Japan

Brand: Hitohira ひとひら 
Line: Togashi Honyaki
Made in: Sakai, Osaka -Japan
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi 憲哉
Profile: Yanagiba
Edge Length: 318mm
Blade Height: 37mm 
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Honyaki (differentially hardened)
Cladding: N/A
Finish: Mirror Polish (kyomen)
Bevel: Single Bevel
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Taihei Makassar Ebony 
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 332mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 151mm 
Total Length: 485mm 
Weight: 290g 
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  Hitohira ひとひら
Made in: Sakai-Osaka, Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi 憲哉
Profile: Kiritsuke Yanagiba
Edge Length: 290mm
Blade Height: 35mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Honyaki (differentially hardened)
Cladding: N/A
Finish: Sanbonsugi Hamon
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Taihei Makassar Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 306mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 146mm
Total Length: 451mm
Weight: 212g 
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai-Osaka, Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi 憲哉
Line: Tachi
Profile: Kiritsuke Yanagiba 
Edge Length: 287mm
Blade Height: 35.5mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (clad), Ni Mai
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 304mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 143mm
Total Length: 445mm
Weight: 223g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics

Brand: Hitohira ひとひら (一片)
Producing Area: Sakai, Osaka - Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Line: Togashi Honyaki
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 35mm
Edge Steel: Shirogami #1/White #1 
Steel Type: Carbon
Construction: Mizu Honyaki
Cladding: N/A
Finish: Sanbonsugi
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: Octagonal 
Handle Material: Kurokaki Persimmon
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 305mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 145mm
Total Length: 450mm
Weight: 239g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Kenji Togashi 富樫
Sharpener: Kenya Togashi (憲哉)
Line: Mizu Honyaki
Profile: Yanagiba Sakimaru
Edge Length: 300mm
Blade Height: 35.5mm
Edge Steel: Shirogami #1/White #1 
Steel Type: Carbon
Construction: Honyaki
Cladding: N/A
Finish: Mirror Polished
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Wa 
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length: 457mm
Spine Length: 315mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 148mm
Weight: 262g
Saya/Guard: Yes, saya included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi 富樫
Sharpener: Kenya Togashi
Profile: Yanagiba
Edge Length: 312mm
Blade Height: 37mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 336mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 150mm
Total Length: 486mm
Weight: 2590g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi 憲哉
Line: Togashi Mizu Honyaki
Profile: Yanagiba
Edge Length: 287mm
Blade Height: 36mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Honyaki/Mono-Steel
Cladding: N/A
Finish: Etched Tanryumon
Bevel: Single, Ni-Mai
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Kurokaki Persimmon
Ferrule/Bolster Material: Black Buffalo Horn
Spine Length: 305mm
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 146mm
Total Length: 450mm
Weight: 224g
Saya/Guard: Saya

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: YG
Made in: Echizen, Fukui - Japan
Profile: Nakiri
Edge Length: 160mm
Blade Height: 52.7mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 180mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: .5mm
Thickness ~1cm from Tip: .7mm
Handle Length: 128mm
Total Length: 308mm
Weight: 154g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Isamitsu 
Line: White #1 Stainless Clad
Made in: Ibaraki - Japan
Smith: Abe Isamitsu Blacksmith 安倍勇光打ち刃物
Profile: Santoku/Home Chef
Edge Length: 185mm
Blade Height: 53mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Kurouchi (Forged)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Rosewood
Ferrule/Bolster Material: Wood (Unspecified)
Spine Length: 202mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 140mm
Total Length: 340mm
Weight: 206g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon with Stainless Clad
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Morihei 森平 
Line: Kurouchi White #1
Profile: Gyuto
Edge Length: 183mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Pakka Western (No Bolster)
Total Length: 300mm 
Spine Length: 186mm 
Blade Height: 50mm 
Thickness at Spine: 2.4mm 
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 115mm 
Weight: 162g
Saya/Guard: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Nigara Hamono  二唐刃物鍛造所
Made in: Hirosaki, Aomori - Japan
Smith: Yoshizawa Tsuyoshi 吉澤 剛
Line: Mt. Fuji Honyaki
Profile: Kiritsuke Yanagiba
Edge Length: 288mm
Blade Height: 41.3mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Honyaki (differentially hardened), Mt. Fuji Hamon
Cladding: N/A
Finish: Forced Patina, Mt. Fuji Hamono
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 400mm (including tang)
Spine Length: 300mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: N/A
Weight: 200g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Paring 
Edge Length: 85mm
Blade Height: 26mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 93mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 124mm
Total Length: 216mm
Weight: 54g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: KIKUZUKI RIN
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Santoku
Edge Length: 260mm
Blade Height: 33mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji (Textured)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 272mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 140mm
Total Length: 411mm
Weight: 177g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Kikuzuki Uzu
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Yanagiba
Edge Length: 260mm
Blade Height: 34mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad); Ni Mai
Cladding: Soft Iron
Finish: Damascus (Sekiso)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 273mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 140mm
Total Length: 414mm
Weight: 163g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa
Made in: Sakai, Osaka - Japan
Line: Blue #1 Damascus
Profile: Santoku
Edge Length: 168mm 
Blade Height: 47.4mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus/Sekiso
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Wa
Handle Material: Ebony wood, Buffalo Horn Ferrule
Total Length: 311mm
Spine Length: 186mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Weight: 159g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko
Profile: Santoku
Edge Length: 180mm
Blade Height: 45.8mm
Edge Steel: SK
Steel Type: Carbon
Construction: Mono-Steel/Zenko
Cladding: N/A
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Hand Asymmetric
Handle: Western
Handle Material: Pakka
Ferrule Material: Carbon Steel
Total Length: 300mm
Spine Length: 180mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Weight: 155g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守 
Line: Signed Super Blue
Made in: Osaka, Sakai — Japan
Smith: Tanaka  田中
Profile: Petty/Utility
Edge Length: 141mm
Blade Height: 29mm
Edge Steel: Aogami Super (Super Blue)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: All Mirror (Kyomen)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 151mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 125mm
Total Length: 276mm
Weight: 92g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

This knife is vintage and may include slight scratches, tarnish spots, etc. that it may have picked up over the decades. 

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Vintage Swedish Carbon
Profile: Gyuto
Edge Steel: K-121
Steel Type: Carbon
Cladding: N/A (Mono-steel blade)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Rosewood Western
Total Length: 398mm
Edge Length: 271mm
Spine Length: 273mm
Blade Height: 52mm
Thickness at Spine: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 120mm
Weight: 225g
Saya/Guard: Sold Separately 

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.