in stock

Brand: Hitohira ひとひら (一片)
Line: Futana
Made in: Tosa, Kochi - Japan 
Profile: Nakiri/Vegetable
Edge Length: 165mm
Blade Height: 50mm
Edge Steel: Alleima 19C27
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 184mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 135mm
Total Length: 317mm
Weight: 148g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Futana
Made in: Tosa, Kochi - Japan 
Profile: Santoku/Home Chef
Edge Length: 168mm
Blade Height: 48mm 
Edge Steel: Alleima 19C27
Steel Type: Stainless
HRC: 60±1
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 183mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 135mm 
Total Length: 319mm 
Weight: 122g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: HG
Made in: Seki, Gifu - Japan 
Profile: Nakiri/Vegetable
Edge Length: 160mm
Blade Height: 44mm
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 177mm
Thickness of Spine at Handle: 1.1mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 135mm
Total Length: 310mm
Weight: 121g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: HG Damascus
Made in: Seki, Gifu - Japan 
Profile: Gyuto/Chef
Edge Length: 218mm 
Blade Height: 46mm 
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 224mm 
Thickness of Spine at Handle: 
Thickness ½ way: 
Thickness ~1cm from Tip: 
Handle Length: 146mm 
Total Length: 370mm
Weight: 128g 
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Makoto Kurosaki 
Line: VG7 Damascus 
Made in: Echizen, Fukui - Japan 
Sharpener: Makoto Kurosaki
Profile: Petty/Utility
Edge Length: 130mm 
Blade Height: 29mm 
Edge Steel: VG7
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 143mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 114mm 
Total Length: 258mm 
Weight: 85g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Futana
Made in: Tosa, Kochi - Japan 
Profile: Gyuto/Chef
Edge Length: 217mm 
Blade Height: 46mm 
Edge Steel: Alleima 19C27
Steel Type: Stainless
HRC: 60±1
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 230mm 
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 145mm
Total Length: 376mm
Weight: 142g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH 
Made in: Seki, Gifu - Japan 
Profile: Sujihiki/Slicer
Edge Length: 226mm 
Blade Height: 38mm 
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length:  248mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 140mm 
Total Length: 386mm
Weight: 150g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: HG
Profile: Gyuto/Chef
Edge Length: 246mm
Blade Height: 50mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 255mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 145mm
Total Length: 402mm
Weight: 139g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 185mm
Blade Height: 45.4mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Spine Length: 195mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .9mm
Handle Length: 135mm
Total Length: 330mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Blacksmith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Kiritsuke
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ziricote Wa
Total Length: 430mm
Edge Length: 257mm
Spine Length: 278mm
Blade Height: 46mm
Thickness at Spine: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.6
Handle Length: 152mm
Weight: 281g
Saya/Guard: Yes, Ho Wood

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 288mm 
Edge Length: 160mm 
Spine Length: 170mm 
Handle Length: 117mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.5mm 
Thickness of Spine ~1cm from Tip: 1.5mm 
Weight: 187g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya TH Damascus
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50 
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious 
Total Length: 368mm
Edge Length: 205mm
Spine Length: 224mm
Blade Height: 45mm
Handle Length: 140mm
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.3mm
Thickness of Spine ~1cm from Tip: 0.8mm
Weight: 158g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Nickel Damascus
Made In:  Tosa, Kochi - Japan 
Profile: Santoku
Edge Length: 170mm
Blade Height: 48mm
Edge Steel: AUS-10
Steel Type: Stainless
Cladding: Nickle Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Tagayasan Wa
Total Length: 315mm
Spine Length: 182mm
Thickness of Spine at Handle: 1.7mm 
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 135mm
Weight: 131g
Saya/Guard: Purchased Separately 

Brand: Hitohira ひとひら (一片) 
Line: Imojiya TH Damascus
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50 
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious 
Total Length: 364mm
Edge Length: 206mm
Spine Length: 223mm
Blade Height: 46mm
Handle Length: 140mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 0.6mm
Weight: 160g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 292mm 
Edge Length: 160mm 
Spine Length: 170mm 
Handle Length: 117mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.2mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 1mm 
Weight: 158g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Petty
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 245mm 
Edge Length: 135mm 
Spine Length: 135mm 
Handle Length: 104mm 
Blade Height: 28mm 
Thickness of Spine at Handle: 1.6mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 0.5mm 
Weight: 76g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.