New!

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Line: Ashi Hamono
Profile: Gyuto
Edge Length: 261mm
Blade Height: 50mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 275mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 151mm
Total Length: 426mm
Weight: 172g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Sujihiki
Edge Length: 229mm
Blade Height: 35mm
Edge Steel: Swedish Stainless
Steel Type: Stainless
Construction: 
Cladding: Zenko (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 242mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 145mm
Total Length: 386mm
Weight: 106g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Sujihiki
Edge Length: 230mm
Blade Height: 35mm
Edge Steel: Swedish Stainless
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 243mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 143mm
Total Length: 382mm
Weight: 102g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ VG10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 166mm
Blade Height: 49mm
Edge Steel: Mono VG10
Steel Type: Stainless
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Taihei Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 314mm
Weight: 107g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Kikuchiyo x Kyuzo
Made in: Sakai, Osaka - Japan
Smith: Kikuchiyo 菊千代
Sharpener: Kyūzō 久蔵
Profile: Santoku
Edge Length: 164mm
Blade Height: 48mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry Wood
Ferrule/Bolster Material: Ebony
Spine Length: 182mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 135mm
Total Length: 315mm
Weight: 138g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Harima Forged
Made in: Miki, Hyogo - Japan
Profile: Santoku/Home Chef
Edge Length: 166mm
Blade Height: 45mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Stainless
Finish: Nickel Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 181mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 128mm
Total Length: 307mm
Weight: 114g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら
Line: Ashi
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Gyuto
Edge Length: 246mm
Blade Height: 48mm
Edge Steel: Swedish Stainless Steel
HRC: ±59
Steel Type: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 247mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 126mm
Total Length: 373mm
Weight: 214g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan 
Smith: Tanaka Blacksmith 田中打刃物製作所 
Sharpener: Ren
Line: Tanaka x Ren
Profile: Santoku
Edge Length: 171mm
Blade Height: 46mm
Edge Steel: White #2
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 133mm
Total Length: 317mm
Weight: 128mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Petty
Edge Length: 127mm 
Blade Height: 36mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 140mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 113mm
Total Length: 252mm
Weight: 115g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Bread Knife/Pankiri
Edge Length: 273mm
Blade Height: 46mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 281mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 121mm
Weight: 200g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Bread Knife/Pankiri
Edge Length: 273mm
Blade Height: 46mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 281mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 121mm
Weight: 200g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Bread Knife/Pankiri
Edge Length: 273mm
Blade Height: 46mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 281mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 121mm
Weight: 200g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 35mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 280mm 
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 116mm
Weight: 250g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 35mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 280mm 
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 116mm
Weight: 250g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 35mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 280mm 
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 116mm
Weight: 250g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 35mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 280mm 
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 116mm
Weight: 250g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 35mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 280mm 
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 116mm
Weight: 250g
Saya/Guard: Sold Separately 

Brand: Hitohira ひとひら (一片)
Line: Echizen 
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.