Sharpening Supplies

"Base" series; Does NOT include base

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Flattening Stones

Although all NSK stones are very wear resistant, these flattening/dressing stones are specifically formulated to counter the wear resistance and flatten at an impressive speed. They also work very well on natural stones as well, and the higher grit flattening plates will leave a scratch-free surface unlike many other diamond plates. The flattening stones are slotted to eliminate suction when rubbing against the sharpening stone.

If needed, coarser flattening grits can initially be used on higher grit sharpening stones to remove material quickly, as long as you condition the surface of the sharpening stone with a higher grit flattening plate before use in order to prevent overly-aggressive surface. Each grit of the flattening stones can be used on several different grits, so there is no need to get every single flattening grit for each corresponding grits of NSK sharpening stone you may have; see recommended grit ranges for each flattening stone below.

Flattening grits: 200, 400, 600, 1000, 3000, 6000

Recommended Use: Flattening grits from 200-1000 can be used on All NSK sharpening stones up to 1500 grit. All NSK sharpening stones with grits above 1000 should ideally be flattened with a grit as close to the stone's grit as possible. For example, a 3000 grit sharpening stone should be flattened with grits 3000 and above.

Brand: NSK
Length: 200mm
Width: 75mm
Height: 17mm
Weight: 468g
Grit Range: #600

Oboro Knife

The newest NSK series, Oboro Knife was designed specifically for kitchen knives, and are very effective on a wide variety of steels for a wide variety of services. The abrasives in Oboro Knife tend to cut deeper and faster than other NSK lines, thus they are the most ideal series for full-blade servicing such as thinning, repairing, and reprofiling. Ideal for seasoned to advanced users.

Oboro Knife grits are: 200, 400, 800, 2000, 4000, 6000

Brand: NSK Kogyo Ltd.
Grit Range: #400
Thickness: 3.5mm
Length: 200mm
Width: 75mm
Height: 26.5mm
Weight: 740g

Oboro Knife

The newest NSK series, Oboro Knife was designed specifically for kitchen knives, and are very effective on a wide variety of steels for a wide variety of services. The abrasives in Oboro Knife tend to cut deeper and faster than other NSK lines, thus they are the most ideal series for full-blade servicing such as thinning, repairing, and reprofiling. Ideal for seasoned to advanced users.

Oboro Knife grits are: 200, 400, 800, 2000, 4000, 6000

Brand: NSK Kogyo Ltd.
Thickness: 3.5mm
Length: 200mm
Width: 75mm
Height: 26.5mm
Weight: 740g
Grit Range: #800

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Length: 210mm
Width: 75mm
Height: 10mm
Weight: 700g
Grit: #140

The Atoma plate we know and love, with a handle!