$200-$299

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Petty/Utility
Edge Length: 123mm
Blade Height: 33mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 136mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 119 mm
Total Length: 250mm 
Weight: 112g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Petty
Edge Length: 127mm 
Blade Height: 36mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 140mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 113mm
Total Length: 252mm
Weight: 115g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Tosa-Kochi/ Japan
Line: Blue #1
Profile: Santoku
Edge Length: 165mm
Blade Height: 46mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 178mm
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 128mm
Total Length: 305mm
Weight: 150g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 247mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 401mm
Spine Length:  255mm
Blade Height: 49mm
Thickness: 1.8mm
Handle Length: 145mm
Weight: 171g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Echizen, Fukui - Japan
Profile: Shakekiri
Edge Length: 241mm
Blade Height: 68mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic Ferrule
Spine Length: 255mm
Thickness of Spine at Handle: 5.2mm
Thickness ½ way: 5.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 143mm
Total Length: 396mm
Weight: 288g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics. 

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Profile: Shakekiri
Edge Length: 272mm
Blade Height: 78mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic
Spine Length: 291mm
Thickness of Spine at Handle: 6.1mm
Thickness ½ way: 4.6mm
Thickness ~1cm from Tip: 1.9mm
Handle Length: 152mm
Total Length: 441mm
Weight: 437g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made in: Sakai, Osaka - Japan
Line: Kikuzuki Kuro
Profile: Santoku
Edge Length: 167mm
Blade Height: 46mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn
Total Length: 315mm
Spine Length: 185mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 0.9mm 
Handle Length: 128mm
Weight: 154g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made in: Sakai, Osaka - Japan
Line: Kikuzuki Kuro
Profile: Gyuto
Edge Length: 198mm
Blade Height: 46.5mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn
Total Length: 343mm 
Spine Length: 216mm
Thickness of Spine at Handle: 3mm 
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.8mm 
Handle Length: 127mm
Weight: 140g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Made in: Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Gyuto
Edge Length: 216mm
Blade Height: 58.3mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 363mm
Spine Length: 230mm
Thickness of Spine at Handle: 4.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 134mm
Weight: 245g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.