italy
Style: Folding
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 75mm
Blade Height: 28mm
Blade Thickness: 3.8mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Ergal Aluminium
Opening Mechanism: Flipper
Locking Mechanism: Monolithic Frame Lock w/ Rotoblock
Washers/Pivot System: IKBS Ball Bearings
Bolster: N/A
Pommel: Tungsten Carbide Glass Breaker
Spacer/Spring: N/A
Handle/Scale Material: Ergal Aluminum
Handle Color: Red
Blade Finish/Color: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed Lock
Handle Length: 102mm
Total Length Open: 185mm
Total Length Closed: 102mm
Overall Thickness: 14.2mm
Weight: 104g
Sheath/Clip: Reversible Pocket Clip
Lanyard Hole: Yes

lionSTEEL - SOLID Folding Knife - SR22 - Sleipner - 75mm - Frame Lock - Red Aluminum - Pocket Clip

lionSTEEL - SOLID Folding Knife - SR11 - Sleipner - 90mm - Black Aluminum

$250.00

Brand: lionSTEEL
Line: SR11
Made In: Maniago - Italy
Style: Folding
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 90mm
Blade Height: 32mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Aluminium
Opening Mechanism: Flipper
Locking Mechanism: Monolithic Frame Lock
Washers/Pivot System: IKBS Ball Bearings
Spacer/Spring: N/A
Handle/Scale Material: Aluminum
Handle Color: Black
Blade Finish/Color: Black Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed Lock
Handle Length: 120mm
Total Length Open: 215mm
Total Length Closed: 120mm
Spine Thickness: 4.3mm
Weight: 149g
Sheath/Clip: Reversible Pocket Clip w/ Glass Breaker
Lanyard Hole: Yes

lionSTEEL - SOLID Folding Knife - SR11 - Sleipner - 90mm - Black Aluminum

lionSTEEL - SOLID Folding Knife - SR11 - Sleipner - 90mm - Red Aluminum

$250.00

Brand: lionSTEEL
Line: SR11
Made In: Maniago - Italy
Style: Folding
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 90mm
Blade Height: 32mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Ergal Aluminium
Opening Mechanism: Flipper
Locking Mechanism: Monolithic Frame Lock
Washers/Pivot System: IKBS Ball Bearings
Spacer/Spring: N/A
Handle/Scale Material: Ergal Aluminum
Handle Color: Red
Blade Finish/Color: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed Lock
Handle Length: 120mm
Total Length Open: 215mm
Total Length Closed: 120mm
Spine Thickness: 4.3mm
Weight: 149g
Sheath/Clip: Reversible Pocket Clip w/ Glass Breaker
Lanyard Hole: Yes

lionSTEEL - SOLID Folding Knife - SR11 - Sleipner - 90mm - Red Aluminum

lionSTEEL - Folding Knife - KUR - Sleipner - 85mm - Liner Lock - Black G10 - Stone Washed Black Mil Spec

$225.00

Brand: lionSTEEL
Made In: Maniago - Italy
Line: KUR
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 87mm
Blade Height: 33mm
Blade Construction: Mono-Steel
Frame Construction: AISI 420 Stainless
Opening Mechanism: Flipper (removable)
Locking Mechanism: Liner Lock
Washers/Pivot System: IKBS Ball Bearings
Spacer/Spring: 6Al4V Titanium
Handle/Scale Material: Scaled G10
Handle/Scale Color: Black
Blade Finish/Color: Stone Washed Black Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed Liner Lock
Handle Length: 122mm
Total Length Open: 209mm
Total Length Closed: 122m
Spine Thickness: 4.3mm
Weight: 162g
Sheath/Clip: AISI 420 Stainless Clip
Lanyard Hole: Yes

lionSTEEL - Folding Knife - KUR - Sleipner - 85mm - Liner Lock - Black G10 - Stone Washed Black Mil Spec

Hitohira - Togashi - White #1 - Stainless Clad - Migaki - 240mm Sujihiki - Ziricote Handle

$460.00

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Japan
Smith: Kenji Togashi 富樫
Line: White #1 Stainless Clad
Profile: Sujihiki
Edge Length: 229mm
Blade Height: 38mm
Edge Steel: White #1
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 388mm
Spine Length: 243mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 145mm
Weight: 170g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Togashi - White #1 - Stainless Clad - Migaki - 240mm Sujihiki - Ziricote Handle

Morihei - Hisamoto Hagane - 240mm Sujihiki - Western Pakka Handle

$150.00

Brand: Morihei 森平
Made in: Tokyo/ Japan
Smith: N/A
Sharpener: Morihei 森平
Line: Hisamoto Hagane
Profile: Sujihiki
Edge Length:. 245 mm
Blade Height:  43 mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length:  366 mm
Spine Length:  245 mm
Thickness of Spine at Handle:  1.9 mm
Thickness ½ way:  2.0 mm
Thickness ~1cm from Tip:  1.3 mm
Handle Length:  119 mm
Weight:  163 g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.