New! – Tagged "Awase/Clad"– Page 2

Sakai Kikumori - Kikuzuki Kuro - White #2 - 300mm Yanagiba - Magnolia Handle

$295.00

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Smith: Tanaka Uchihamono 田中打刃物
Line: Kikuzuki Kuro
Profile: Yanagiba
Edge Length: 286mm
Blade Height: 35mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase, Ni-Mai
Cladding: Soft Iron
Finish: Kurouchi (forged finish)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 450mm
Spine Length: 303mm
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 3.6mm
Thickness ~1cm from Tip: 2.1mm
Handle Length: 147mm
Weight: 213g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Sakai Kikumori - Kikuzuki Kuro - White #2 - 300mm Yanagiba - Magnolia Handle

Sakai Kikumori - Tomoshibi - White #2 - 120mm Deba - Ho Wood Handle

$150.00

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Tomoshibi
Profile: Deba
Edge Length: 128mm
Blade Height: 43mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Migaki/Standard
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right
Handle Shape: Oval
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn Ferrule
Total Length: 247mmn
Spine Length: 137mm
Thickness of Spine at Handle: 6.2mm
Thickness ½ way: 5.3mm
Thickness ~1cm from Tip: 2.8mm
Handle Length: 111mm
Weight: 149g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Sakai Kikumori - Tomoshibi - White #2 - 120mm Deba - Ho Wood Handle

Hitohira - Harima - Stainless Clad Blue Super - Kurouchi - 210mm Gyuto - Walnut Handle

$195.00

Brand: Hitohira ひとひら (一片)
Made in: Miki, Hyogo - Japan
Line: Harima
Profile: Gyuto
Edge Length: 212mm
Blade Height: 44mm
Edge Steel: Aogami Super/Blue Super
Steel Type: Carbon
Construction: Awase/San-Mai
Cladding: Soft Stainless
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Total Length: 353mm
Spine Length: 226mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 127mm
Weight: 130g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Harima - Stainless Clad Blue Super - Kurouchi - 210mm Gyuto - Walnut Handle

Hitohira - TD - SLD - Nashiji - 240mm Gyuto - Walnut Handle

$195.00

Brand: Hitohira ひとひら
Made in: Sanjo, Niigata - Japan
Line: TD SLD
Profile: Gyuto/Chef
Edge Length: 242mm
Blade Height: 50mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Bird's Eye Maple
Total Length: 398mm
Spine Length: 263mm
Thickness of Spine at Handle: 5.6mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 137mm
Weight: 201g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - TD - SLD - Nashiji - 240mm Gyuto - Walnut Handle

Hitohira - GR - Blue #2 - Damascus - 135mm Petty - Ho Wood Handle

$125.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen-Fukui/ Japan
Line: GR
Profile: Petty
Edge Length: 136mm
Blade Height: 28mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 271mm
Spine Length: 148mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 123mm
Weight: 60g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - GR - Blue #2 - Damascus - 135mm Petty - Ho Wood Handle

Hitohira - TD - Blue #2 - Stainless Clad Kurouchi - 135mm Petty - Padauk Handle

$110.00

Brand: Hitohira ひとひら
Made in: Sanjo-Niigata/ Japan
Line: TD
Profile: Petty
Edge Length: 136mm
Blade Height: 31mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Padauk
Ferrule/Bolster Material: Wenge
Total Length: 257mm
Spine Length: 152mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 105mm
Weight: 85g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - TD - Blue #2 - Stainless Clad Kurouchi - 135mm Petty - Padauk Handle

Hitohira - Futana Stainless Polished - Tsuchime Damascus - 240mm Gyuto - Tagayasan Handle

