In stock

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 180mm
Hardness: 59 HRC
Steel Type: Stainless
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 313mm
Spine Length: 190mm
Handle Length: 121mm
Blade Height: 45mm
Thickness: 2.5mm
Weight: 185g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 165mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 295mm
Spine Length: 172mm
Handle Length: 122mm
Blade Height: 46mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.4mm
Weight: 187g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Higonokami 肥後守
Smith: Mitsuo Nagao 永尾 光雄
Producing Area: Miki-Hyogo/ Japan
Steel Type: Carbon
Steel: Blue (Aogami) #2, Soft Iron Clad
Handle: Brass
Hand Orientation: Ambidextrous
Total Length: 157mm
Blade Length: 63mm
Blade Height: 12mm
Handle Length: 93mm
Weight: 39g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 337mm 
Edge Length: 215mm 
Spine Length: 215mm 
Handle Length: 120mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.4mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 0.5mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Naniwa ナニワ研磨工業
Stone Length: 270mm
Stone Width: 70mm
Stone Height: 10mm
#1000 Grit Stone Weight: 315g
#3000 Grit Stone Weight: 297g

Soaking Requirement: Several minutes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Yukiwa
Made In: Japan
Total Height: 200mm
Total Diameter: 85mm
Weight: 266g
Capacity: 500ml

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen-Fukui/ Japan
Profile: Petty
Size: 130mm
Steel Type: Stainless Steel
Steel: SG2, Soft Stainless Clad
Handle: Wine Pakka Western
Total Length: 244mm
Edge Length: 131mm
Handle to Tip Length: 134mm
Blade Height: 29mm
Thickness: 1.3mm
Handle Length: 108mm
Weight: 71g
Hand Orientation: Ambidextrous
Hardness: 62-63HRC
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: TP
Profile: Gyuto
Edge Length: 211mm
Edge Steel: SG2
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Wine Pakka Western 
Total Length: 338mm 
Spine Length: 220mm 
Blade Height: 45mm 
Thickness at Spine: 1.5mm 
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.6
Handle Length: 119mm 
Weight: 154g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 295mm
Edge Length: 171mm
Spine Length: 174mm
Handle Length: 118mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 157g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

"Base" series; Does NOT include base

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Line: Hisamoto INOX
Profile: Petty
Edge Length: 120mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 58-60 
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed 
Handle: Pakka Western
Total Length: 230mm
Spine Lengh 130mm
Blade Height: 27mm
Thickness: 1.5mm
Handle Length: 100mm
Weight: 72g
Final Edge: Morihei 森平

 CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya Kuma
Smith: Seto 瀬戸 
Producing Area: Seki-Gifu/ Japan 
Profile: Nakiri
Edge Length: 165mm
Edge Steel: Blue #2 (Aogami)
Steel Type: Stainless Clad Carbon Core
Cladding: Soft Iron Tsuchime 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 296mm
Spine Length: 173mm
Blade Height: 49mm
Thickness: 1.7mm
Handle Length: 120mm
Weight: 170g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisements: This blade has a carbon core steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira
Line: T10
Profile: Gyuto
Edge Length: 181mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western 
Total Length: 306mm 
Spine Length: 187mm 
Blade Height: 42mm 
Thickness at Spine: 1.7mm 
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 120mm 
Weight: 134g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.