New!

Brand: Hitohira ひとひら 
Made in: Tosa-Kochi/ Japan
Line: Blue #1
Profile: Santoku
Edge Length: 165mm
Blade Height: 46mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 178mm
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 128mm
Total Length: 305mm
Weight: 150g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka -Japan
Smith: Kikuchiyo 菊千
Line: Gorobei x Ren
Profile: Santoku
Edge Length: 170mm
Blade Height: 45.5mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Carbon Damascus
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .2mm
Handle Length: 133mm
Total Length: 315mm
Weight: 134g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Line: Hinode
Profile: Nakiri
Edge Length: 155mm
Blade Height: 51.5mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon 
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double 
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous 
Handle Shape: D-Shape
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 133mm
Total Length: 318mm
Weight: 175g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Imojiya KF
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 184mm
Blade Height: 41mm
Edge Steel: Mono Molybdenum Steel
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetric)
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 187mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 116mm
Total Length: 303mm
Weight: 165bg
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Line: YG
Profile: Santoku/Home Chef
Edge Length: 168mm
Blade Height: 50mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Nashiji (textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 182mm
Thickness of Spine at Handle: 5.3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 128mm
Total Length: 310mm
Weight: 138g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 183mm
Blade Height: 49mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.5mm
Handle Length: 117mm
Total Length: 302mm
Weight: 222g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ VG10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 166mm
Blade Height: 49mm
Edge Steel: Mono VG10
Steel Type: Stainless
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Taihei Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 314mm
Weight: 107g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Miyazaki Kaijya
Line: Hineri Damascus
Made in: Goto Islands, Nagasaki - Japan
Smith: Haruo Miyazaki 宮崎 春生
Sharpener: Haruo Miyazaki 宮崎 春生
Profile: Tsubaki (Bunka)
Edge Length: 175mm
Blade Height: 53mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon Steel
Construction: Awase (Clad), Warikomi
Cladding: Soft Iron Damascus 
Finish: Forced Patina
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Oval Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length:  192mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1mm
Thickness ~1cm from Tip: .5mm
Handle Length: 134mm
Total Length: 324mm
Weight: 153g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Tosa
Made in: Tosa, Kochi - Japan
Profile: Santoku/Home Chef
Edge Length: 165mm
Blade Height: 47.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Double 
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Oval Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 173mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 127mm
Total Length: 300mm
Weight: 128g
Saya/Guard: Sold Separately 

Brand: Morihei 森平 
Line:  Kikuyu
Profile: Nakiri 
Edge Length: 159mm
Blade Height: 51mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Carbon Damascus
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 181mm
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 133mm
Total Length: 315mm
Weight: 129g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Harima Forged
Made in: Miki, Hyogo - Japan
Profile: Santoku/Home Chef
Edge Length: 166mm
Blade Height: 45mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Stainless
Finish: Nickel Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 181mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 128mm
Total Length: 307mm
Weight: 114g
Saya/Guard: Sold Separately

Brand: Morihei 森平
Line: Kikuyu
Profile: Nakiri
Edge Length: 157mm
Blade Height: 50mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Carbon Damascus
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Wenge
Ferrule/Bolster Material: N/A
Spine Length: 183mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 130mm
Total Length: 311mm
Weight: 130g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Made in: Sakai-Osaka/ Japan
Smith: Kikuchiyo 菊千代
Sharpener: Rikichi 利吉
Line: Kikuchiyo x Rikichi
Profile: Deba 
Edge Length: 168mm
Blade Height: 52mm
Edge Steel: Yasuki Silver #3 (Ginsan)
Steel Type: Stainless 
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless 
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Ho Wood 
Ferrule/Bolster Material: Buffalo Horn 
Spine Length: 187mm
Thickness of Spine at Handle: 6.1mm
Thickness ½ way: 5.8mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 126mm
Total Length: 311mm
Weight: 253g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: MZ Chromax
Profile: Gyuto
Edge Length: 182mm
Blade Height: 43mm
Edge Steel: V-G1
Steel Type: Semi Stainless Steel 
Construction: Awase, San Mai
Cladding: Soft Stainless Clad
Finish: Migaki 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 187mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 118mm
Total Length: 304mm
Weight: 162g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan 
Smith: Tanaka Blacksmith 田中打刃物製作所 
Sharpener: Ren
Line: Tanaka x Ren
Profile: Santoku
Edge Length: 171mm
Blade Height: 46mm
Edge Steel: White #2
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 133mm
Total Length: 317mm
Weight: 128mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Total Internal Length:
Height at Opening:
Width of Opening at Spine:
Width of Opening at Edge:

Saya do not come with a pre-drilled hole for the fastening pin. If you would like your saya fitted to your knife, please leave a message at checkout or call/email us. We need the EXACT knife you want the pin fastened to, NOT even an identical version we may have in backstock (handmade products vary slightly from one another). If you have questions please contact us.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Santoku
Edge Length: 173mm 
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 184mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 128mm
Total Length: 311mm
Weight: 166g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Nakiri
Edge Length: 164mm 
Blade Height: 59mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 176mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 136mm
Total Length: 312mm
Weight: 199g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Santoku
Edge Length: 177mm
Blade Height: 52mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 189mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 128mm
Total Length: 317mm 
Weight: 173g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: lionSTEEL
Made In: Maniago - Italy
Line: M7
Style: Fixed 
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 155mm
Blade Height: 44.3mm
Blade Thickness: 5.4mm
Blade Construction: Mono-Steel
Handle/Tang Construction: SOLID Handle
Bolster: N/A
Pommel: Extended Tang
Handle Material: Canvas Micarta
Handle Color: Green
Blade Finish/Color: Black Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 131.5mm
Total Length: 320mm
Weight: 428g
Sheath/Clip: Kydex Belt Sheath
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.