PLEASE BE AWARE OF A FAKE/SCAM WEBSITE CLAIMING TO BE US
www.strataportland.SHOP is the fake site, www.strataportland.COM is our real site.
Soma - Standard Chef's Set - 80CRV2 Carbon - Kurouchi - 155mm Kiritsuke Gyuto - Walnut Handle
Brand: Soma Metalwork
Smith: Kiran Chapman
Sharpener: Kiran Chapman
Made in: North Yarmouth, ME
Line: Standard Chef's Set
Profile: Kiritsuke Gyuto
Edge Length: 158mm
Blade Height: 46mm
Edge Steel: 80CRV2
Steel Type: Carbon
Grind: Wide Bevel
Construction: Mono-Steel
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Total Length: 293mm
Spine Length: 160mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 134mm
Weight: 106g
Saya/Guard: Purchased Separately
Handmade in Maine by Soma Metalwork.
Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Soma - Standard Chef's Set - 80CRV2 Carbon - Kurouchi - 190mm Kiritsuke Gyuto - Walnut Handle
Brand: Soma Metalwork
Smith: Kiran Chapman
Sharpener: Kiran Chapman
Made in: North Yarmouth, ME
Line: Standard Chef's Set
Profile: Kiritsuke Gyuto
Edge Length: 192mm
Blade Height: 50mm
Edge Steel: 80CRV2
Steel Type: Carbon
Grind: Wide Bevel
Construction: Mono-Steel
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Total Length: 338mm
Spine Length: 197mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 142mm
Weight: 142g
Saya/Guard: Purchased Separately
Handmade in Maine by Soma Metalwork.
Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
