in stock

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding Knife
Blade Profile: Drop point
Grind: Flat Grind
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Locking Mechanism: Back Lock
Handle/Scale Material: Grilon
Handle/Scale Color: Grayish Blue
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm 
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: N/A
Lanyard Hole: yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: Hiragana
Profile: Yanagiba
Edge Length: 227mm
Blade Height: 35mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 236mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 115mm
Total Length: 354mm
Weight: 179g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: SK
Profile: Butchery
Edge Length: 150mm
Blade Height: 29mm
Edge Steel: SK
Steel Type: Carbon
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10:90
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 156mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 107mm
Total Length: 262mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira
Made in: Seki, Gifu - Japan
Profile: Honesuki
Steel: Undisclosed Semi-stainless
Steel Type: Semi-stainless
Edge Length: 153mm
Blade Height: 39mm
Construction: Mono
Bevel: Asymmetrical
Hand Orientation: Right
Handle Shape: Rectangular 
Handle Material: Elastomer
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .4mm
Handle Length: 115mm
Total Length: 268mm
Weight: 116g
Saya/Guard: No

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding knife
Blade Profile: Drop point
Grind: Flat Ground
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Handle/Scale Material: Grilon
Handle/Scale Color: Sand Beige
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: None 
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Tsubo Yoshikane 津保吉金
Made in: Seki, Gifu - Japan
Line: Bread
Profile: Bread
Edge Length: 205mm
Blade Height: 41mm
Edge Steel: Undisclosed Stainless
Steel Type: Stainless
Construction: Zenko/Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed Asymmetric
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Total Length: 325mm
Spine Length: 215mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 112.5mm
Weight: 138g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding Knife
Blade Profile: Drop point
Grind: Flat Grind
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Locking Mechanism: Back Lock  
Handle/Scale Material: Grilon
Handle/Scale Color: Olive Green
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm 
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: N/A
Lanyard Hole: yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding knife
Blade Profile: Drop point
Grind: Flat Ground
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Handle/Scale Material: Grilon
Handle/Scale Color: Mustard Yellow
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: None 
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI
Made In: Seki, Gifu - Japan
Style: Folding Knife
Blade Profile: Drop point
Grind: Flat Grind
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 55mm
Blade Height: 8mm
Blade Thickness: 2.2mm
Blade Construction: Zenko (mono-steel)
Locking Mechanism: Back Lock
Handle/Scale Material: Grilon
Handle/Scale Color: Cocoa Brown
Blade Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 90mm
Total Length Open: 152mm
Total Length Closed: 92mm 
Total Thickness: 12.5mm
Weight: 37g
Sheath/Clip: N/A
Lanyard Hole: yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Nagura

Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate or after extended periods of sharpening to remove particulate.

Brand: NSK Kogyo Ltd.
Length: 40mm
Width:18mm
Height:15mm
Weight: 18g
Grit Range: #12000

Nagura

Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate.

Brand: NSK Kogyo Ltd.
Length: 40mm
Width: 18mm
Height:15mm
Weight: 18g
Grit Range: #3000

Nagura

Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate.

Brand: NSK Kogyo Ltd.
Length: 40mm
Width:18mm
Height:15mm
Weight: 18g
Grit Range: #800

Nagura

Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate.

Brand: NSK
Length: 40mm
Width: 18mm
Height: 15mm
Weight: 18g
Grit Range: #400

Brand: HI-CONDITION ハイコンディション
Producing Area: Tokyo/ Japan
Size: 10"L x 2"W x 1"D
Weight: 350g

Really high quality, bare hard felt strop on a firm base so it has no give.

Felt strops will be slightly more efficient at cleaning up edges post sharpening/maintaining than leather, and you could certainly finish off of them. Ideal for softer western knives, butcher knives, and other higher-volume knives.

Use only an edge-trailing/draw stroke. Can be loaded with micron abrasive pastes or sprays. Clean periodically with a slightly damp rag, allow to dry before using.