New!

Brand:  Hitohira ひとひら
Made in:  Sakai, Osaka - Japan
Smith:  Tanaka Uchihamono 田中打刃物
Sharpener:  Mosuke モスケ
Line:  Tanaka x Mosuke
Profile:  Kiritsuke Yanagiba
Edge Length:  291mm
Blade Height:  36mm
Edge Steel:  Aogami #1/Blue #1
Steel Type:  Carbon
Construction:  Awase, San-Mai
Cladding:  Soft Iron
Finish:  Migaki (standard)
Bevel:  Single
Bevel Symmetry:  0/100
Hand Orientation:  Right-Handed
Handle Shape:  Oval Octagonal
Handle Material:  Magnolia Wood
Ferrule/Bolster Material:  Buffalo Horn
Total Length:  448mm
Spine Length:  305mm
Thickness of Spine at Handle:  4.0mm
Thickness ½ way:  3.1mm
Thickness ~1cm from Tip:  2.4mm
Handle Length:  143mm
Weight:  207g
Saya/Guard:  Saya

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Made In: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Line: Aogami Super
Profile: Takobiki
Edge Length: 280mm
Blade Height: 33.7mm
Edge Steel: Super Blue (Aogami Super)
Steel Type: Carbon
Grind: Single Bevel
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Iron
Finish: Kasumi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 410mm
Spine Length: 390mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 2.3mm
Handle Length: N/A - tang is signed
Weight: 142g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Smith: Yoshikazu Tanaka  田中
Made in: Sakai, Osaka, Japan
Line: Aogami Super Kasumi
Profile: Takobiki
Edge Length: 308mm
Blade Height: 34.5mm
Edge Steel: Aogami Super/Blue Super
Steel Type: Carbon
Grind: Single Bevel
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Iron
Finish: Kasumi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: Buffalo Horn
Total Length: 308mm
Spine Length: 320mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 2.3mm
Handle Length: N/A - tang is signed
Weight: 173g
Saya/Guard: Purchased Separately

Brand: Nakaya Heiji 中屋平次 
Made in: Mito City, Ibaraki - Japan
Smith: Nakaya Heiji 中屋平次
Sharpener: Nakaya Heiji 中屋平次
Line: Semi Stainless
Profile: Gyuto/Chef
Edge Length: 300mm
Blade Height: 34.7mm
Edge Steel: Semi Stainless
Steel Type: Carbon
Construction: Awase/Ni-Mai
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Oak
Ferrule/Bolster Material: Buffalo Horn Ferrule
Total Length: 432mm
Spine Length: 287mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144.5mm
Weight: 238g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi
Profile: Gyuto
Edge Length: 200mm
Blade Height: 52.7mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Stainless Clad 
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Ziricote 
Ferrule/Bolster Material: Buffalo Horn
Total Length: 360mm
Spine Length: 215mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 146mm
Weight: 174g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon edge and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Made in: Sakai, Osaka, Japan
Line: Kikuchiyo x Izo
Profile: Gyuto
Edge Length: 200mm
Blade Height: 49mm
Edge Steel: Silver #3 (Ginsanko)
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Yakusugi Cedar
Ferrule/Bolster Material: Buffalo Horn
Total Length: 360mm
Spine Length: 214mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 144mm
Weight: 137g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Forge De Laguiole
Line: Special Edition 
Made In: Laguiole, France
Style: Steak Knife
Steel Type: Stainless
Blade Length: 105mm
Blade Height:20mm
Blade Construction: Mono-Steel
Bolster: Stainless Steel
Pommel: Stainless Steel
Handle Material: Wine Stained Wine Barrel
Handle Color: Burgundy & Wood
Blade Finish/Color: Matte/Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 124mm
Total Length: 233mm
Spine Thickness: 1.8mm
Weight: 94g/Each
Storage: FDL Sleeve Style Box

Brand: Merion Forge
Smith: Dominik Filip
Sharpener: Dominik Filip
Made in: Dolní Lutyně - Czech Republic
Profile: Gyuto
Edge Length: 216mm
Blade Height: 56.2mm
Edge Steel: 1.2562 W
HRC: 63-64
Steel Type: Carbon
Grind: Convex
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Coracao de Negro
Ferrule/Bolster Material: Black Horn
Total Length: 362mm
Spine Length: 233mm
Thickness of Spine at Handle: 4.6mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 130mm
Weight: 232g
Saya/Guard: Sold Seperately 

Brand: Merion Forge
Smith: Dominik Filip
Sharpener: Dominik Filip
Made in: Dolní Lutyně - Czech Republic
Profile: Gyuto
Edge Length: 185mm
Blade Height: 50.2mm
Edge Steel: 1.2562 W
HRC: 63-64
Steel Type: Carbon
Grind: Convex
Construction: Awase/San-Mai
Cladding: Nickel Damascus
Finish: Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal Wa
Handle Material: Stabilized Birch  
Ferrule/Bolster Material: Black Horn
Total Length: 329mm
Spine Length: 200mm
Thickness of Spine at Handle: 5.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 128mm
Weight: 213g
Saya/Guard: Sold Seperately 

