New!

Brand: Hitohira ひとひら
Made in: Japan
Line: Futana Polished
Profile: Nakiri
Edge Length: 164mm
Blade Height: 51mm
Edge Steel: AUS-10
Steel Type: Stainless
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Polished Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Tagayasan
Ferrule/Bolster Material: Ebony
Spine Length: 189mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 134mm
Total Length: 317mm
Weight: 171g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: Imojiya TH
Profile: Gyuto
Edge Length: 214mm
Blade Height: 47mm
Edge Steel: Yasuki Blue (Aogami) Super
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless 
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 223mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 137mm
Total Length: 360mm
Weight: 159g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Morihei 森平 
Made in: Tokyo, Japan
Line: Hisamoto Kurouchi
Profile: Nakiri
Edge Length: 161mm
Blade Height: 52mm
Edge Steel: Yasuki (Shirogami) #1/ White #1
Steel Type: Carbon Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Iron 
Finish: Kurouchi 
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: D-Shape
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 182mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 137mm
Total Length: 318mm
Weight: 147g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: ST Tsuchime Damascus Western
Profile: Sujihiki
Edge Length: 237mm
Blade Height: 39mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Damascus Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless
Total Length: 363mm
Spine Length: 241mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 122mm
Weight: 170g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Petty 
Edge Length: 135mm
Blade Height: 36mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel 
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Kurouchi 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut 
Ferrule/Bolster Material: Ziricote
Spine Length: 148mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 114mm
Total Length: 262mm
Weight: 70g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Petty 
Edge Length: 136mm
Blade Height: 36mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel 
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Kurouchi 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut 
Ferrule/Bolster Material: Rengas
Spine Length: 150mm
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 115mm
Total Length: 263mm
Weight: 69g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片
Made in: Seki-Gifu/ Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 112mm
Blade Height: 27mm
Edge Steel: VG-10
Steel Type: Stainless Steel 
Construction: Awase, San Mai
Cladding: Stainless Clad 
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Pakka 
Ferrule/Bolster Material: Pakka 
Spine Length: 128mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Total Length: 243mm
Weight: 73g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: MZ Chromax
Profile: Gyuto
Edge Length: 182mm
Blade Height: 43mm
Edge Steel: V-G1
Steel Type: Semi Stainless Steel 
Construction: Awase, San Mai
Cladding: Soft Stainless Clad
Finish: Migaki 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 187mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 118mm
Total Length: 304mm
Weight: 162g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: MZ Chromax
Profile: Santoku
Edge Length: 167mm
Blade Height: 46mm
Edge Steel: V-G1
Steel Type: Semi Stainless Steel 
Construction: Awase, San Mai
Cladding: Soft Stainless Clad
Finish: Migaki 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 172mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 118mm
Total Length: 290mm
Weight: 163g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら 
Made in: Sakai-Osaka/ Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Rikichi 利吉
Line: Kikuchiyo x  Rikichi 
Profile: Sakai-Osaka/ Japan
Edge Length: 141mm
Blade Height: 26mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 154mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 131mm
Total Length: 289mm
Weight: 83g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Profile: Paring
Edge Length: 100mm
Blade Height: 25mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 205mm
Spine Length: 110mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 96mm
Weight: 65-70g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Profile: Paring
Edge Length: 100mm
Blade Height: 25mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 205mm
Spine Length: 110mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 96mm
Weight: 65-70g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Profile: Paring
Edge Length: 100mm
Blade Height: 25mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 205mm
Spine Length: 110mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 96mm
Weight: 65-70g
Saya/Guard: Sold Separately 

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Profile: Paring
Edge Length: 100mm
Blade Height: 25mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless 
HRC: 60 HRC
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Micarta & Leather
Ferrule/Bolster Material: Brass
Total Length: 205mm
Spine Length: 110mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 96mm
Weight: 65-70g
Saya/Guard: Sold Separately 

Brand: Hitohira ひとひら (一片)
Made in: Sanjo-Niigata/ Japan
Line: TD SLD 
Profile: Santoku
Edge Length: 168mm
Blade Height: 49mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Grind: Wide Bevel
Construction: Awase/Clad
Cladding: Stainless
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Total Length: 310mm
Spine Length: 180mm
Thickness of Spine at Handle: 4.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 130mm
Weight: 141g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

 +Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo, Niigata - Japan
Steel Type: Carbon
Cladding: Soft Iron Clad 
HRC: 55-56
Handle: Burnt Oak Handle
Total Length: 330mm
Edge Length: 77mm
Weight: 725g

Includes a Leather Sheath with snaps & Lanyard.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: Canif
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: 14C28N
Steel Type: Stainless
Blade Length: 85m
Blade Height: 19.2mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Two-Handed Pinch
Locking Mechanism: N/A, Slip Joint
Spacer/Spring: Stainless
Handle/Scale Material: Stainless
Handle/Scale Color: Multicolor, Textured, Milled
Blade Finish/Color: Satin
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 195mm
Total Length Closed: 110mm
Spine Thickness: 1.6mm
Weight: 84g
Sheath/Clip: N/A
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: Canif
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: 14C28N
Steel Type: Stainless
Blade Length: 85m
Blade Height: 19.2mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Two-Handed Pinch
Locking Mechanism: N/A, Slip Joint
Spacer/Spring: Stainless
Handle/Scale Material: Stainless
Handle/Scale Color: Multicolor
Blade Finish/Color: Satin
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 195mm
Total Length Closed: 110mm
Spine Thickness: 1.6mm
Weight: 84g
Sheath/Clip: N/A
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: Canif
Style: Folding, Slip Joint
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: 14C28N
Steel Type: Stainless
Blade Length: 85m
Blade Height: 19.2mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Two-Handed Pinch
Locking Mechanism: N/A, Slip Joint
Spacer/Spring: Stainless
Handle/Scale Material: Stainless
Handle/Scale Color: Multicolor, Textured
Blade Finish/Color: Satin
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 195mm
Total Length Closed: 110mm
Spine Thickness: 1.6mm
Weight: 84g
Sheath/Clip: N/A
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: Canif
Style: Folding, Slip Joint
Blade Profile: Drop Point
Grind: Flat
Blade Steel: XC75
Steel Type: Carbon
Blade Length: 85m
Blade Height: 19.2mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Two-Handed Pinch
Locking Mechanism: N/A, Slip Joint
Spacer/Spring: Stainless
Handle/Scale Material: Stainless Scales, Brass Liners
Handle/Scale Color: Multicolor
Blade Finish/Color: Satin
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 195mm
Total Length Closed: 110mm
Spine Thickness: 1.6mm
Weight: 116g
Sheath/Clip: N/A
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Seji Okuda, makes contrasting black and white ceramic dishes in Shigaraki. Shigaraki is known as one of the famous cities for ceramics in Japan, and there are many pottery shops along the big road running through the heart of Shigaraki, with many ceramic artists living in the area. Okuda was born and raised in Shiga prefecture, and his father was a Shigaraki ceramic artist and teacher. From a young age Okuda watched his father work and was surrounded by ceramics each day.