Hitohira - Togashi - White #1 Stainless Clad - Kasumi - 270mm Sujihiki - Ebony Handle

Brand: Hitohira ひとひら
Line: Ashi
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Gyuto
Edge Length: 246mm
Blade Height: 48mm
Edge Steel: Swedish Stainless Steel
HRC: ±59
Steel Type: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 247mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 126mm
Total Length: 373mm
Weight: 214g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Ashi
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Gyuto
Edge Length: 273mm
Blade Height: 51.2mm
Edge Steel: Swedish Stainless Steel
Steel Type: Stainless
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: .3mm
Handle Length: 124mm
Total Length: 400mm
Weight: 246mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Sujihiki
Edge Length: 229mm
Blade Height: 35mm
Edge Steel: Swedish Stainless
Steel Type: Stainless
Construction: 
Cladding: Zenko (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 242mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 145mm
Total Length: 386mm
Weight: 106g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Ashi, White #2
Made in: Sakai, Osaka - Japan
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 39mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Zenko (Mono-Steel)
Cladding: N/A, Mono-Steel
Finish: Migaki (Standard)
Bevel: Double (Asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 277mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 128mm
Total Length: 405mm
Weight: 188g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Sujihiki
Edge Length: 230mm
Blade Height: 35mm
Edge Steel: Swedish Stainless
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 243mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 143mm
Total Length: 382mm
Weight: 102g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Echizen 
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.