In stock

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Santoku
Edge Length: 184mm
Edge Steel: Ginsanko (Silver 3)
Steel Type: Stainless
Cladding: Stainless Nashiji
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry wood handle & ebony ferrule
Total Length: 315mm
Spine Length: 182mm
Handle Length: 133mm
Blade Height: 47mm
Thickness of Spine at Handle: 1.9mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 1mm
Weight: 125g
Saya: Sold Separately 

Please Note: These pictures and measurements are examples. Individual knives may differ
slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Nakiri
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless Kurouchi Nashiji
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal
Total Length: 315mm
Edge Length: 162mm 
Spine Length:  180mm
Blade Height: 51mm
Spine Thickness: 1.7mm
Handle Length: 135mm
Weight: 157g 
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平
Line: Hisamoto INOX
Profile: Santoku
Edge Steel: SUS-440
Steel Type: Stainless
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: 60/40
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 287mm
Edge Length: 165mm
Spine Length: 170mm
Blade Height: 47mm
Thickness: 1.5mm
Handle Length: 115mm
Weight: 150g

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Nakiri
Edge Length: 160mm
Blade Height: 46mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle:  Western Pakka
Total Length: 289mm
Spine Length: 170mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 118mm
Weight: 172g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 295mm
Edge Length: 171mm
Spine Length: 174mm
Handle Length: 118mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 157g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: 200
Profile: Chef
Edge Length: 
Blade Height: 
Edge Steel: 14C28N
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: G10
Ferrule/Bolster Material: N/A
Total Length: 
Spine Length: 
Thickness of Spine at Handle: 
Thickness ½ way: 
Thickness ~1cm from Tip: 
Handle Length: 
Weight: 
Saya/Guard: Leather Sleeve

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen, Fukui - Japan 
Line: GR
Profile: Santoku
Edge Length: 165mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Octagonal Rosewood Handle, Pakka Ferrule
Total Length: 304mm
Spine Length:178mm
Handle Length: 127mm
Blade Height: 45mm
Thickness of Spine at Handle: 2.6mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.5mm
Weight: 122g
Saya/Guard: Sold Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Ryusen 株式会社 龍泉刃物
Line: TANGANRYU
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Micarta Hybrid
Total Length: 315mm
Edge Length: 170mm
Spine Length: 171mm
Blade Height: 46mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 125mm
Weight: 203g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Seki-Gifu/ Japan
Profile: Santoku
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 300mm
Edge Length: 167mm
Spine Length: 175mm
Blade Height: 46mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.9mm
Thickness of Spine ~1cm from Tip: 1.0mm
Handle Length: 128mm
Weight: 82g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Kanehide
Line: Bessaku
Profile: Kashiratori
Steel Type: Semi-Stainless
Bevel: Asymmetric Double Bevel 
Bevel Symmetry: 90:10
Handle: Elastomer
Hand Orientation: Right Handed
Total Length: 292mm
Edge Length: 170mm
Spine Length: 160mm
Blade Height: 28mm
Handle Length: 135mm
Thickness of Spine at Handle: 2mm
Thickness of Spine Half Way: 2mm
Thickness of Spine ~1cm from Tip: 1mm
Weight: 122g
Saya/Guard: N/A

Brand: Windmuehlenmesser
Profile: Large Chef
Steel Type: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Plumwood
Total Length: 303mm
Edge Length: 173mm
Spine Length: 180mm
Blade Height: 44mm
Thickness at Spine: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1 cm from Tip: 0.4mm
Handle Length: 124mm
Weight: 137g

Brand: Hitohira ひとひら (一片) 
Line: Imojiya TH Damascus
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious 
Total Length: 330mm
Edge Length: 175mm
Spine Length: 193mm
Blade Height: 52mm
Handle Length: 140mm
Thickness of Spine at Handle: 1.9mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.1mm
Weight: 155g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu Wa
Profile: Nakiri
Edge Steel: VG-10
Hardness: 60HRC 
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 298mm
Edge Length: 165mm
Spine Length: 170mm
Blade Height: 47mm
Thickness at Spine: 2.5mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 117mm
Weight: 197g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Kogetsu 光月
Smith: Goko Hamono 五香刃物製作所
Line: White #1 Mono
Profile: Santoku
Edge Length: 185mm
Edge Steel: Shirogami (White #1)
Steel Type: Carbon
Cladding: None
Bevel: Double Bevel
Bevel Symmetry: 80/20
Hand Orientation: Right-handed
Handle: Wine Pakka Western 
Total Length: 305mm
Spine Length: 190mm
Blade Height: 53mm
Thickness at Spine: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 112mm
Weight: 202g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  K Sabatier
Made in: Thiers - France
Line: G10 200
Profile: Fillet
Edge Length: 178mm
Blade Height: 26mm
Edge Steel: 14C28N
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: G10
Ferrule/Bolster Material: N/A
Total Length: 296mm
Spine Length: 192mm
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 0.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 109mm
Weight: 116g
Saya/Guard: Leather Sleeve

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.