$300-$499

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Nakiri
Edge Length: 150mm
Blade Height: 53mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 166mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 128mm
Total Length: 294mm 
Weight: 186g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Gyuto
Edge Length: 222mm 
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 230mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 137mm
Total Length: 367mm 
Weight: 187g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Nakiri
Edge Length: 164mm 
Blade Height: 59mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 176mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 136mm
Total Length: 312mm
Weight: 199g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Santoku
Edge Length: 173mm 
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 184mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 128mm
Total Length: 311mm
Weight: 166g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Gyuto
Edge Length: 205mm 
Blade Height: 54mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 215mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 136mm
Total Length: 352mm
Weight: 192g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Kogetsu 光月
Smith: Goko Hamono 五香刃物製作所
Line: Mono SK
Profile: Honesuki Maru
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-Handed
Handle: Pakka Western
Total Length: 278mm
Edge Length: 155mm
Spine Length: 162mm
Blade Height: 33mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 115mm
Weight: 204g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Kogetsu 光月
Smith: Goko Hamono 五香刃物製作所
Line: Mono SK
Profile: Honesuki Kaku
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-Handed
Handle: Pakka Western
Total Length: 273mm
Edge Length: 152mm
Spine Length: 157mm
Blade Height: 42mm
Thickness at Spine: 3.1mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 113mm
Weight: 171g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Profile: Gyuto
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-handed
Handle: Pakka Western
Total Length: 371mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 52mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 121mm
Weight: 234g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel

This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Made in: Kashiwa City, Chiba - Japan
Smith: Yoshito Yamakawa 八間川義人
Profile: Sujihiki/Slicer
Edge Length: 184mm
Blade Height: 34mm
Edge Steel: SK
Steel Type: Carbon
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: "Messy" Migaki (there are scratches intentionally left on the blade from production)
Bevel: Double
Bevel Symmetry: ~10/90
Hand Orientation:  Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 188mm 
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.0mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 111mm
Total Length: 301mm 
Weight: 130g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: AH Carbon 一片 鋼
Made in: Sakai, Osaka - Japan
Profile: Gyuto
Edge Length: 275mm
Blade Height: 52mm
Edge Steel: Undisclosed Carbon
Steel Type: Carbon
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 125mm
Total Length: 399mm
Weight: 222g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Line: Kikuchiyo x Manzo
Made in: Sakai, Osaka - Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Manzō 万造
Profile: Mioroshi Deba
Edge Length: 214mm 
Blade Height: 42.5mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kido (diagonal pattern)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 230mm
Thickness of Spine at Handle: 5.8mm
Thickness ½ way: 5mm
Thickness ~1cm from Tip: 2.4mm
Handle Length: 140mm
Total Length: 367mm
Weight: 250g  
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Made in: Sakai-Osaka/ Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Manzō 万造
Line: Kikuchiyo x Manzo
Profile: Deba
Edge Length: 186mm
Blade Height: 55mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal 
Handle Material: Ebony 
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 201mm
Thickness of Spine at Handle: 8.4mm
Thickness ½ way: 6.2mm
Thickness ~1cm from Tip: 3.8mm
Handle Length: 139mm
Total Length: 333mm
Weight: 418g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai-Osaka, Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi 憲哉
Line: Tachi
Profile: Kiritsuke Yanagiba 
Edge Length: 287mm
Blade Height: 35.5mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (clad), Ni Mai
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 304mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 143mm
Total Length: 445mm
Weight: 223g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi 富樫
Sharpener: Kenya Togashi
Profile: Yanagiba
Edge Length: 312mm
Blade Height: 37mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 336mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 150mm
Total Length: 486mm
Weight: 2590g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: YG
Made in: Echizen, Fukui - Japan
Profile: Nakiri
Edge Length: 160mm
Blade Height: 52.7mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 180mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: .5mm
Thickness ~1cm from Tip: .7mm
Handle Length: 128mm
Total Length: 308mm
Weight: 154g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Isamitsu 
Line: White #1 Stainless Clad
Made in: Ibaraki - Japan
Smith: Abe Isamitsu Blacksmith 安倍勇光打ち刃物
Profile: Santoku/Home Chef
Edge Length: 185mm
Blade Height: 53mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Kurouchi (Forged)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Rosewood
Ferrule/Bolster Material: Wood (Unspecified)
Spine Length: 202mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 140mm
Total Length: 340mm
Weight: 206g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon with Stainless Clad
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: K Sabatier
Made in: Thiers - France
Line: 2 Handed Curved Leaf
Profile: Cleaver
Edge Length: 353mm
Blade Height: 164mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Nylon
Ferrule/Bolster Material: N/A
Total Length: 760mm
Spine Length: 305mm
Thickness of Spine at Handle: 5.0mm
Thickness ½ way: 5.0mm
Thickness ~1cm from Tip: 4.5mm
Handle Length: 454mm
Weight: 3.256kg
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: lionSTEEL
Made In: Maniago - Italy
Line: T6
Style: Fixed Blade
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: CPM 3V
Steel Type: Carbon
Blade Length: 150mm
Blade Height: 44.6mm
Blade Thickness: 5.2mm
Blade Construction: Mono-Steel
Handle/Tang Construction: Full Tang
Bolster/Guard: Canvas Micarta 
Pommel: Extended Tang
Handle Material: SOLID Canvas Micarta
Handle Color: Green
Blade Finish/Color: Black
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 140mm
Total Length: 295mm
Weight: 372g
Sheath/Clip: Kydex and Nylon Belt Sheath
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: lionSTEEL
Line: TM1
Made In: Maniago - Italy
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 84mm
Blade Height: 34.7mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Micarta
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Washers/Pivot System: IKBS Ball Bearings
Pommel: Tungsten Carbide Glass Breaker
Spacer/Spring: AISI 420 Stainless
Handle/Scale Material: Micarta
Handle/Scale Color: Black
Blade Finish/Color: Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 116mm
Total Length Open: 207mm
Total Length Closed: 120mm
Spine Thickness: 4.3mm
Weight: 144g
Sheath/Clip: Leather Case/Reversible Stainless Pocket Clip
Lanyard Hole: Yes

Brand: lionSTEEL
Line: TM1
Made In: Maniago - Italy
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 84mm
Blade Height: 34.7mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Micarta
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Washers/Pivot System: IKBS Ball Bearings
Pommel: Tungsten Carbide Glass Breaker
Spacer/Spring: AISI 420 Stainless
Handle/Scale Material: Micarta
Handle/Scale Color: Black
Blade Finish/Color: Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 116mm
Total Length Open: 207mm
Total Length Closed: 120mm
Spine Thickness: 4.3mm
Weight: 144g
Sheath/Clip: Reversible Stainless Pocket Clip
Lanyard Hole: Yes