In stock

RYUSEN - BONTEN UNRYU WA - VG10 Damascus - 135mm Petty - Wenge Handle

€224,95

Brand: Ryusen 株式会社龍泉刃物
Line: Bontenunryu
Profile: Petty/Utility
Edge Steel: VG10
Hardness: 60HRC
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Wenge Wa
Total Length: 263mm
Edge Length: 135mm
Spine Length: 147mm
Blade Height: 27mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 115mm
Weight: 64g

RYUSEN - BONTEN UNRYU WA - VG10 Damascus - 135mm Petty - Wenge Handle

RYUSEN - BONTEN UNRYU KAI - VG10 Damascus - 175mm Santoku - Quince Handle

€275,95

Brand: Ryusen 株式会社龍泉刃物
Line: Botenunryu KAI
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Quince
Total Length: 315mm
Edge Length: 175mm
Spine Length: 187mm
Blade Height: 46mm
Thickness at Spine: 2.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .4mm
Handle Length: 128mm
Weight: 127g

RYUSEN - BONTEN UNRYU KAI - VG10 Damascus - 175mm Santoku - Quince Handle

STEELPORT Knife Co. - 52100 Differentially Hardened - 10" Bread Knife - Integral Bolster Maple Burl Handle

€420,95

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Bread Knife
Edge Length: 250mm
Blade Height: 42mm
Edge Steel:52100
HRC: 65
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 380mm
Spine Length: 250mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 130mm
Weight: 213g
Saya/Guard: Purchased Separately

The STEELPORT Bread Knife is designed to perform equally well cutting bread with hard crusts and softer loafs. It can also be used as a serrated slicer for cutting through BBQ meats, and other hard crust foods.

The STEELPORT Bread Knife features a unique ‘Wavy’ serration (rather than a pointed serration) resulting in a finer, sharper edge which requires less of sawing motion and can slice, rather than saw, through food with ease and is less destructive to both the food and cutting board.

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

STEELPORT Knife Co. - 52100 Differentially Hardened - 10" Bread Knife - Integral Bolster Maple Burl Handle

STEELPORT Knife Co. - 52100 Differentially Hardened - 10" Slicer - Integral Bolster Maple Burl Handle

€373,95

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Slicer
Edge Length: 255mm
Blade Height: 42mm
Edge Steel: 52100
HRC: 65
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 382mm
Spine Length: 252mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 130mm
Weight: 236g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

STEELPORT Knife Co. - 52100 Differentially Hardened - 10" Slicer - Integral Bolster Maple Burl Handle

STEELPORT Knife Co. - 52100 Differentially Hardened - 4" Paring Knife - Integral Bolster Maple Burl Handle

€233,95

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Chef Knife
Edge Length: 105mm
Blade Height: 30mm
Edge Steel:52100
HRC: 65
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 220mm
Spine Length: 115mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

STEELPORT Knife Co. - 52100 Differentially Hardened - 4" Paring Knife - Integral Bolster Maple Burl Handle

RYUSEN - BONTEN UNRYU WA - VG10 DAMASCUS - 240mm Kengata Sujihiki - Wenge Handle

€378,95

60HRC Hardness

Brand: Ryusen 株式会社龍泉刃物
Line: Botenunryu
Profile: Kengata Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric
Handle: Wenge Wa
Total Length: 380mm
Edge Length: 250mm
Spine Length: 254mm
Blade Height: 32mm
Thickness at Spine: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 126mm
Weight: 119g

RYUSEN - BONTEN UNRYU WA - VG10 DAMASCUS - 240mm Kengata Sujihiki - Wenge Handle

Blenheim Forge - Stainless Clad Blue Super - 125mm Petty - Fumed-Oak Handle

€275,95

Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Stainless Clad
Profile: Petty
Edge Length: 125mm
Blade Height:
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length:
Thickness of Spine at Handle: 3mm
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length: 250mm
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Blenheim Forge - Stainless Clad Blue Super - 125mm Petty - Fumed-Oak Handle

Blenheim Forge - Stainless Clad Blue Super - 170mm Santoku - Fumed-Oak Handle

€406,95

Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Stainless Clad
Profile: Santoku
Edge Length: 170mm
Blade Height:
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length:
Thickness of Spine at Handle: 3mm
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length: 310mm
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Blenheim Forge - Stainless Clad Blue Super - 170mm Santoku - Fumed-Oak Handle

Blenheim Forge - Stainless Clad Blue Super - 165mm Nakiri - Fumed-Oak Handle

€424,95

Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Stainless Clad
Profile: Nakiri
Edge Length: 165mm
Blade Height:
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length:
Thickness of Spine at Handle: 3mm
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length: 310mm
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Blenheim Forge - Stainless Clad Blue Super - 165mm Nakiri - Fumed-Oak Handle

Blenheim Forge - Stainless Clad Blue Super - 205mm Gyuto - Fumed-Oak Handle

€452,95

Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Stainless Clad
Profile: Gyuto
Edge Length: 205mm
Blade Height:
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length:
Thickness of Spine at Handle: 3mm
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length: 350mm
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Blenheim Forge - Stainless Clad Blue Super - 205mm Gyuto - Fumed-Oak Handle

Blenheim Forge - Classic Range - Blue Super - 220mm Gyuto - English Walnut Handle

