$100-$199

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in  the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for and ideal cutting surface because it has the perfect firmness level, so it won't damage blade edges. Due to a compound called Hinokitiol, Aomori Hiba wood is also naturally full of antimicrobial and germicidal properties and is super duper rot and mold resistant. Because of these resilient properties Aomori Hiba wood is often reserved for building shrines and temples in Japan. Plus it smells amazing!

475mm x 230mm x 30mm, ~1556g

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements. The board may warp overtime, store flat.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Petty
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 245mm 
Edge Length: 135mm 
Spine Length: 135mm 
Handle Length: 104mm 
Blade Height: 28mm 
Thickness of Spine at Handle: 1.6mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 0.5mm 
Weight: 76g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Hiragana WS
Profile: Gyuto
Edge Length: 216mm
Blade Height: 45.5mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (mono-steel)
Finish: Migaki (Standard)
Bevel: Double (asymmetrical)  
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Octagonal Pakka
Total Length: 350mm
Spine Length: 225mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 125mm
Weight: 125g
Saya/Guard: Purchased Separately 

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Olive
Profile: Bread
Edge Length: 202mm
Blade Height: 25mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Olive Wood
Ferrule/Bolster Material: Stainless
Total Length: 325mm
Spine Length: 202mm
Thickness of Spine at Handle: 2.8mmn
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 118mm
Weight: 140g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - 1834
Profile: Fillet
Edge Length: 200mm
Blade Height: 25mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 313mm
Spine Length: 198mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 0.8mm
Thickness ~1cm from Tip: 0.7mmn
Handle Length: 107mm
Weight: 116g
Saya/Guard: Leather Sheath

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand:  K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Pointed Butcher
Edge Length: 285mm
Blade Height: 55mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 440mm
Spine Length: 283mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 0.6mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 157mm
Weight: 232g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Butcher
Edge Length: 
Blade Height: 
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 450mm
Spine Length: 300mm
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 3.9mm
Thickness ~1cm from Tip: 3.4mm
Handle Length: 150mm
Weight: 290g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Butcher
Edge Length: 
Blade Height: 
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 503mm
Spine Length: 355mm
Thickness of Spine at Handle: 4.0mm
Thickness ½ way: 3.9mm
Thickness ~1cm from Tip: 3.0mm
Handle Length: 150mm
Weight: 350g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Mark Thomas
Line: Double Bend
Glass Type: Mouth blown & Lead Free
Total Height: 214mm
Top Width: 62mm
Diameter: 85mm
Glass Thickness: 1.5mm
Capacity: 1200 ml | 40 oz
Weight: 255g

Dishwasher safe

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel: S45C
Steel Type: Mono (Zenko) Carbon 
HRC: 55-56
Handle: Oak
Total Length: 244mm
Blade Length: 78mm
Thickness at Poll: 24mm
Weight: 631g

Includes a Leather Sheath with snap & Strap.

Brand: Morihei 森平
Size: #6
Weight: 272g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Line: Hisamoto INOX
Profile: Petty
Edge Length: 120mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 58-60 
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed 
Handle: Pakka Western
Total Length: 230mm
Spine Lengh 130mm
Blade Height: 27mm
Thickness: 1.5mm
Handle Length: 100mm
Weight: 72g
Final Edge: Morihei 森平

CARE ADVISEMENTS: This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Morihei 森平
Line: Hisamoto INOX
Profile: Petty/Utility
Edge Length: 150mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 58-60 
Cladding: N/A (Mono-Steel)
Bevel: Double (Asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle: Western (Pakka)
Total Length: 255mm
Spine Lengh 160mm
Blade Height: 28mm
Thickness: 1.6mm
Handle Length: 104mm
Weight: 81g
Saya/Guard: Sold Separately 

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.