Sale-able

Naniwa - Base - #1000/#3000 Combination Whetstone - With Case

faeaa-010-10003000

€57,95

Brand: Naniwa ナニワ研磨工業
Stone Length: 185mm
Stone Width: 65mm
Stone Height: 16.5mm
#1000 Grit Stone Weight: 402g
#3000 Grit Stone Weight: 379g

Soaking Requirement: 10-15 min

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Naniwa - Base - #1000/#3000 Combination Whetstone - With Case

Naniwa - Goken Kagayaki - Whetstone - #1000/#3000 Grit

LAEAA-142-100

€83,95

Brand: Naniwa ナニワ研磨工業
Stone Length: 270mm
Stone Width: 70mm
Stone Height: 10mm
#1000 Grit Stone Weight: 315g
#3000 Grit Stone Weight: 297g

Soaking Requirement: Several minutes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Naniwa - Goken Kagayaki - Whetstone - #1000/#3000 Grit

Naniwa - Whetstone - Goken Arata - #3000

LAEAA-110-3000

€74,95

Grit: #3000
Case Length: 240mm
Case Width: 80mm
Case Height: 35mm
Stone Length: 210mm
Stone Width: 70mm
Stone Height: 15mm
Total Weight: 707g
Nagura Included: No

Naniwa - Whetstone - Goken Arata - #3000

Shapton - Synthetic Whetstone - Kuromaku Series - #2000

adeaa-010-02000

€48,95

Stone Length: 210mm
Stone Width: 70mm
Stone Height: 15.6mm
Stone Weight: 538g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Shapton - Synthetic Whetstone - Kuromaku Series - #2000

Tsuboman - Atoma Diamond Plate - #1200

lneyd-010-1200

€71,95

Total Length: 210mm
Total Height: 10mm
Total Width:75mm
Weight: 540g
Grit: #1200

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Tsuboman - Atoma Diamond Plate - #1200 - Replacement Plate

LNEYD-020-1200

€55,95

Intended to replace the upper surface of the Atom Diamond Sharpening Stone - #1200.

With use, diamond sharpening stone becomes worn and finer. When the diamond surface is worn to such an extent that it no longer serves its purpose, the top plate can be replaced with a replacement diamond plate that is glued to the aluminum base.

The back of the plate has a double-sided adhesive which makes it quick and easy to replace. The plate is made of 1mm thick stainless steel. Along with the base and adhesive tape, the plate measures 1.5mm. Be precise and pay close attention when applying the replacement plate to the aluminum base, it is important that the replacement plate is sitting flat and straight on the base.

We do not recommend using the replacement plate without the aluminum base.