Anniversary Sale 2

Brand: Morihei 森平
Size: 50 x 60mm
Weight: 53g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Line: Hisamoto INOX
Profile: Petty
Edge Length: 120mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 58-60 
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed 
Handle: Pakka Western
Total Length: 230mm
Spine Lengh 130mm
Blade Height: 27mm
Thickness: 1.5mm
Handle Length: 100mm
Weight: 72g
Final Edge: Morihei 森平

CARE ADVISEMENTS: This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: HI-CONDITION ハイコンディション
Producing Area: Tokyo/ Japan
Size: 10"L x 2"W x 1"D
Weight: 350g

Really high quality, bare hard felt strop on a firm base so it has no give.

Felt strops will be slightly more efficient at cleaning up edges post sharpening/maintaining than leather, and you could certainly finish off of them. Ideal for softer western knives, butcher knives, and other higher-volume knives.

Use only an edge-trailing/draw stroke. Can be loaded with micron abrasive pastes or sprays. Clean periodically with a slightly damp rag, allow to dry before using.

Brand: Gestura
Made In: Japan
Profile: Plating/Utility Spoon
Steel Type: 18/10 stainless steel
Hand Orientation: Ambidextrous
Total Length: 235mm
Bowl Length: 80mm
Bowl Width: 48mm
Bowl Depth: 10mm
Volume: 1 Table Spoon (1/2 oz)
Handle Length: 155mm
Weight: 55g

A custom utility spoon stamped and finished by hand, designed for control and consistency.

The well is formed deep to cradle liquid - one tablespoon exactly, to help with recipe continuity and reduce the amount of tools needed on hand - and pointed at the tip for precise pouring or basting. The handle is long enough to stir a braise or a pot of beans, and nimble enough to sauce a plate or scrape the corners of a rondeau or quart container. Inspired by the worn and tarnished steel often found at flea markets, and modeled after old American and European silhouettes the spoon is tumbled and unpolished. This creates a matte and imperfect material finish, unique to each piece.  

Packaging is constructed with recycled chipboard.

From Smithey: Handcrafted and branded with the Smithey logo over high-grade oil-tanned leather, this skillet sleeve is one of our favorite tools. Available in two sizes, the standard-fit slides perfectly over the handle of the No. 10 and No. 12 while the extended fit is designed to give more protection on our No. 8 Chef Skillet handle. Like cast iron, these sleeves get better with time and use.

• Standard: 4.5” x 2” (Fits 10" & 12" Traditional Skillets)
• Extended: 6” x 2” (Fits 8” & 10” Chef Skillets + 12" Flat Top)
• Oil-Tanned Leather, Double-Layered
• Kevlar Heat Resistant Thread

Brand: ANEX 兼古製作所
Made In: Constructed in Pakistan, finished in Sanjo, Japan
Material: Stainless Steel
Length: 140mm
Weight: 22g

This Senbudō's (仙武堂) Yakiniku tongs can stand by it self so it's hygienic and good for picking meat and vegetable at outside BBQ.

Brand: Todai
Made in: Sanjo Japan
Total Length: 198mm
Maximum Opening Distance: 100mm
Weight: 44g

Brand: Morihei
Hand Orientation:  Right
Steel Type:  
Edge Length:  35mmn
Total Length:  105mm
Handle Length:  70mm
Blade Thickness:   2.5mm
Weight:  23g

Brand: Hitohira ひとひら (一片)
Line: TH Stainless
Profile: Paring
Edge Length: 77mm
Blade Height: 20mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Mono
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Total Length: 190mm
Spine Length: 80mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm 
Handle Length: 105mm
Weight: 58g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Yukiwa

Made In: Japan

Material: Stainless Steel

Total Length: 237mm

Weight: 30g

Total Length: 105mm
Length of Contacting Points: 14mm
Weight: 23g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Hiragana
Profile: Bread
Edge Length: 250mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless 
Bevel: Serrated 
Hand Orientation: Ambidextrous
Handle: Black Plastic Western
Total Length:  384mm
Spine Length: 250mm
Blade Height: 29mm
Thickness: 1.5mm
Handle Length: 133mm
Weight: 144g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Olive
Profile: Bread
Edge Length: 202mm
Blade Height: 25mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Olive Wood
Ferrule/Bolster Material: Stainless
Total Length: 325mm
Spine Length: 202mm
Thickness of Spine at Handle: 2.8mmn
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 118mm
Weight: 140g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.