in stock

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 121mm
Blade Height: 27mm
Edge Steel: DSR-1K6 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 128mm
Thickness of Spine at Handle: 1.2mm 
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 116mm
Total Length: 243mm
Weight: 65g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 146mm 
Blade Height: 29mm 
Edge Steel: DSR-1K6 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 155mm 
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.0mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 117mm
Total Length: 275mm
Weight: 68g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 125mm 
Blade Height: 28mm 
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5HRC
Construction: Zenko (Mono-Steel)
Cladding: N/A 
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 128mm
Thickness of Spine at Handle: 1.2mm
Thickness ½ way: 0.8mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 104mm 
Total Length: 232mm 
Weight: 75g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Nakiri
Edge Length: 165mm
Blade Height: 47.5mm
Edge Steel:  DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Asymmetric Double 
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 177mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 139mm
Total Length: 320mm
Weight: 149g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Made in: Seki, Gifu - Japan 
Profile: Cake Knife
Edge Length: 303mm 
Blade Height: 41mm  
Edge Steel: AUS-8 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 313mm 
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 132mm 
Total Length: 445mm 
Weight: 240g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Morihei 森平
Line: INOX
Profile: Honesuki Kaku
Edge Length: 150mm 
Blade Height: 41mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 59±1HRC 
Construction: Zenko (Mono-Steel)
Cladding: N/A (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 152mm 
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 106mm 
Total Length: 260mm 
Weight: 179g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Bunka
Edge Length: 178mm
Blade Height: 46.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 20/80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 185mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .3mm
Handle Length: 140mm
Total Length: 325mm
Weight: 121g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Line: Togashi
Made in: Sakai-Osaka/ Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi 憲哉
Profile: Yanagiba 
Edge Length: 232mm
Blade Height: 32mm 
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0:100
Hand Orientation: Right-handed
Handle Shape: Octagonal 
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 245mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 134mm 
Total Length: 377mm
Weight: 145g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: Hiragana
Profile: Yanagiba
Edge Length: 227mm
Blade Height: 35mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 236mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 115mm
Total Length: 354mm
Weight: 179g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: SK
Profile: Butchery
Edge Length: 150mm
Blade Height: 29mm
Edge Steel: SK
Steel Type: Carbon
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10:90
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 156mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 107mm
Total Length: 262mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Kanehide 兼秀
Made in: Seki-Gifu, Japan
Line: Bessaku
Profile: Kawahagi
Edge Length: 240mm
Blade Height: 45mm
Edge Steel: Unclassified
Steel Type: Semi Stainless
HRC: 60±1HRC 
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10:90
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Elastomer
Ferrule/Bolster Material: N/A
Spine Length: 245mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 138mm
Total Length: 376mm
Weight: 189g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu, Japan
Line: KH
Profile: Sujihiki
Edge Length: 268mm 
Blade Height: 41mm
Edge Steel: Unclassified
Steel Type: Stainless 
Hardness: 60±1HRC 
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed  
Handle Shape: Western (Yo)
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 118mm
Total Length: 389mm
Weight: 185g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ
Made in: Seki, Gifu - Japan 
Profile: Gyuto
Edge Length: 230mm
Blade Height: 50mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double (Asymmetric) 
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed (Asymmetric) 
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 245mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .6mm
Handle Length: 140mm
Total Length: 384mm
Weight: 150mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki-Gifu, Japan
Line: FJ
Profile: Petty/Utility
Edge Length: 154mm
Blade Height: 30mm
Edge Steel: VG-10 
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length:.163mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6
Thickness ~1cm from Tip: 0.9mm
Handle Length: 124mm
Total Length: 287mm
Weight: 61g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら (一片)
Line: KH MV
Made in: Seki, Gifu - Japan 
Profile: Yo Deba
Edge Length: 183mm
Blade Height: 48mm 
Edge Steel: Molybdenum Vanadium 
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 117mm 
Total Length: 305mm 
Weight: 235g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Sakai-Osaka/ Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi  憲哉
Line: Togashi Blue #1 Mizu Honyaki
Profile: Yanagiba 
Edge Length: 290mm
Blade Height: 41mm
Edge Steel: Honyaki Yasuki Blue (Aogami) #1 
Steel Type: Carbon
Construction: Honyaki (differentially hardened)
Cladding: N/A
Finish: Forced Patina
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Taihei Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 304mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 146mm
Total Length: 450mm
Weight: 242g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi 富樫
Sharpener: Kenya Togashi
Profile: Yanagiba
Edge Length: 318mm
Blade Height: 37mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Mizu Honyaki (Differentially Hardened)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Taihei Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 335mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 2.0mm
Handle Length: 152mm
Total Length: 482mm
Weight: 285g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in:  Sakai-Osaka/ Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Mosuke モスケ
Line: Kikuchiyo x Mosuke
Profile: Yanagiba
Edge Length: 233mm
Blade Height: 33mm
Edge Steel: Yasuki Silver #3 (Ginsan)
Steel Type: Stainless Steel
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless 
Finish: Migaki
Bevel: Single 
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed  
Handle Shape: Octagonal 
Handle Material: Ho Wood 
Ferrule/Bolster Material: Buffalo Horn 
Spine Length: 244mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 133mm
Total Length: 378mm
Weight: 133g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Made in:  Seki-Gifu/ Japan
Line: FJ VG10
Profile: Kiritsuke Petty
Edge Length: 146mm
Blade Height: 30mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Convex
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Black Buffalo Horn
Total Length: 275mm
Spine Length: 155mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 121mm
Weight: 55g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.