$195.00

Brand: Hitohira ひとひら
Line: Futana Stainless Polished
Profile: Gyuto/Chef
Edge Length: 243 mm
Blade Height: 47 mm
Edge Steel: AUS-10
Steel Type: Stainless
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Polished Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Tagayasan Wood
Ferrule/Bolster Material: Ebony
Total Length: 404 mm
Spine Length: 260 mm
Thickness of Spine at Handle: 2.1 mm
Thickness ½ way: 1.9 mm
Thickness ~1cm from Tip: 0.9 mm
Handle Length: 145 mm
Weight: 171 g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Futana Stainless Polished - Tsuchime Damascus - 240mm Gyuto - Tagayasan Handle

Hitohira - Kikuchiyo x Rou - Silver #3 - Fully Mirror Polished - 210mm Gyuto - Ebony Handle

$450.00

Brand: Hitohira ひとひら (一片)
Made in: Japan
Smith: Kikuchiyo 菊千代
Sharpener: Rou (老)
Line: Mirror
Profile: Gyuto
Edge Length: 198mm
Blade Height: 48mm
Edge Steel: Ginsanko (Silver 3)
Steel Type: Stainless
Construction: Awase/Clad
Cladding: Soft Stainless Clad
Finish: Fully Mirror Polish
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length: 353mm
Spine Length: 214mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 140mm
Weight: 163g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Kikuchiyo x Rou - Silver #3 - Fully Mirror Polished - 210mm Gyuto - Ebony Handle

Hitohira - Togashi - Blue #1 Stainless Clad - Migaki - 210mm Gyuto - Ziricote Handle

$525.00

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Profile: Gyuto
Edge Length: 200mm
Blade Height: 52.7mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Stainless Clad
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 360mm
Spine Length: 215mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 146mm
Weight: 174g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon edge and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Togashi - Blue #1 Stainless Clad - Migaki - 210mm Gyuto - Ziricote Handle

Sakai Kikumori - Kikuzuki Kuro - White #2 - 135mm Kiritsuke Petty - Magnolia Handle

$210.00

Brand: Sakai Kikumori 堺菊守
Smith: Yoshikazu Tanaka 田中
Sharpener: Ajioka-san 味岡
Made in: Sakai, Osaka, Japan
Line: Kikuzuki Kuro
Profile: Kiritsuke Petty
Edge Length: 128mm
Blade Height: 30.5mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 264mm
Spine Length: 140mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 124mm
Weight:
Saya/Guard: Purchase Separately

Sakai Kikumori - Kikuzuki Kuro - White #2 - 135mm Kiritsuke Petty - Magnolia Handle

RYUSEN - BONTEN UNRYU KAI - VG10 Damascus - 175mm Santoku - Quince Handle

$295.00

Brand: Ryusen 株式会社龍泉刃物
Line: Botenunryu KAI
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Quince
Total Length: 315mm
Edge Length: 175mm
Spine Length: 187mm
Blade Height: 46mm
Thickness at Spine: 2.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .4mm
Handle Length: 128mm
Weight: 127g

RYUSEN - BONTEN UNRYU KAI - VG10 Damascus - 175mm Santoku - Quince Handle

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 170mm Bunka - Walnut Handle

$145.00

Brand: Hitohira ひとひら (一片)
Made in: Japan
Line: TD Blue #2
Profile: Bunka
Edge Length: 172mm
Blade Height: 49mm
Edge Steel: Blue #2
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Kurouchi Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Maple
Total Length: 310mm
Spine Length: 178mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 125mm
Weight: 125g
Saya/Guard: Purchased Separately

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 170mm Bunka - Walnut Handle

Hitohira - T10 - Tsuchime - 130mm Petty - Western Handle

$125.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen-Fukui/ Japan
Line: T10
Profile: Petty
Edge Length: 131mm
Blade Height: 28mm
Edge Steel: V10 Special
Steel Type: Stainless Steel
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Total Length: 249mm
Spine Length: 134mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 109mm
Weight: 71g
Saya/Guard: Purchase Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - T10 - Tsuchime - 130mm Petty - Western Handle

Hitohira - Imojiya MZ - Blue #2 Stainless Clad - 145mm Santoku - Black Western Handle

