$500-$999

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Made in: Sakai, Osaka - Japan
Line: Blue #1 Kikko
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 36mm
Edge Steel: Blue #1
Steel Type: Carbon
Construction: Awase/Clad, Nimai
Cladding: Soft Iron 
Finish: Damascus
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle Shape: Octagonal Wa
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 448mm
Spine Length: 303mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 145mm
Weight: 235g
Saya/Guard: Included

 

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Black Smith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Yanagiba
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Gold & Black Lacquered Handle 
Total Length: 455mm
Edge Length: 290mm
Spine Length: 307mm
Blade Height: 35mm
Thickness at Spine: 3.8mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1.2
Handle Length: 147mm
Weight: 203g
Saya/Guard: Sold Separately

Disclaimer: Single Bevel Knives are sold "Factory Sharp". Sharpening requests are subject to wait times. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  Hitohira ひとひら
Made in:  Sakai, Osaka - Japan
Smith:  Tanaka Uchihamono 田中打刃物
Sharpener:  Mosuke モスケ
Line:  Tanaka x Mosuke
Profile:  Kiritsuke Yanagiba
Edge Length:  291mm
Blade Height:  36mm
Edge Steel:  Aogami #1/Blue #1
Steel Type:  Carbon
Construction:  Awase, San-Mai
Cladding:  Soft Iron
Finish:  Migaki (standard)
Bevel:  Single
Bevel Symmetry:  0/100
Hand Orientation:  Right-Handed
Handle Shape:  Oval Octagonal
Handle Material:  Magnolia Wood
Ferrule/Bolster Material:  Buffalo Horn
Total Length:  448mm
Spine Length:  305mm
Thickness of Spine at Handle:  4.0mm
Thickness ½ way:  3.1mm
Thickness ~1cm from Tip:  2.4mm
Handle Length:  143mm
Weight:  207g
Saya/Guard:  Saya

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  Hitohira ひとひら
Made in:  Sakai, Osaka - Japan
Smith:  Tanaka Uchihamono 田中打刃物
Sharpener:  Mosuke モスケ
Line:  Tanaka x Mosuke
Profile:  Yanagiba
Edge Length:  292mm
Blade Height:  36mm
Edge Steel:  Aogami #1/Blue #1
Steel Type:  Carbon
Construction:  Awase, Ni-Mai
Cladding:  Soft Iron
Finish:  Mirror Polish (kyomen)
Bevel:  Single
Bevel Symmetry:  0/100
Hand Orientation:  Right-Handed
Handle Shape:  Oval Octagonal
Handle Material:  Ebony
Ferrule/Bolster Material:  Buffalo Horn
Total Length:  449mm
Spine Length:  306mm
Thickness of Spine at Handle:  3.7mm
Thickness ½ way:  3.2mm
Thickness ~1cm from Tip:  1.3mm
Handle Length:  144mm
Weight:  231g
Saya/Guard:  Saya

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi
Profile: Gyuto
Edge Length: 200mm
Blade Height: 52.7mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Stainless Clad 
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Ziricote 
Ferrule/Bolster Material: Buffalo Horn
Total Length: 360mm
Spine Length: 215mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 146mm
Weight: 174g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon edge and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Isamitsu 安倍勇光打ち刃物
Smith: Abe Isamitsu Blacksmith 安倍勇光打ち刃物
Made in: Ibaraki, Japan
Line: Super Blue Stainless Clad
Profile: Gyuto
Edge Length: 244mm
Blade Height: 54mm
Edge Steel: Super Blue
Steel Type: Carbon
Grind: Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Taihei Rosewood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 404mm
Spine Length: 258mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 225g
Saya/Guard: Purchased Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Merion Forge
Smith: Dominik Filip
Sharpener: Dominik Filip
Made in: Dolní Lutyně - Czech Republic
Profile: Gyuto
Edge Length: 216mm
Blade Height: 56.2mm
Edge Steel: 1.2562 W
HRC: 63-64
Steel Type: Carbon
Grind: Convex
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Coracao de Negro
Ferrule/Bolster Material: Black Horn
Total Length: 362mm
Spine Length: 233mm
Thickness of Spine at Handle: 4.6mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 130mm
Weight: 232g
Saya/Guard: Sold Seperately 

