HITOHIRA ひとひら (一片)
We are proud to call Hitohira ひとひら (一片) our main Japanese supplier, and for good reason. Despite being a relatively new brand in the premium Japanese knife industry, Hitohira boasts one of the most diverse, unique, and robust product lineups in the entire market. Based in Tokyo, Hitohira brings a unique focus on building trust with the craftspeople they work with. By putting the artisan’s needs first, Hitohira has been able to gain favor with the best makers all over Japan and design some of the most beautiful and rare knives we have the pleasure of handling. We are excited and humbled for our relationship and product selection to grow with Hitohira over the years.
Hitohira - AH - White #2 - Sujihiki - 270mm - Western Handle
AAA-165W-01-GA270
Brand: Hitohira ひとひら
Line: AH
Made in: Sakai, Osaka - Japan
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 39mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Zenko (Mono-Steel)
Cladding: N/A, Mono-Steel
Finish: Migaki (Standard)
Bevel: Double (Asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 277mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 128mm
Total Length: 405mm
Weight: 188g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Hitohira - KH - Stainless - Sujihiki - 270mm - Imitation Mahogany Handle
eea-020-09-ga270
Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu, Japan
Line: KH
Profile: Sujihiki
Edge Length: 268mm
Blade Height: 41mm
Edge Steel: Unclassified
Steel Type: Stainless
Hardness: 60±1HRC
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 118mm
Total Length: 389mm
Weight: 185g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Hitohira - Kikuchiyo x Mosuke - Enmon - White #1 Damascus - 270mm Kiritsuke - Taihei Ebony Handle
Brand: Hitohira ひとひら (一片)
Blacksmith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Kiritsuke
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ziricote Wa
Total Length: 430mm
Edge Length: 257mm
Spine Length: 278mm
Blade Height: 46mm
Thickness at Spine: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.6
Handle Length: 152mm
Weight: 281g
Saya/Guard: Yes, Ho Wood
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.