Hitohira - Imojiya MZ - Tsuchime Migaki - Santoku - 165mm - Western Handle

Brand: Hitohira ひとひら (一片)
Line: Echizen 
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki, Gifu - Japan
Profile: Honesuki Kaku
Edge Length: 146mm
Blade Height: 39.2mm
Edge Steel: Undisclosed Semi-Stainless
Steel Type: Semi-Stainless
Construction: Zenko/Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Double Asymmetric (Right-Handed)
Bevel Symmetry: 10/90
Hand Orientation: Right Handed
Handle Shape: Western Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 143.6mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 120mm
Total Length: 264mm
Weight: 142g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Made in:  Seki-Gifu/ Japan
Line: FJ SG2 Mirror
Profile: Bunka
Edge Length: 179mm
Blade Height: 47mm
Edge Steel: SG2 Powder Metal
Steel Type: Stainless
Grind: Convex
Construction: Awase Clad
Cladding: Stainless
Finish: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Linen Micarta
Ferrule/Bolster Material: Stainless Steel
Total Length: 296mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 173g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line:  FJ
Made in: Seki, Gifu-Japan
Profile: Honesuki Kaku
Edge Length: 148mm
Blade Height: 39mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Zenko (Mono-steel) 
Finish: Migaki (Standard)
Bevel: Asymmetric 
Bevel Symmetry: 10/90
Hand Orientation: Right Handed
Handle Shape: Western Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 148mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: .5mm
Handle Length: 119mm
Total Length: 266mm
Weight: 159g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Line: FJ
Producing Area: Seki-Gifu/ Japan

Profile: Kiritsuke Gyuto
Edge Steel: Mono VG-10
Steel Type:  Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed
Handle: Ho Wood & Buffalo Horn Ferrule Octagonal
Total Length: 380mm
Edge Length: 224mm
Spine Length: 240mm
Blade Height: 49mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 140mm
Weight: 150g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.