Anniversary Sale 2

Goyon-Chazeau - Le P'tit Tradi - 100mm Utility - Ebony Western Handle

TRADIPT130PGR

€52,95

Brand: Goyon-Chazeau
Made in: Thiers - France
Line: P'tit tradi
Profile: Utility
Edge Length: 98mm
Blade Height: 22mm
Edge Steel: 14C28N
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Ebony w/ Sapwood
Ferrule/Bolster Material: N/A
Total Length: 200mm
Spine Length: 98mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 102mm
Weight: 50g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Goyon-Chazeau - Le P'tit Tradi - 100mm Utility - Ebony Western Handle

Sakai Kikumori - Nihonko - Carbon - 120mm Petty - Western Handle

N-112

€65,95

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Nihonko 日本鋼
Profile: Petty/Utility
Edge Length: 125mm
Blade Height: 27mm
Edge Steel: SK
Steel Type: Carbon
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Polywood
Ferrule/Bolster Material: Carbon Steel
Spine Length: 130mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 98mm
Total Length: 230mm
Weight: 70g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Sakai Kikumori - Nihonko - Carbon - 120mm Petty - Western Handle

K Sabatier - Auvergne - Stainless - 6" Chef Knife - Western Handle

AUV-2102

€82,95

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Chef
Edge Length: 159mm
Blade Height: 44mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 283mm
Spine Length: 157mm
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 118mm
Weight: 177g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - Stainless - 6" Chef Knife - Western Handle

K Sabatier - Auvergne - Stainless - 5 1/2" Boning Knife - Western Handle

AUV-2208

€78,95

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Boning
Edge Length: 151mm
Blade Height: 24mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 265mm
Spine Length: 149mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.0mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 109mm
Weight: 108g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - Stainless - 5 1/2" Boning Knife - Western Handle

K Sabatier - Auvergne - Stainless - 5" Tomato Knife - Western Handle

AUV-2201

€65,95

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Tomato Knife
Edge Length: 121mm
Blade Height: 21mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 228mm
Spine Length: 123mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 101mm
Weight: 85g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - Stainless - 5" Tomato Knife - Western Handle

K Sabatier - Auvergne - Stainless - 8" Fillet - Western Handle

AUV-2501

€95,95

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Fillet
Edge Length: 203mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 325mm
Spine Length: 204mm
Thickness of Spine at Handle: 0.8mm
Thickness ½ way: 0.2mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 116mm
Weight: 134g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - Stainless - 8" Fillet - Western Handle

K Sabatier - Auvergne - Stainless - 8" Slicer - Western Handle

AUV-2401

€82,95

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Slicer
Edge Length: 204mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 328mm
Spine Length: 205mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 117mm
Weight: 165g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - Stainless - 8" Slicer - Western Handle

Kanehide - Bessaku - Stainless - Left-Handed - Honesuki Kaku - 150mm - Blue Elastomer Handle

BAA-015-52-LHA150

€56,95

Brand: Kanehide 兼秀
Made in: Seki, Gifu - Japan
Line: Bessaku
Profile: Honesuki Kaku
Edge Length: 149mm
Blade Height: 38mm
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 90/10
Hand Orientation: Right Handed
Handle Shape: Western
Handle Material: Elastomer
Ferrule/Bolster Material: N/A
Spine Length: 149mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 117mm
Total Length: 263mm
Weight: 109g
Saya/Guard: Sold separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisement: Stainless Steel
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Kanehide - Bessaku - Stainless - Left-Handed - Honesuki Kaku - 150mm - Blue Elastomer Handle

Hitohira - Hiragana - Deba - 180mm - Pakka Handle - No Bolster

AAA-279-01-NA189

€69,95

Brand: Hitohira ひとひら
Line: Hiragana
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 182mm
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 188mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm
Total Length: 306mm
Weight: 297g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Hitohira - Hiragana - Deba - 180mm - Pakka Handle - No Bolster

Windmühlenmesser - Buckel (Table/Utility Knife) - Fehrekampf - Stainless - 115mm - Walnut Handle

9219,2020,18

€78,95

Brand: Windmühlenmesser
Line: Buckel Fehrekampf
Made In: Solingen - Germany
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Steel: Proprietary Stainless
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle: Walnut
Total Length: 220mm
Spine Length: 115mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 48g
Saya/Guard: Comes with leather sheath and gift box

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Windmühlenmesser - Buckel (Table/Utility Knife) - Fehrekampf - Stainless - 115mm - Walnut Handle

Windmühlenmesser - Buckel (Table/Utility Knife) - Stainless - 115mm - Walnut Handle

2002,450,18

€52,95

Brand: Windmühlenmesser
Line: Buckel
Made In: Solingen - Germany
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Steel: Proprietary Stainless
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle: Walnut
Total Length: 220mm
Spine Length: 115mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 38g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.