Japan

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月 
Profile: Gyuto
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Zenko, Mono-steel
Bevel: Double
Bevel Symmetry: 20:80
Hand Orientation: Right-Handed
Handle: Pakka Western
Total Length: 371mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 52mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 121mm
Weight: 234g
Saya/Guard: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Ashi
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Gyuto
Edge Length: 246mm
Blade Height: 48mm
Edge Steel: Swedish Stainless Steel
HRC: ±59
Steel Type: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 247mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 126mm
Total Length: 373mm
Weight: 214g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ
Made in: Seki-Gifu, Japan
Profile: Gyuto/Chef
Edge Length: 240mm
Blade Height: 50mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 242mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Total Length: 365mm
Weight: 206g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Gyuto
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Wa
Total Length: 402mm
Edge Length: 242mm
Spine Length: 257mm
Blade Height: 48mm
Spine Thickness at Handle: 3.1mm
Spine Thickness 1cm from Tip: 0.8mm
Handle Length: 145mm
Weight: 163g
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Japan
Line: Futana Ginsan Nashiji
Profile: Gyuto
Edge Length: 244mm
Blade Height: 49mm
Edge Steel: Ginsanko
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Stainless
Total Length: 375mm
Spine Length: 245mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 124mm
Weight: 225g
Saya/Guard: Purchased Separately 

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Gyuto
Edge Length: 246mm
Edge Steel: Ginsanko (Silver 3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wa
Total Length: 401mm 
Spine Length: 256mm 
Blade Height: 48mm 
Thickness at Spine: 1.9mm 
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8
Handle Length: 145mm 
Weight: 166g
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 247mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 401mm
Spine Length:  255mm
Blade Height: 49mm
Thickness: 1.8mm
Handle Length: 145mm
Weight: 171g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya ST
Producing Area: Seki, Gifu - Japan 
Profile: Gyuto 
Edge Length: 240mm 
Edge Steel: VG-10
Steel Type: Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western Imitation Mahogany 
Total Length: 360mm
Spine Length: 247mm
Blade Height: 50mm
Thickness: 1.9mm 
Handle Length: 115mm
Weight: 227g
Saya/Guard: No

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10 
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Length: 240mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 375mm
Spine Length: 245mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 0.9mm
Handle Length: 128mm
Weight: 232g
Saya/Guard: Purchased Separately.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: ST Tsuchime Damascus Western
Profile: Sujihiki
Edge Length: 237mm
Blade Height: 39mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Damascus Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless
Total Length: 363mm
Spine Length: 241mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 122mm
Weight: 170g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら 
Made in:  Sakai-Osaka/ Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Mosuke モスケ
Line: Kikuchiyo x Mosuke
Profile: Yanagiba
Edge Length: 233mm
Blade Height: 33mm
Edge Steel: Yasuki Silver #3 (Ginsan)
Steel Type: Stainless Steel
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless 
Finish: Migaki
Bevel: Single 
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed  
Handle Shape: Octagonal 
Handle Material: Ho Wood 
Ferrule/Bolster Material: Buffalo Horn 
Spine Length: 244mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 133mm
Total Length: 378mm
Weight: 133g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Kenji Togashi 富樫
Sharpener: Kenya Togashi 憲哉
Line: Togashi Damascus
Profile: Gyuto
Edge Length: 230mm
Blade Height: 53.1mm
Edge Steel: Shirogami #1
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Damascus 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Burnt Yakusuji
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 245mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145.6mm
Total Length: 392mm
Weight: 170g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Togashi Single Bevel
Made in: Sakai, Osaka - Japan
Smith: Kenji Togashi 富樫
Sharpener: Kenya Togashi 憲哉
Profile: Yanagiba
Edge Length: 233mm
Blade Height: 32mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase, Ni-Mai
Cladding: Soft Iron
Finish: Kido (diagonal pattern)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: D-Shaped (maru shinogi)
Handle Material: Magnolia (ho wood)
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 244mm
Thickness of Spine at Handle: 4.0mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 133mm
Total Length: 378mm
Weight: 150g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Isamitsu 安倍勇光打ち刃物
Smith: Abe Isamitsu Blacksmith 安倍勇光打ち刃物
Made in: Ibaraki, Japan
Line: Super Blue Stainless Clad
Profile: Gyuto
Edge Length: 244mm
Blade Height: 54mm
Edge Steel: Super Blue
Steel Type: Carbon
Grind: Double Bevel
Construction: Awase (clad)
Cladding: Stainless
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Taihei Zebrawood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 404mm
Spine Length: 258mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 225g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Kanehide 兼秀
Made in: Seki-Gifu, Japan
Line: Bessaku
Profile: Kawahagi
Edge Length: 240mm
Blade Height: 45mm
Edge Steel: Unclassified
Steel Type: Semi Stainless
HRC: 60±1HRC 
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10:90
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Elastomer
Ferrule/Bolster Material: N/A
Spine Length: 245mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 138mm
Total Length: 376mm
Weight: 189g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Kanehide 兼秀
Made in: Seki-Gifu, Japan
Line: Bessaku
Profile: Komakiri Gyuto/Chef
Edge Length: 240mm
Blade Height: 67mm
Edge Steel: Unclassified
Steel Type: Semi Stainless
HRC: 60±1HRC 
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10:90
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 241mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 128mm
Total Length: 364mm
Weight: 263g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Miyazaki Kaijya
Line: Hineri Damascus
Made in: Goto Islands, Nagasaki - Japan
Smith: Haruo Miyazaki 宮崎 春生
Sharpener: Haruo Miyazaki 宮崎 春生
Profile: Gyuto/Chef
Edge Length: 245mm
Blade Height: 55.4mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, Warikomi
Cladding: Soft Iron Damascus 
Finish: Forced Patina
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Oval Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length:  260mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .9mm
Handle Length: 148mm
Total Length: 406mm
Weight: 245mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Morihei 森平 
Line: Hisamoto INOX
Profile: Gyuto
Edge Length: 
Edge Steel: SUS-440
Steel Type: Stainless Steel
HRC: 58-60
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 
Spine Length: 
Blade Height: 
Thickness: 
Handle Length: 
Weight: 
Final Edge: Morihei 森平

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.