Single Bevel

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: Hiragana
Profile: Yanagiba
Edge Length: 227mm
Blade Height: 35mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 236mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 115mm
Total Length: 354mm
Weight: 179g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 183mm
Blade Height: 49mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Pakka
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.5mm
Handle Length: 117mm
Total Length: 302mm
Weight: 222g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 184mm
Blade Height: 48mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 183mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 115mm
Total Length: 302mm
Weight: 238g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in:  Sakai-Osaka/ Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Mosuke モスケ
Line: Kikuchiyo x Mosuke
Profile: Yanagiba
Edge Length: 233mm
Blade Height: 33mm
Edge Steel: Yasuki Silver #3 (Ginsan)
Steel Type: Stainless Steel
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless 
Finish: Migaki
Bevel: Single 
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed  
Handle Shape: Octagonal 
Handle Material: Ho Wood 
Ferrule/Bolster Material: Buffalo Horn 
Spine Length: 244mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 133mm
Total Length: 378mm
Weight: 133g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Profile: Deba
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single
Hand Orientation: Right Handed
Handle: Ho Wood
Total Length: 370mm
Edge Length: 215mm
Spine Length: 232mm
Blade Height: 61mm
Thickness at Spine: 8.1mm
Thickness ½ way: 7.2mm
Thickness ~1cm from Tip: 5.1mm
Handle Length: 140mm
Weight: 486g
Saya: Ho Wood

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Black Smith: Kikuchiyo 菊千代
Sharpener: Manzo 万造
Profile: Yanagiba
Edge Steel: Blue #2 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ho Wood Wa
Total Length: 423mm
Edge Length: 264mm
Spine Length: 279mm
Blade Height: 33mm
Thickness at Spine: 4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 145mm
Weight: 188g
Saya/Guard: Yes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Manzo 万造
Profile: Yanagiba
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Poplar Wa
Total Length: 490mm
Edge Length: 322mm
Spine Length: 337mm
Blade Height: 38mm
Thickness at Spine: 4.7mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 151mm
Weight: 264g
Saya/Guard: Yes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Line: Kikuchiyo x Manzo
Made in: Sakai,Osaka - Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Manzō 万造
Profile: Yanagiba
Edge Length: 288mm 
Blade Height: 37mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kido (diagonal pattern)
Bevel: Single Bevel
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 303mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 142mm
Total Length: 452mm
Weight: 224g  
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Blacksmith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Kiritsuke
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ziricote Wa
Total Length: 430mm
Edge Length: 257mm
Spine Length: 278mm
Blade Height: 46mm
Thickness at Spine: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.6
Handle Length: 152mm
Weight: 281g
Saya/Guard: Yes, Ho Wood

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Rikichi 利吉
Made in: Sakai, Osaka, Japan
Line: Silver #3 
Profile: Yanagiba
Edge Length: 262mm
Blade Height: 36mm
Edge Steel: Silver #3 (Ginsanko)
Steel Type: Stainless
Grind: Single Bevel
Construction: Ni-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle Shape: Octagonal 
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 415mm
Spine Length: 275mm
Thickness of Spine at Handle: 3.8mm 
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 137mm
Weight: 170g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Echizen, Fukui - Japan
Profile: Shakekiri
Edge Length: 241mm
Blade Height: 68mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic Ferrule
Spine Length: 255mm
Thickness of Spine at Handle: 5.2mm
Thickness ½ way: 5.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 143mm
Total Length: 396mm
Weight: 288g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics. 

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Profile: Shakekiri
Edge Length: 272mm
Blade Height: 78mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic
Spine Length: 291mm
Thickness of Spine at Handle: 6.1mm
Thickness ½ way: 4.6mm
Thickness ~1cm from Tip: 1.9mm
Handle Length: 152mm
Total Length: 441mm
Weight: 437g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Tosa-Kochi, Japan
Profile: Deba 
Edge Length: 166mm
Blade Height: 50mm
Edge Steel: Ginsan (Silver #3)
Steel Type: Stainless
Construction: Awase (Clad), Ni Mai
Cladding: Soft Stainless
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 182mm
Thickness of Spine at Handle: 7.3mm
Thickness ½ way: 5.4mm
Thickness ~1cm from Tip: 3.2mm
Handle Length: 128mm
Total Length: 310mm
Weight: 267g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Tanaka
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Sharpener: 
Profile: Yanagiba
Edge Length: 268mm
Blade Height: 33mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 274mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 140mm
Total Length: 411mm
Weight: 193g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.