Honesuki

Brand: Kogetsu 光月
Smith: Goko Hamono 五香刃物製作所
Line: Mono SK
Profile: Honesuki Kaku
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-Handed
Handle: Pakka Western
Total Length: 273mm
Edge Length: 152mm
Spine Length: 157mm
Blade Height: 42mm
Thickness at Spine: 3.1mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 113mm
Weight: 171g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric 
Handle: Pakka Western
Total Length: 256mm
Edge Length: 137mm
Spine Length: 140mm
Handle Length: 113mm
Blade Height: 37mm
Thickness at Handle: 2.0mm
Thickness at Middle: 2.0mm
Thickness at Tip: 1.5mm
Weight: 143g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric 
Handle: Pakka Western
Total Length: 255mm
Edge Length: 148mm
Spine Length: 154mm
Handle Length: 103mm
Blade Height: 30mm
Thickness at Handle: 2.1mm
Thickness at Middle: 1.8mm
Thickness at Tip: 1.5mm
Weight: 157g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Kanehide
Line: Bessaku
Profile: Honesuki Maru
Steel Type: Semi-Stainless
Bevel: Asymmetric Double Bevel 
Bevel Symmetry: 90:10
Handle: Wood 
Hand Orientation: Right Handed
Total Length: 260mm
Edge Length: 150mm
Spine Length: 150mm
Blade Height: 29mm
Handle Length: 112mm
Thickness of Spine at Handle: 2mm
Thickness of Spine Half Way: 1.8mm
Thickness of Spine ~1cm from Tip: 0.6mm
Weight: 114g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Kanehide 兼秀
Line: Bessaku
Profile: Honesuki Maru
Steel Type: Semi-Stainless
Bevel: Asymmetric Double Bevel 
Bevel Symmetry: 10:90
Handle: Wood
Hand Orientation: Left Handed
Total Length: 257mm
Edge Length: 145mm
Spine Length: 147mm
Blade Height: 29mm
Handle Length: 111mm
Thickness of Spine at Handle: 2.2mm
Thickness of Spine Half Way: 2.1mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 115g
Saya: Purchase Separately.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Kanehide 兼秀
Line: Bessaku
Profile: Honesuki Kaku
Steel Type: Semi-Stainless
Bevel: Asymmetric Double Bevel 
Bevel Symmetry: 10/90
Handle: Elastomer
Hand Orientation: Right Handed
Total Length: 303mm
Edge Length: 180mm
Spine Length: 180mm
Blade Height: 41mm
Handle Length: 122mm
Thickness of Spine at Handle: 2.5mm
Thickness of Spine Half Way: 2.3mm
Thickness of Spine ~1cm from Tip: 1.3mm
Weight: 132g
Saya: Purchase Separately.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.