€396,95

Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Classic Range
Profile: Gyuto
Edge Length: 220mm
Blade Height:
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length:
Thickness of Spine at Handle: 3mm
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length: 365mm
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Blenheim Forge - Classic Range - Blue Super - 220mm Gyuto - English Walnut Handle

Blenheim Forge - Classic Range - Blue Super - 150mm Nakiri - English Walnut Handle

€326,95

Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Classic Range
Profile: Nakiri
Edge Length: 150mm
Blade Height:
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length:
Thickness of Spine at Handle: 3mm
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length: 290mm
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Blenheim Forge - Classic Range - Blue Super - 150mm Nakiri - English Walnut Handle

Blenheim Forge - Classic Range - Blue Super - 175mm Bunka - English Walnut Handle

€340,95

Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Classic Range
Profile: Santoku
Edge Length: 175mm
Blade Height:
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length:
Thickness of Spine at Handle: 3mm
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length: 310mm
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Blenheim Forge - Classic Range - Blue Super - 175mm Bunka - English Walnut Handle

Blenheim Forge - Classic Range - Blue Super - 125mm Petty - English Walnut Handle

€233,95

Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Classic Range
Profile: Petty/Utility
Edge Length: 125mm
Blade Height:
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length:
Thickness of Spine at Handle: 3mm
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length: 250mm
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Blenheim Forge - Classic Range - Blue Super - 125mm Petty - English Walnut Handle

Florentine Kitchen Knives - Stacked Handle - Carbon - 205mm Chef - Black & Green Handle

€275,95

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Gyuto
Edge Length: 205mm
Blade Height: 57mm
Edge Steel: XC75
Steel Type: Carbon
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 335mm
Spine Length: 218mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 117mm
Weight: 200-210g
Saya/Guard: Sold Separately

Florentine Kitchen Knives - Stacked Handle - Carbon - 205mm Chef - Black & Green Handle

Florentine Kitchen Knives - Stacked Handle - Carbon - 205mm Chef - Black & Red Handle

€275,95

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Gyuto
Edge Length: 205mm
Blade Height: 57mm
Edge Steel: XC75
Steel Type: Carbon
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 335mm
Spine Length: 218mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 117mm
Weight: 200-210g
Saya/Guard: Sold Separately

Florentine Kitchen Knives - Stacked Handle - Carbon - 205mm Chef - Black & Red Handle

Florentine Kitchen Knives - Stacked Handle - Carbon - 205mm Chef - Black & White Handle

€275,95

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Gyuto
Edge Length: 205mm
Blade Height: 57mm
Edge Steel: XC75
Steel Type: Carbon
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 335mm
Spine Length: 218mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 117mm
Weight: 200-210g
Saya/Guard: Sold Separately

Florentine Kitchen Knives - Stacked Handle - Carbon - 205mm Chef - Black & White Handle

Florentine Kitchen Knives - Stacked Handle - Carbon - 205mm Chef - Black & Blue Handle

€275,95

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Four
Profile: Gyuto
Edge Length: 205mm
Blade Height: 57mm
Edge Steel: XC75
Steel Type: Carbon
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 335mm
Spine Length: 218mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 117mm
Weight: 200-210g
Saya/Guard: Sold Separately

Florentine Kitchen Knives - Stacked Handle - Carbon - 205mm Chef - Black & Blue Handle

Nigara Hamono - Mt. Fuji Mizu Honyaki - White #1 - 300mm Kiritsuke Yanagiba - No Handle

€1.955,95

Brand: Nigara Hamono 二唐刃物鍛造所
Made in: Hirosaki, Aomori - Japan
Smith: Yoshizawa Tsuyoshi 吉澤剛
Line: Mt. Fuji Honyaki
Profile: Kiritsuke Yanagiba
Edge Length: 288mm
Blade Height: 41.3mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Honyaki (differentially hardened), Mt. Fuji Hamon
Cladding: N/A
Finish: Forced Patina, Mt. Fuji Hamono
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 400mm (including tang)
Spine Length: 300mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: N/A
Weight: 200g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Nigara Hamono - Mt. Fuji Mizu Honyaki - White #1 - 300mm Kiritsuke Yanagiba - No Handle

STEELPORT Knife Co. - 52100 Differentially Hardened - 6" Boning Knife - Integral Bolster Maple Burl Handle

€326,95

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Chef Knife
Edge Length: 170mm
Blade Height: 52mm
Edge Steel: 52100
HRC: 65
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 296mm
Spine Length: 175mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 122mm
Weight: 188g
Saya/Guard: Purchased Separately

STEELPORT Knife Co. - 52100 Differentially Hardened - 6" Boning Knife - Integral Bolster Maple Burl Handle

Coutellerie Maria - Folding Knife - BigDog - XC75 - Forced Patina - 80mm - Ebony Handle

€326,95

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: BigDog
Style: Folding
Blade Profile: Drop Point
Grind: Concave
Blade Steel: XC75
Steel Type: Carbon
Blade Length: 80mm
Blade Height: 35mm
Blade Construction: Mono-Steel
Frame Construction: Solid
Opening Mechanism: Two Fingers/Pinch
Locking Mechanism: Friction/Thumb Lever
Handle/Scale Material: Ebony
Handle/Scale Color: Natural Wood
Blade Finish/Color: Forced Patina
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 120mm
Total Length Open: 202mm
Total Length Closed: 120mm
Spine Thickness: 2.5mm
Weight: 163g
Sheath/Clip: Purchased Separately
Lanyard Hole: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.