New!

Brand: Hitohira ひとひら
Made in: Tosa, Kochi - Japan
Profile: Santoku
Edge Length: 124mm
Blade Height: 38.6mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double Bevel (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 135mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1mm
Handle Length: 115mm
Total Length: 247mm
Weight: 74g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya Kuma
Profile: Nakiri
Edge Length: 160mm
Blade Height: 48.5mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Tsuchime/Nashiji
Bevel: Double Bevel (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Spine Length: 168mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 290mm
Weight: 167g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Futana S3
Profile: Petty/Utility
Edge Length: 154mm
Blade Height: 29.5mm
Edge Steel: Ginsan (Silver #3)
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Migaki. (Standard)
Bevel: Double (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry Wood
Ferrule/Bolster Material: Ebony Wood
Spine Length: 165mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: .5mm
Handle Length: 125mm
Total Length: 291mm
Weight: 67g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 185mm
Blade Height: 45mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 196mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 135mm
Total Length: 330mm
Weight: 118g
Saya/Guard: Sold Separately 

Brand: Hitohira ひとひら
Line: TD
Made in: Sanjo, Niigata - Japan
Profile: Honesuki Kaku
Edge Length: 155mm
Blade Height: 40mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Maple
Spine Length: 173mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 124mm
Total Length: 296mm
Weight: 113g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is semi-stainless and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: TD Aogami #2 (blue #2)
Made in: Sanjo, Niigata - Japan
Profile: Gyuto
Edge Length: 213mm
Blade Height: 46.6mm
Edge Steel: Aogami #2 (blue #2)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double Bevel (symmetrical)
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Wenge
Ferrule/Bolster Material: Oak
Spine Length: 225mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .5mm
Handle Length: 130mm
Total Length: 355mm
Weight: 173g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Echizen NB
Made in: Echizen, Fukui - Japan
Profile: Nakiri/Vegetable
Edge Length: 163mm
Blade Height: 53mm
Edge Steel: Shirogami #2/ White #2
HRC: ±63
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Damascus 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Rengas
Spine Length: 179mm
Thickness of Spine at Handle: 4.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 128mm
Total Length: 307mm
Weight: 145g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Harima Forged
Made in: Miki-Hyogo/ Japan
Profile: Nakiri
Edge Length: 160mm
Blade Height: 47mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Stainless Clad
Finish: Migaki (standard)
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa Handle
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 177mm
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 128mm
Total Length: 305mm
Weight: 128g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら (一片)
Line: Harima Forged
Made in: Miki, Hyogo - Japan
Profile: Santoku/Home Chef
Edge Length: 165mm
Blade Height: 45mm
Edge Steel: Aogami #2 (blue #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Stainless
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 178mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 128mm
Total Length: 305mm
Weight: 113g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 183mm
Blade Height: 49mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.5mm
Handle Length: 117mm
Total Length: 302mm
Weight: 222g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Futana SB
Profile: Petty
Edge Length: 140mm
Blade Height: 28mm
Edge Steel: Super Aogami (Super Blue)
Steel Type: Carbon
HRC: 61±1
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi (Forge Finish), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherrywood
Ferrule/Bolster Material: Ebony
Spine Length: 154mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 125mm
Total Length: 278mm
Weight: 66g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement:  This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 175mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 178mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 119mm
Total Length: 297mm
Weight: 161g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 208mm
Blade Height: 45.8mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Finish: Migaki (standard)
Bevel: Asymmetric
Bevel Symmetry: 20:80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 217mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 140mm
Total Length: 357mm
Weight: 151g
Saya/Guard: Sold Separately 

Brand: Hitohira ひとひら
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Petty/Utility
Edge Length: 182mm
Blade Height: 38mm
Edge Steel: Shirogami #2 (white#2)
Steel Type: Carbon
Construction: Awase San Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi 
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Ambidextrous
Handle Shape: Oval
Handle Material: Magnolia (ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 197mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .6mm
Handle Length: 135mm
Total Length: 332mm
Weight: 116g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Paring
Edge Length: 94mm
Blade Height: 33mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Nashiji (textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 106mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 115mm
Total Length: 220mm
Weight: 52g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Petty/Utility
Edge Length: 196mm
Blade Height: 38.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Ambidextrous
Handle Shape: Oval
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 210mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 134mm
Total Length: 345mm
Weight: 127g
Saya/Guard: Sold Separately

Brand: Morihei 森平 
Line:  Kikuyu
Profile: Nakiri 
Edge Length: 159mm
Blade Height: 51mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Carbon Damascus
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 181mm
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 133mm
Total Length: 315mm
Weight: 129g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Imojiya ST
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 210mm
Blade Height: 49mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 59±1
Construction: Awase (Clad)
Cladding: Stainless Damascus
Finish: Tsuchime (Hammered), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless
Spine Length: 215mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 122mm
Total Length: 336mm
Weight: 186g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Morihei 森平
Line: Kikuyu
Profile: Nakiri
Edge Length: 157mm
Blade Height: 50mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Carbon Damascus
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Wenge
Ferrule/Bolster Material: N/A
Spine Length: 183mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 130mm
Total Length: 311mm
Weight: 130g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: KH
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 41mm
Edge Steel: Unclassified Stainless Steel
Steel Type: Stainless 
Hardness: 60±1HRC 
Construction: Mono-steel
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed  
Handle Shape: D-Shape
Handle Material: Ho/Magnolia
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 287mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145mm
Total Length: 433mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.