Sale-able

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Pakka Western
Total Length: 392mm
Edge Length: 270mm
Spine Length: 275mm
Blade Height: 40mm
Thickness at Spine: 2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 115mm
Weight: 182g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Pointed Butcher
Edge Length: 285mm
Blade Height: 55mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 440mm
Spine Length: 283mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 0.6mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 157mm
Weight: 232g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Line: STK
Profile: Sujihiki/Slicer
Edge Length: 272mm
Blade Height: 45mm
Edge Steel: VG-7
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (Hammered), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: N/A
Spine Length: 287mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 140mm
Total Length: 426mm
Weight: 165g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Ashi
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Gyuto
Edge Length: 273mm
Blade Height: 51.2mm
Edge Steel: Swedish Stainless Steel
Steel Type: Stainless
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: .3mm
Handle Length: 124mm
Total Length: 400mm
Weight: 246mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: KH
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 41mm
Edge Steel: Unclassified Stainless Steel
Steel Type: Stainless 
Hardness: 60±1HRC 
Construction: Mono-steel
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed  
Handle Shape: D-Shape
Handle Material: Ho/Magnolia
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 287mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145mm
Total Length: 433mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Goko Hamono 五香刃物製作所
Made in: Japan
Line:  Kogetsu 光月
Profile: Gyuto
Edge Length: 265mm
Blade Height: 54mm
Edge Steel: SK
Steel Type: Carbon
Grind: Convex
Construction: Mono-steel
Cladding: N/A
Finish: Migaki/Messy
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Total Length: 400mm
Spine Length: 270mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 130mm
Weight: 284g
Saya/Guard: Purchased Separately 

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Made in: Kashiwa City, Chiba - Japan
Smith: Yoshito Yamakawa 八間川義人
Profile: Gyuto/Chef
Edge Length: 305mm
Blade Height: 62mm
Edge Steel: SK5
Steel Type: Carbon
Construction: Zenko (mono-steel)
Cladding: N/A Mono-steel
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: ~10/90
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 305mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 143mm
Total Length: 448mm
Weight: 339g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand:  Hitohira ひとひら
Made in: Sakai, Osaka - Japan 
Smith: Tanaka Blacksmith 田中打刃物製作所 
Sharpener: Manzō 万造
Line: Tanaka x Manzo
Profile: Yanagiba
Edge Length: 264mm
Blade Height: 34mm
Edge Steel: Blue #1
Steel Type: Carbon
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Ho Wood 
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 277mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.0mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 139mm
Total Length: 417mm
Weight: 163g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Bread Knife/Pankiri
Edge Length: 273mm
Blade Height: 46mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 281mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 121mm
Weight: 200g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 35mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 280mm 
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 116mm
Weight: 250g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 35mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 280mm 
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 116mm
Weight: 250g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Blacksmith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Kiritsuke
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ziricote Wa
Total Length: 430mm
Edge Length: 257mm
Spine Length: 278mm
Blade Height: 46mm
Thickness at Spine: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.6
Handle Length: 152mm
Weight: 281g
Saya/Guard: Yes, Ho Wood

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Smith:  Tanaka 田中
Profile: Saber Yanagiba
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon 
Cladding: Soft Iron
Bevel: Single
Hand Orientation: Right
Handle: Ebony Wa
Total Length: 414mm
Edge Length: 260mm
Spine Length: 275mm
Blade Height:37mm
Thickness at Spine: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 2.6mm
Handle Length: 138mm
Weight: 207g
Saya/Guard: Purchased Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Black Smith: Kikuchiyo 菊千代
Sharpener: Manzo 万造
Profile: Yanagiba
Edge Steel: Blue #2 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ho Wood Wa
Total Length: 423mm
Edge Length: 264mm
Spine Length: 279mm
Blade Height: 33mm
Thickness at Spine: 4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 145mm
Weight: 188g
Saya/Guard: Yes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu, Japan
Line: KH
Profile: Sujihiki
Edge Length: 268mm 
Blade Height: 41mm
Edge Steel: Unclassified
Steel Type: Stainless 
Hardness: 60±1HRC 
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed  
Handle Shape: Western (Yo)
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 118mm
Total Length: 389mm
Weight: 185g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.