Yoshikazu Tanaka

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made in: Sakai, Osaka - Japan
Line: Kikuzuki Kuro
Profile: Santoku
Edge Length: 167mm
Blade Height: 46mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn
Total Length: 315mm
Spine Length: 185mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 0.9mm 
Handle Length: 128mm
Weight: 154g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Kikuzuki Rin
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Sharpener: Ajioka-san 味岡
Profile: Santoku
Edge Length: 162mm
Blade Height: 41mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 127mm
Total Length: 315mm
Weight: 143g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  Hitohira ひとひら
Made in: Sakai, Osaka - Japan 
Smith: Tanaka Blacksmith 田中打刃物製作所 
Sharpener: Manzō 万造
Line: Tanaka x Manzo
Profile: Yanagiba
Edge Length: 264mm
Blade Height: 34mm
Edge Steel: Blue #1
Steel Type: Carbon
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Ho Wood 
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 277mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.0mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 139mm
Total Length: 417mm
Weight: 163g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: HADO 刃道
Line: Sumi
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Sharpener: Tadataka Maruyama
Profile: Gyuto
Edge Length: 200mm
Blade Height: 45mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry Bark with Oak Core
Ferrule/Bolster Material: N/A
Spine Length: 215mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: .5mm
Handle Length: 140mm
Total Length: 355mm
Weight: 170g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.