Brand: Merion Forge
Smith: Dominik Filip
Sharpener: Dominik Filip
Made in: Dolní Lutyně - Czech Republic
Profile: Gyuto
Edge Length: 185mm
Blade Height: 50.2mm
Edge Steel: 1.2562 W
HRC: 63-64
Steel Type: Carbon
Grind: Convex
Construction: Awase/San-Mai
Cladding: Nickel Damascus
Finish: Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal Wa
Handle Material: Stabilized Birch  
Ferrule/Bolster Material: Black Horn
Total Length: 329mm
Spine Length: 200mm
Thickness of Spine at Handle: 5.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 128mm
Weight: 213g
Saya/Guard: Sold Seperately 

Brand: Morihei 森平
Made in: Sakai, Osaka, Japan
Line: Hisamoto Thick
Profile: Gyuto
Edge Length: 308mm
Blade Height: 60mm
Edge Steel: White #1
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Steel
Total Length: 455mm
Spine Length: 310mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 461g
Saya/Guard: Purchased Separately
 
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Nakaya Heiji 中屋平次
Smith:  Nakaya Heiji 中屋平次
Sharpener:  Nakaya Heiji 中屋平次
Made in: Hito City, Ibaraki - Japan
Line: Semi-Stainless Migaki
Profile: Gyuto
Edge Length: 265mm
Blade Height: 52mm
Edge Steel: Undisclosed Swedish Semi-Stainless
Steel Type: Semi-Stainless
Grind: Wide Double Bevel
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Chestnut
Ferrule/Bolster Material: Buffalo Horn
Total Length: 425mm
Spine Length: 278mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 149mm
Weight: 238g
Saya/Guard: Sold Seperately

Brand: Nakaya Heiji 中屋平次 
Made in: Mito City, Ibaraki - Japan
Smith: Nakaya Heiji 中屋平次
Sharpener: Nakaya Heiji 中屋平次
Line: Semi Stainless
Profile: Gyuto/Chef
Edge Length: 300mm
Blade Height: 34.7mm
Edge Steel: Semi Stainless
Steel Type: Carbon
Construction: Awase/Ni-Mai
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Oak
Ferrule/Bolster Material: Buffalo Horn Ferrule
Total Length: 432mm
Spine Length: 287mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144.5mm
Weight: 238g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Netherton Foundry
Made In: Shropshire, England
Line: Spun Iron
Materials: Spun Iron
Outer Diameter: 520mm
Inner Diameter: 510mm
Thickness: 2mm
Height: 260mm
Handle Length: Prospector Handles
Pan Weight: 6.5kg

Brand: Netherton Foundry
Made In: Shropshire, England
Materials: Spun Iron, Spun Copper, Wood 
Bottom Diameter: 305mm
Bottom Height: 140mm
Bottom Weight: 3597g
Grate Diameter: 285mm
Grate Thickness: 7.5mm
Grate Weight: 2633g
Pot Diameter: 310mm
Pot Height: 107mm
Pot Weight: 3586g
Tagine Diameter: 290mm
Tagine Height: 150mm
Tagine Weight: 795g

 

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Hybrid Western
Total Length: 379mm
Edge Length: 231mm
Spine Length: 250mm
Blade Height: 46.5mm
Thickness at Spine: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 126mm
Weight: 217g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Choyo  重陽
Profile: Gyuto
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Wide Double Bevel
Hand Orientation: Ambidextrous 
Handle: Ho Wood Wa
Total Length: 378mm
Edge Length: 222mm
Spine Length: 244mm
Blade Height: 46mm
Thickness at Spine: 3.1mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 134mm
Weight: 164g

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made in: Sakai, Osaka - Japan
Line: Kikuzuki Uzu
Profile: Gyuto
Edge Length: 221mm
Blade Height: 51mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Wa
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn Ferrule
Total Length: 377mm
Spine Length: 243mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.9mm 
Handle Length: 134mm
Weight: 192g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Santoku
Edge Length: 164mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 314mm
Spine Length: 185mm
Thickness of Spine at Handle: 3.0mm 
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 128mm
Weight: 129g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Gyuto
Edge Length: 195mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 343mm
Spine Length: 214mm
Thickness of Spine at Handle: 3.2mm 
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 129mm
Weight: 146g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Gyuto
Edge Length: 295mm
Blade Height: 42mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 343mm
Spine Length: 212mm
Thickness of Spine at Handle: 3.2mm 
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Weight: 140g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Gyuto
Edge Length: 226mm
Blade Height: 43mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 380mm
Spine Length: 246mm
Thickness of Spine at Handle: 3.3mm 
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 135mm
Weight: 147g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Gyuto
Edge Length: 252mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 410mm
Spine Length: 272mm
Thickness of Spine at Handle: 3.4mm 
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 138mm
Weight: 200g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.