$100-$199

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 295mm
Edge Length: 171mm
Spine Length: 174mm
Handle Length: 118mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 157g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 288mm 
Edge Length: 160mm 
Spine Length: 170mm 
Handle Length: 117mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.5mm 
Thickness of Spine ~1cm from Tip: 1.5mm 
Weight: 187g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 307mm 
Edge Length: 185mm 
Spine Length: 184mm 
Handle Length: 128mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.6mm 
Thickness of Spine Half Way: 1.6mm 
Thickness of Spine ~1cm from Tip: 1.2mm 
Weight: 177g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: HG
Profile: Gyuto
Edge Length: 216mm
Blade Height: 46mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 226mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .3mm
Handle Length: 145mm
Total Length: 370mm
Weight: 148g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Seki, Gifu - Japan 
Line: HG
Profile: Santoku
Edge Length: 185mm
Blade Height: 45mm
Edge Steel: Unclassified Stainless
Steel Type: Stainless Steel
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Tsuchime Damascus 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous  
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 196mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 135mm
Total Length: 330mm
Weight: 136g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Made in: Seki, Gifu - Japan 
Profile: Cake Knife
Edge Length: 303mm 
Blade Height: 41mm  
Edge Steel: AUS-8 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 313mm 
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 132mm 
Total Length: 445mm 
Weight: 240g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Hiragana
Profile: Cleaver
Edge Length: 160mm
Blade Height: 87mm (heel), 113mm (tip)
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Yo (western) Handle
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 165mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 4.8mm
Thickness ~1cm from Tip: 4.8mm
Handle Length: 140mm
Total Length: 305mm
Weight: 830g
Saya/Guard: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 112mm
Blade Height: 64mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 335mm
Spine Length: 210mm
Thickness of Spine at Handle: 4.3mm 
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 124mm
Weight: 358g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless Steel
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally betwxeen preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片) 
Line: Hiragana WS
Producing Area: Seki-Gifu/ Japan 
Profile: Santoku
Edge Length: 185mm
Edge Steel: AUS-8
Steel Type: Stainless 
Cladding: Stainless 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal 
Total Length: 320mm
Spine Length: 294mm
Blade Height: 45mm
Thickness at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness at Tip: 0.6mm
Handle Length: 122mm 
Weight: 123g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Hiragana WS
Profile: Gyuto
Edge Length: 216mm
Blade Height: 45.5mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (mono-steel)
Finish: Migaki (Standard)
Bevel: Double (asymmetrical)  
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Octagonal Pakka
Total Length: 350mm
Spine Length: 225mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 125mm
Weight: 125g
Saya/Guard: Purchased Separately 

Brand: Hitohira ひとひら 
Line: Kuma Blue #2
Made in: Seki-Gifu, Japan
Profile: Santoku/Home Chef
Edge Length: 170mm
Blade Height: 47mm
Edge Steel: Aogami #2 (Blue #2)
HRC: 59±1HRC 
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Stainless 
Finish: Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: Symmetrical
Hand Orientation: Ambidextrous 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 174mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 121mm
Total Length: 294mm
Weight: 149g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon with Stainless Cladding

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Hitohira
Line: Imojiya - SG2
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Santoku
Edge Length: 180mm
Edge Steel: SG2
Hardness: 62-64 HRC
Steel Type: Stainless
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western pakka
Total Length: 297mm
Spine Length: 180mm
Handle Length: 110mm
Blade Height: 47mm
Thickness: 1.7mm
Weight: 166g
Saya/Guard: Sold Separately 

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan 
Line: Imojiya TH
Profile: Bread
Edge Length: 224mm
Blade Height: 37mm
Edge Steel: DSR-1K6 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Serrated
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 246mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 134mm
Total Length: 378mm
Weight: 144g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Gyuto
Edge Length: mm
Blade Height: mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A (Mono-Steel)
Spine Length: 216mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 130mm
Total Length: 344mm
Weight: 140g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Chinese Cleaver
Edge Length: 220mm
Blade Height: 110mm
Edge Steel:  DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double 
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 224mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 2mm
Handle Length: 104mm
Total Length: 329mm
Weight: 490g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)  
Made In: Seki, Gifu - Japan  
Line: Imojiya TH
Profile: Bread Knife
Edge Length: 227mm
Blade Height: 37mm
Edge Steel: Mono DSR-1K6 
Steel Type: Stainless
Bevel: Serrated 
Bevel Symmetry: Right Handed Serrations
Hand Orientation: Ambidextrous
Handle: Magnolia (Ho)Wood & Buffalo Horn Ferrule, Octagonal 
Total Length: 374mm
Spine Length: 246mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1mm
Handle Length: 127mm
Weight: 109g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)  
Made In: Seki, Gifu - Japan  
Line: Imojiya TH
Profile: Bread Knife
Edge Length: 227mm
Blade Height: 37mm
Edge Steel: Mono DSR-1K6 
Steel Type: Stainless
Bevel: Serrated 
Bevel Symmetry: Right Handed Serrations
Hand Orientation: Ambidextrous
Handle: Teak & Resin Ferrule, Octagonal 
Total Length: 372mm
Spine Length: 245mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .6mm
Handle Length: 128mm
Weight: 113g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. 

Brand:  Hitohira ひとひら
Made in:  Seki, Gifu - Japan
Line: Imojiya TH
Profile: Gyuto
Edge Length: 241mm
Blade Height: 49mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 30/70 
Hand Orientation: Right Handed
Handle Shape: Western (yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 243mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .7mm
Handle Length: 120mm
Total Length: 366mm
Weight: 209g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Nakiri
Edge Length: 165mm 
Blade Height: 47mm 
Edge Steel: DSR-1K6 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 177mm 
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 128mm
Total Length: 305mm
Weight: 143g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.