in stock

Brand: Ryusen Hamono  株式会社 龍泉刃物
Line: SOURYURIN
Made in: Echizen, Fukui - Japan
Profile: Nakiri/Vegetable
Edge Length: 150mm
Blade Height: 47mm
Edge Steel: VG10W
Steel Type: Stainless
HRC: 62±
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (Hammered), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Polyurethane resin
Ferrule/Bolster Material: Stainless Steel
Spine Length: 178mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 127mm
Total Length: 312mm
Weight: 221g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Nigara 二唐刃物鍛造所
Line: SPG STRIX
Made in: Aomori - Japan
Profile: Nakiri/Vegetable
Edge Length: 170mm
Blade Height: 49mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 170mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 131mm
Total Length: 320mm
Weight: 185mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Futana Polished
Profile: Santoku
Edge Length: 170mm
Blade Height: 47.2mm
Edge Steel: AUS-10
Steel Type: Stainless
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Polished Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Tagayasan
Ferrule/Bolster Material: Ebony
Total Length: 321mm
Spine Length: 190mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm 
Handle Length: 134mm
Weight:135g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Echizen, Fukui - Japan
Line: NM 
Profile: Nakiri
Edge Length: 167mm
Blade Height: 45mm
Edge Steel: VG1
Steel Type: Stainless
Grind: Wide Double Bevel
Construction: Awase/San-Mai
Cladding: Soft Stainless 
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Total Length: 292mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Weight: 148g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守 
Made in: Hitoyoshi-city, Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Bunka/Kiritsuke Santoku
Edge Length: 190mm
Blade Height: 53mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi, Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 337mm
Spine Length: 205mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 133mm
Weight: 216g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守 
Made in: Hitoyoshi-city, Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Santoku
Edge Length: 173mm
Blade Height: 53.5mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octogonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 320mm
Spine Length: 190mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 134mm
Weight: 196g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守 
Made in: Sakai, Osaka - Japan
Line: V5-SB
Profile: Kiritsuke Santoku
Edge Length: 190mm
Blade Height: 46mm
Edge Steel: VG5
Steel Type: Stainless
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western Black Pakka
Total Length: 325mm
Spine Length: 200mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 115mm
Weight: 181g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 288mm 
Edge Length: 160mm 
Spine Length: 170mm 
Handle Length: 117mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.5mm 
Thickness of Spine ~1cm from Tip: 1.5mm 
Weight: 187g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Ryusen 株式会社 龍泉刃物
Line: TANGANRYU
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Micarta Hybrid
Total Length: 315mm
Edge Length: 170mm
Spine Length: 171mm
Blade Height: 46mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 125mm
Weight: 203g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.