Stainless

Brand: Hitohira ひとひら (一片)
Line: MINAMO
Made in: Sakai, Osaka - Japan
Profile: Gyuto/Chef
Edge Length: 200mm 
Blade Height: 48mm
Edge Steel: ATS34
Steel Type: Stainless
Construction: Awase (Clad); San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Caramel Horn
Spine Length: 215mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 130mm
Total Length: 341mm
Weight: 161g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: MINAMO
Made in: Sakai, Osaka - Japan
Profile: Nakiri/Vegetable
Edge Length: 167mm
Blade Height: 60mm
Edge Steel: ATS34
Steel Type: Stainless
Construction: Awase (Clad); San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Caramel Horn
Spine Length: 185mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 135mm
Total Length: 318mm
Weight: 174g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Nakagawa VG10
Profile: Kiritsuke Yanagiba
Edge Length: 289mm
Blade Height: 40.5mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase Ni-Mai
Cladding: Soft Stainless
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle: Magnolia Wood 
Total Length: 458mm
Spine Length: 305mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 146mm
Weight: 204g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa 中川
Made in: Sakai, Osaka - Japan
Line: Nakagawa VG10 Damascus
Profile: Kiritsuke Yanagiba
Edge Length: 265mm
Blade Height: 34.5mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Right-Handed Single Bevel
Construction: Awase, Ni-Mai
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 417mm
Spine Length: 277mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 140mm
Weight: 194g
Saya/Guard: Sold Seperately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori
Line: Seiun
Made in: Sakai - Japan
Smith: Satoshi Nakagawa 
Profile: Gyuto
Edge Length: 201mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 215mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Total Length: 342mm
Weight: 182g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori
Line: Seiun
Made in: Osaka, Sakai - Japan
Smith: Satoshi Nakagawa 中川
Profile: Gyuto
Edge Length: 230mm
Blade Height: 50mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 242mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 135mm
Total Length: 377mm
Weight: 223g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Sakai Kikumori
Line: Seiun
Made in: Sakai - Japan
Smith: Satoshi Nakagawa 
Profile: Santoku
Edge Length: 170mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 129mm
Total Length: 314mm
Weight: 175mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori
Line: SPG STRIX
Made in: Sakai, Osaka - Japan
Profile: Gyuto
Edge Length: 200mm
Blade Height: 47.5mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 213mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 128mm
Total Length: 340mm
Weight: 188g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: TS10
Made in: Sakai, Osaka - Japan
Profile: Nakiri/Vegetable
Edge Length: 155mm
Blade Height: 55mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Oak
Ferrule/Bolster Material: N/A
Spine Length: 180mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way:  1.6mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 135mm
Total Length: 315mm
Weight: 168g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: TS10
Made in: Sakai, Osaka - Japan
Profile: Santoku/Home Chef
Edge Length: 165mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Oak
Ferrule/Bolster Material: N/A
Spine Length: 185mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 135mm
Total Length: 316mm
Weight: 144g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Sakai Kikumori 堺菊守 
Made in: Sakai, Osaka - Japan
Line: V5-SB
Profile: Kiritsuke Santoku
Edge Length: 190mm
Blade Height: 46mm
Edge Steel: VG5
Steel Type: Stainless
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western Black Pakka
Total Length: 325mm
Spine Length: 200mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 115mm
Weight: 181g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: VG5
Profile: Sujhihiki
Edge Length: 272mm
Blade Height: 40mm
Edge Steel: VG5
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Stainless Steel
Total Length: 402mm
Spine Length: 278mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 123mm
Weight: 220g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.