in stock

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Santoku
Total Length: 212mm
Internal Length: 192mm
Total Height: 61mm
Internal Height: 54mm
Total Thickness: 11mm
Internal Thickness: 3.6mm
Weight: 48g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Kiritsuke Sujihiki
Total Length: 316mm
Internal Length: 281mm
Total Height: 58mm
Internal Height: 46mm
Total Thickness: 11mm
Internal Thickness: 4mm
Weight: 58g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Kiritsuke
Total Length: 260mm
Internal Length: 240mm
Total Height: 68mm
Internal Height: 58mm
Total Thickness: 11mm
Internal Thickness: 4mm
Weight: 60g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Petty
Total Length: 160mm
Internal Length: 138mm 
Total Height: 42mm
Internal Height: 27.5mm
Total Thickness: 11mm
Internal Thickness: 3.7mm
Weight: 23g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Dimensions: 450mm x 295mm x 20mm

Weight: 691g

Material: Kiri Wood (Paulownia).

Notes: While technically a hardwood, Kiri Wood is particularly soft on knife edges. It is extremely light, resistant to decay, and has an even higher strength to weight ratio than balsa wood. Kiri Wood's lightweight makes it ideal for taking on hikes, picnics, camping, or simply as an everyday board. Due to its low density and low hardness, it is not advised to be used for heavy-duty work like butcher cleaving, sawing, or forceful impacts. Native to East Asia.

Care: Wash with warm, soapy water, only using something scrubby or abrasive when needed, otherwise use the soft-side of a sponge or simply a towel or rag. Wipe as dry as possible. Once fully dry, store flat if possible. Use food-safe oil or wax blend when the board feels dry, you do not need to constantly oil. Do not let soak. At your discretion you can use a fairly high-grit sandpaper to condition the surface to remove discoloration and maring; oil afterwards.

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Total Length: 200mm

Head Length: 60mm

Head Width: 35mm

Weight: 107g

Total Length: 175mm

Head Length: 45mm

Head Width: 25mm

Weight: 74g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Measurements are for the inside of the Saya, these measurements should be larger than your knives measurements.

Total Internal Length: 199mm

Height at Opening: 50mm

Width of Opening at Spine: 3.6mm

Width of Opening at Edge: 2.7mm

*These Measurements were taken from one sample, there might be slight variations in each one*

Length: 205mm
Width: 75mm
Height: 35mm
Weight: 63g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for an ideal cutting surface because of it's softness, it won't damage blade edges. Additionally, due to a compound called Hinokitiol, Aomori Hiba wood is naturally somewhat antimicrobial and germicidal and is very rot and mold resistant. Because of these factors Aomori Hiba wood is traditionally often reserved for building shrines and temples in Japan. It also smells amazing!

380mm x 520mm x 30mm

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

Total Length: 225mm
Handle Length: 120mm
Blade Length: 80mm
Max Opening: 105mm
Weight: 229g
Steel Type: Carbon
Hand Orientation: Right

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for an ideal cutting surface because of it's softness, it won't damage blade edges. Additionally, due to a compound called Hinokitiol, Aomori Hiba wood is naturally somewhat antimicrobial and germicidal and is very rot and mold resistant. Because of these factors Aomori Hiba wood is traditionally often reserved for building shrines and temples in Japan. It also smells amazing!

475mm x 230mm x 30mm, ~1556g

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements. The board may warp overtime, store flat.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for an ideal cutting surface because of it's softness, it won't damage blade edges. Additionally, due to a compound called Hinokitiol, Aomori Hiba wood is naturally somewhat antimicrobial and germicidal and is very rot and mold resistant. Because of these factors Aomori Hiba wood is traditionally often reserved for building shrines and temples in Japan. It also smells amazing!

Length: 377mm
Width: 205mm
Height: 28mm
Weight: 1123g

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Higonokami 肥後守
Smith: Mitsuo Nagao 永尾 光雄
Producing Area: Miki-Hyogo/ Japan
Steel Type: Carbon
Steel: Blue (Aogami) #2, Soft Iron Clad
Handle: Brass
Hand Orientation: Ambidextrous
Total Length: 206mm
Blade Length: 85mm
Blade Height: 17mm
Handle Length: 120mm
Weight: 70g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Length: 266mm

Outside Width: 70mm

Weight: 140g

***The internal width of this guard will fit knives with a blade height up to 55mm***

If you have any questions or concerns about fitting your knife with a blade guard don't hesitate to reach out to us before ordering!

Length: 257g

Outside Width: 48mm

Weight: 89g

***The internal width of this guard will fit knives with a blade height up to 36mm***

If you have any questions or concerns about fitting your knife with a blade guard don't hesitate to reach out to us before ordering!

Length: 175mm

Outside Width: 42mm

Weight: 45g

***The internal width of this guard will fit knives with a blade height up to 17mm***

If you have any questions or concerns about fitting your knife with a blade guard don't hesitate to reach out to us before ordering!

Brand: Goyon Chazeau
Line: Thiers Olive 
Profile: Bread
Edge Length: 220mm
Steel Type: Stainless 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western Olive Wood
Total Length: 360mm
Spine Length: 223mm
Blade Height: 27mm
Thickness: 2.5mm
Handle Length: 133mm
Weight: 186g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Olive
Profile: Bread
Edge Length: 202mm
Blade Height: 25mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Olive Wood
Ferrule/Bolster Material: Stainless
Total Length: 325mm
Spine Length: 202mm
Thickness of Spine at Handle: 2.8mmn
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 118mm
Weight: 140g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.