Morihei

Brand: Morihei 森平 
Line: Hisamoto INOX
Profile: Petty
Edge Length: 120mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 58-60 
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed 
Handle: Pakka Western
Total Length: 230mm
Spine Lengh 130mm
Blade Height: 27mm
Thickness: 1.5mm
Handle Length: 100mm
Weight: 72g
Final Edge: Morihei 森平

 CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Morihei 森平
Line: Hisamoto INOX
Profile: Petty
Edge Length: 150mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 58-60 
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 255mm
Spine Lengh 160mm
Blade Height: 28mm
Thickness: 1.6mm
Handle Length: 104mm
Weight: 81g
Final Edge: Morihei 森平
Saya/Guard: N/A

 

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Morihei 森平
Line: Hisamoto INOX
Profile: Gyuto
Edge Length: 210mm
Edge Steel: SUS-440
Steel Type: Stainless Steel
HRC: 58-60
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Handed
Handle: Pakka Western
Total Length: 328mm
Spine Length: 216mm
Blade Height: 47mm
Thickness: 1.8mm
Handle Length: 119mm
Weight: 161g
Final Edge: Morihei 森平
Saya/Guard: N/A

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Line: Hisamoto Tsuchime
Profile: Nakiri
Edge Length: 164mm
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, Sanmai
Cladding: Stainless
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 316mm
Spine Length: 184mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1mm
Handle Length: 134mm
Weight: 161g
Saya/Guard: Purchased Separately

 

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Morihei
Line: Kurouchi White #1
Profile: Gyuto
Edge Steel: Shirogami (White #1)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Pakka Western 
Total Length: 313mm
Edge Length: 179mm
Spine Length: 185mm
Blade Height: 50mm
Thickness at Spine: 2.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 130mm
Weight: 188g
Saya/Guard: N/A

 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平
Made in: Sakai, Osaka, Japan
Line: Hisamoto Thick
Profile: Gyuto
Edge Length: 308mm
Blade Height: 60mm
Edge Steel: White #1
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Steel
Total Length: 455mm
Spine Length: 310mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 461g
Saya/Guard: Purchased Separately
 
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Made in: Tokyo - Japan
Line: Hisamoto Stainless Clad
Profile: Gyuto
Edge Length: 213mm
Blade Height: 50mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Tsuchime, Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 340mm
Spine Length: 214mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 125mm
Weight: 220g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Made in: Tokyo/ Japan 
Smith: N/A
Sharpener: Morihei 森平
Line: Hisamoto Hagane 
Profile: Sujihiki
Edge Length:. 245 mm
Blade Height:  43 mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel 
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length:  366 mm
Spine Length:  245 mm
Thickness of Spine at Handle:  1.9 mm
Thickness ½ way:  2.0 mm
Thickness ~1cm from Tip:  1.3 mm
Handle Length:  119 mm
Weight:  163 g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.


Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Morihei 森平
Made in: Tokyo - Japan
Line: Hisamoto Hagane
Sharpener: Morihei 森平
Profile: Sujihiki
Edge Length: 
Blade Height: 40mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length: 405mm
Spine Length: 279mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 123mm
Weight: 197g

Brand: Morihei 森平
Made in: Tokyo - Japan
Smith: N/A
Sharpener: Morihei 森平
Line: Hisamoto Hagane
Profile: Sujihiki
Edge Length: 273mm
Blade Height: 40mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length: 405mm
Spine Length: 279mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 123mm
Weight: 197g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Morihei 森平
Line: Hisamoto INOX
Profile: Santoku
Edge Steel: SUS-440
Steel Type: Stainless
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: 60/40
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 287mm
Edge Length: 165mm
Spine Length: 170mm
Blade Height: 47mm
Thickness: 1.5mm
Handle Length: 115mm
Weight: 150g

 

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Line: Hisamoto INOX
Profile: Gyuto
Edge Length: 
Edge Steel: SUS-440
Steel Type: Stainless Steel
HRC: 58-60
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 
Spine Length: 
Blade Height: 
Thickness: 
Handle Length: 
Weight: 
Final Edge: Morihei 森平

 

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Morihei
Made in: Echizen, Japan
Line: Hisamoto Inox
Profile: Kiritsuke Sujihiki
Edge Length: 240mm
Blade Height: 35mm
Edge Steel:  SUS-440
Steel Type: Stainless
Grind: Convex
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Total Length: 360
Spine Length: 245mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Weight: 164g
Saya/Guard: Purchased Separately 

Brand: Morihei 森平
Line: Hisamoto Inox
Profile: Kiritsuke Sujihiki
Edge Length: 270mm
Blade Height: 39.3mm
Edge Steel: SUS-440
Steel Type: Stainless
Grind: Flat
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Total Length: 390mm
Spine Length: 275mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Weight: 176g
Saya/Guard: Purchased Separately 

Total Length: 160mm
Edge Length: 41mm
Weight: 62g

A traditional Japanese marking tool, often used in woodworking. It has a single bevel construction like traditional Japanese kitchen knives, meaning it can get extremely sharp, but needs to be sharpened differently than double bevel knives. The blade can be used in other applications than woodworking, but care must be taken to not damage the very sharp but brittle edge.

 

Brand: Morihei 森平
Line: Hisamoto INOX
Profile: Gyuto
Edge length: 270mm
Edge Steel: SUS-440
Steel Type: Stainless Steel
HRC: 58-60 
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 405mm
Spine Length: 276mm
Blade Height: 54mm
Thickness: 2.6mm
Handle Length: 130mm
Weight: 249g
Final Edge: Morihei 森平

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.