Anniversary Sale 2

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Santoku
Edge Length: 164mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 312mm
Spine Length: 185mm
Thickness of Spine at Handle: 2.6mm 
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 127mm
Weight: 124g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Chef Knife
Edge Length: 170mm
Blade Height: 52mm
Edge Steel: 52100
HRC: 65
Steel Type: Carbon
Cladding: N/A 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 296mm
Spine Length: 175mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 122mm
Weight: 188g
Saya/Guard: Purchased Separately

Brand: Goyon Chazeau
Made In: Thiers - France
Line: Le Thiers
Profile: Bread
Edge Length: 187mm
Steel Type: Stainless 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Buffalo Horn
Total Length: 305mm
Spine Length: 187mm
Blade Height: 22mm
Thickness: 1.8mm
Handle Length: 115mm
Weight: 123g

Includes a Wooden Box.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Soma Metalwork
Smith: Kiran Chapman
Sharpener: Kiran Chapman
Made in: North Yarmouth, ME
Profile: Honesuki Kaku
Edge Length: 159mm
Blade Height: 53mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Zenko (Mono-steel)
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right Handed
Handle Shape: Octagonal
Handle Material: Mono-Oak
Total Length: 290mm
Spine Length: 165m
Thickness of Spine at Handle: 4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 128mm
Weight: 150g
Saya/Guard:  Purchased Separately

Handmade in Maine by Soma Metalwork.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: FJ SG2 Mirror
Profile: Bunka
Edge Length: 179mm
Blade Height: 47mm
Edge Steel: SG2 Powder Metal
Steel Type: Stainless
Grind: Convex
Construction: Awase Clad
Cladding: Stainless
Finish: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Linen Micarta
Ferrule/Bolster Material: Stainless Steel
Total Length: 296mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 173g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Ginsan  銀三
Profile: Kamagata Usuba
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Single
Hand Orientation: Right Handed
Handle: Ho Wood Wa
Total Length: 314mm
Edge Length: 165mm
Spine Length: 180mm
Blade Height: 42mm
Thickness at Spine: 3.1mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 133mm
Weight: 157g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.