Single Bevel

Brand: Hitohira ひとひら 
Made in: Sakai-Osaka/ Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi  憲哉
Line: Togashi Blue #1 Mizu Honyaki
Profile: Yanagiba 
Edge Length: 290mm
Blade Height: 41mm
Edge Steel: Honyaki Yasuki Blue (Aogami) #1 
Steel Type: Carbon
Construction: Honyaki (differentially hardened)
Cladding: N/A
Finish: Forced Patina
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Taihei Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 304mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 146mm
Total Length: 450mm
Weight: 242g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Nigara Hamono  二唐刃物鍛造所
Smith: Yoshizawa Gou 吉澤 剛
Sharpener: Yoshizawa Shu 吉澤 州
Made in: Hirosaki, Aomori - Japan
Line: Blue #2 Damascus
Profile: Sakimaru Yanagiba
Edge Length: 300mm
Blade Height: 42mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Forced Patina Damascus
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal Wa
Handle Material: Karin Burl Wood, Nickel Silver Spacers 
Ferrule/Bolster Material: Blonde Buffalo Horn Ferrule and Pommel
Total Length: 456mm
Spine Length: 312mm
Thickness of Spine at Handle: 5.3mm
Thickness ½ way: 3.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 143mm
Weight: 345g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Nigara Hamono  二唐刃物鍛造所
Made in: Hirosaki, Aomori - Japan
Smith: Yoshizawa Tsuyoshi 吉澤 剛
Line: Mt. Fuji Honyaki
Profile: Kiritsuke Yanagiba
Edge Length: 288mm
Blade Height: 41.3mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Honyaki (differentially hardened), Mt. Fuji Hamon
Cladding: N/A
Finish: Forced Patina, Mt. Fuji Hamono
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 400mm (including tang)
Spine Length: 300mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: N/A
Weight: 200g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.