Brand: Isamitsu 安倍勇光打ち刃物
Smith: Abe Isamitsu Blacksmith 安倍勇光打ち刃物
Made in: Ibaraki, Japan
Line: Super Blue Stainless Clad
Profile: Gyuto
Edge Length: 244mm
Blade Height: 54mm
Edge Steel: Super Blue
Steel Type: Carbon
Grind: Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Taihei Rosewood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 404mm
Spine Length: 258mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 225g
Saya/Guard: Purchased Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa 中川
Made in: Sakai, Osaka - Japan
Line: Nakagawa VG10 Damascus
Profile: Kiritsuke Yanagiba
Edge Length: 265mm
Blade Height: 34.5mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Right-Handed Single Bevel
Construction: Awase, Ni-Mai
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 417mm
Spine Length: 277mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 140mm
Weight: 194g
Saya/Guard: Sold Seperately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Goyon Chazeau
Line: Styl'ver
Made In: France
Style: Steak Knife
Blade Steel: Stainless
Blade Length: 115mm
Blade Height:19mm
Blade Construction: Mono-Steel
Bolster: Stainless
Handle Material: Snakewood
Handle Color: Dark Brown
Blade Finish/Color: Mirror Polsihed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 120mm
Total Length:  240mm
Spine Thickness: 1.9mm
Weight: 135g/Each
Storage: Wooden Box

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Nakaya Heiji 中屋平次
Smith:  Nakaya Heiji 中屋平次
Sharpener: Nakaya Heiji 中屋平次
Made in: Hito City, Ibaraki - Japan
Line: Nakaya Heiji 中屋平次
Profile: Sujihiki
Edge Length: 286mm
Blade Height: 39mm
Edge Steel: Undisclosed
Steel Type: Semi-Stainless
Grind: Wide Double Bevel
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Chestnut
Ferrule/Bolster Material: Buffalo Horn
Total Length: 445mm
Spine Length: 300mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 145mm
Weight: 201g
Saya/Guard: Sold Seperately

Brand: Nakaya Heiji 中屋平次
Smith:  Nakaya Heiji 中屋平次
Sharpener:  Nakaya Heiji 中屋平次
Made in: Hito City, Ibaraki - Japan
Line: Semi-Stainless Migaki
Profile: Gyuto
Edge Length: 265mm
Blade Height: 52mm
Edge Steel: Undisclosed Swedish Semi-Stainless
Steel Type: Semi-Stainless
Grind: Wide Double Bevel
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Chestnut
Ferrule/Bolster Material: Buffalo Horn
Total Length: 425mm
Spine Length: 278mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 149mm
Weight: 238g
Saya/Guard: Sold Seperately

Brand: Morihei 森平
Made in: Sakai, Osaka, Japan
Line: Hisamoto Thick
Profile: Gyuto
Edge Length: 308mm
Blade Height: 60mm
Edge Steel: White #1
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Steel
Total Length: 455mm
Spine Length: 310mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 461g
Saya/Guard: Purchased Separately
 
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Made in: Sakai, Osaka - Japan
Line: Blue #1 Kikko
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 36mm
Edge Steel: Blue #1
Steel Type: Carbon
Construction: Awase/Clad, Nimai
Cladding: Soft Iron 
Finish: Damascus
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle Shape: Octagonal Wa
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 448mm
Spine Length: 303mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 145mm
Weight: 235g
Saya/Guard: Included

 

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in:  Seki-Gifu/ Japan
Line: FJ SG2 Mirror
Profile: Bunka
Edge Length: 179mm
Blade Height: 47mm
Edge Steel: SG2 Powder Metal
Steel Type: Stainless
Grind: Convex
Construction: Awase Clad
Cladding: Stainless
Finish: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Linen Micarta
Ferrule/Bolster Material: Stainless Steel
Total Length: 296mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 173g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Blacksmith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Made in: Sakai, Osaka - Japan
Line: Enmon
Profile: Kiritsuke
Edge Length: 200mm
Blade Height: 42mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Grind: Right Handed Convex
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Mirror Polished Hira, Kasumi Damascus Kireha
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: Oval Octagonal 
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length:  355mm
Spine Length:  210mm
Thickness at Spine: 3.8mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 140mm
Weight: 205g
Saya/Guard: Magnolia Saya

 

Brand: Netherton Foundry
Made In: Shropshire, England
Line: Spun Iron
Materials: Spun Iron
Outer Diameter: 520mm
Inner Diameter: 510mm
Thickness: 2mm
Height: 260mm
Handle Length: Prospector Handles
Pan Weight: 6.5kg

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa
Made in: Sakai, Japan
Line: Blue #1 Damascus
Profile: Gyuto
Edge Length: 230mm
Blade Height: 50.5mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus/Sekiso
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Wa
Handle Material: Magnolia Wood, Buffalo Horn
Total Length: 378mm
Spine Length: 243mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1mm
Handle Length: 133mm
Weight: 192g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa
Made in: Sakai, Osaka - Japan
Line: Blue #1 Damascus
Profile: Gyuto
Edge Length: 201mm
Blade Height: 46.6mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus/Sekiso
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Wa
Handle Material: Magnolia/Ho Wood, Buffalo Horn Ferrule
Total Length: 341mm
Spine Length: 218mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 126mm
Weight: 151g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.