$80.00

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu, Japan
Line: Imojiya MZ
Profile: Santoku
Edge Length: 145mm
Blade Height: 39mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase/Clad
Cladding: Soft Stainless Clad
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material:
Total Length: 253mm
Spine Length: 150mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchase Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ - Blue #2 Stainless Clad - 145mm Santoku - Black Western Handle

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 165mm Gyuto - Padauk Handle

$125.00

Brand: Hitohira ひとひら (一片)
Made in: Sanjo-Niigata/Japan
Line: TD
Profile: Gyuto
Edge Length: 166mm
Blade Height: 37mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Padauk
Ferrule/Bolster Material: Wenge
Total Length: 307mm
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.0mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 125mm
Weight: 135g
Saya/Guard: Purchase separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 165mm Gyuto - Padauk Handle

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 170mm Bunka - Magnolia D-Shaped Handle

$145.00

Brand: Hitohira ひとひら (一片)
Made in: Sanjo-Niigata/Japan
Line: TD
Profile: Bunka
Edge Length: 171mm
Blade Height: 47mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: D-Shaped
Handle Material: Ho/Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 317mm
Spine Length: 188mm
Thickness of Spine at Handle: 4.6mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 129mm
Weight: 111g
Saya/Guard: Purchase separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - TD - Blue #2 Stainless Clad - Kurouchi - 170mm Bunka - Magnolia D-Shaped Handle

Hitohira - Togashi - White #1 - Stainless Clad - Migaki - 240mm Sujihiki - Ziricote Handle

$460.00

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Japan
Smith: Kenji Togashi 富樫
Line: White #1 Stainless Clad
Profile: Sujihiki
Edge Length: 229mm
Blade Height: 38mm
Edge Steel: White #1
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 388mm
Spine Length: 243mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 145mm
Weight: 170g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Togashi - White #1 - Stainless Clad - Migaki - 240mm Sujihiki - Ziricote Handle

Hitohira - Futana - Super Blue - Migaki - 270mm Sujihiki - Cherry Handle

$240.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen, Japan
Line: Super Blue Migaki
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 32mm
Edge Steel: Super Blue
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 433mm
Spine Length: 281mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145mm
Weight: 135g
Saya/Guard: Purchased Separatley

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Futana - Super Blue - Migaki - 270mm Sujihiki - Cherry Handle

Hitohira - Hinode - White #2 Nashiji - 270mm Sujihiki - Ho Wood Handle

$260.00

Brand: Hitohira
Line: Hinode
Profile: Sujihiki
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood Wa
Total Length: 425mm
Edge Length: 276mm
Spine Length: 292mm
Blade Height: 38mm
Thickness at Spine: 4.7mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 132mm
Weight: 159g
Saya/Guard: No

Hitohira - Hinode - White #2 Nashiji - 270mm Sujihiki - Ho Wood Handle

Ajikataya - White #2 - Kurouchi Nashiji - 270mm Sujihiki - Magnolia Handle

$295.00

Brand: Ajikataya
Made in: Sanjo, Japan
Line: Nashiji
Profile: Sujihiki
Edge Length: 280mm
Blade Height: 44mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Wide Bevel
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 440mm
Spine Length: 295mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144mm
Weight: 182g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Ajikataya - White #2 - Kurouchi Nashiji - 270mm Sujihiki - Magnolia Handle

Hitohira - Kikuchiyo x Izo - Silver #3 - 210mm Gyuto - Yakusugi Cedar Handle

$395.00

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Made in: Sakai, Osaka, Japan
Line: Kikuchiyo x Izo
Profile: Gyuto
Edge Length: 200mm
Blade Height: 49mm
Edge Steel: Silver #3 (Ginsanko)
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Yakusugi Cedar
Ferrule/Bolster Material: Buffalo Horn
Total Length: 360mm
Spine Length: 214mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 144mm
Weight: 137g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.