HITOHIRA ひとひら (一片)
We are proud to call Hitohira ひとひら (一片) our main Japanese supplier, and for good reason. Despite being a relatively new brand in the premium Japanese knife industry, Hitohira boasts one of the most diverse, unique, and robust product lineups in the entire market. Based in Tokyo, Hitohira brings a unique focus on building trust with the craftspeople they work with. By putting the artisan’s needs first, Hitohira has been able to gain favor with the best makers all over Japan and design some of the most beautiful and rare knives we have the pleasure of handling. We are excited and humbled for our relationship and product selection to grow with Hitohira over the years.
Hitohira - TD - SLD - Nashiji - Sujihiki - 240mm - Walnut Handle
AAA-615SLN-02-GA240
Brand: Hitohira ひとひら (一片)
Made in: Sanjo, Niigata - Japan
Line: TD
Profile: Sujihiki
Edge Length: 249mm
Blade Height: 35mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Bird's Eye Maple
Spine Length: 267mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: .8mm
Handle Length: 137mm
Total Length: 404mm
Weight: 124g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care Advisement: Semi-Stainless
This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Hitohira - TD - SLD - Nashiji - Sujihiki - 270mm - Walnut Handle
AAA-615SLN-02-GA270
Brand: Hitohira ひとひら (一片)
Made in: Sanjo, Niigata - Japan
Line: TD
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 36mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Bird's Eye Maple
Spine Length: 292mm
Thickness of Spine at Handle: 5.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .7mm
Handle Length: 137mm
Total Length: 429mm
Weight: 147g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care Advisement: Semi-Stainless
This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.