in stock

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: Hiragana
Profile: Yanagiba
Edge Length: 227mm
Blade Height: 35mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 236mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 115mm
Total Length: 354mm
Weight: 179g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: SK
Profile: Butchery
Edge Length: 150mm
Blade Height: 29mm
Edge Steel: SK
Steel Type: Carbon
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10:90
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 156mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 107mm
Total Length: 262mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan 
Profile: Utility/Petty
Edge Length: 120mm
Blade Height: 27.7mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: Soft Stainless
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 120mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: .9mm
Handle Length: 103mm
Total Length: 228mm
Weight: 78mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Tsubo Yoshikane 津保吉金
Made in: Seki, Gifu - Japan
Line: Bread
Profile: Bread
Edge Length: 205mm
Blade Height: 41mm
Edge Steel: Undisclosed Stainless
Steel Type: Stainless
Construction: Zenko/Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed Asymmetric
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Total Length: 325mm
Spine Length: 215mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 112.5mm
Weight: 138g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Santoku
Brand: Taihei
Material: Rosewood, Black Horn
Length: 133.8mm
Dimensions at Top: 23mm x 18mm
Dimensions at Bottom: 26mm x 21mm
Weight: 55g

270mm Yanagiba
Brand: Taihei
Material: Rosewood, Black Horn
Length: 142.6mm
Dimensions at Top: 22mm x 15mm
Dimensions at Bottom: 21mm x 17mm
Weight: 34g

300mm Yanagiba
Brand: Taihei
Material: Rosewood, Black Horn
Length: 145.6mm
Dimensions at Top: 23mm x 16mm 
Dimensions at Bottom: 25mm x 18mm
Weight: 44g

Brand: Hitohira ひとひら (一片)

Material: Stainless

Length: 147mm

Weight: 43g

Brand: Hitohira ひとひら (一片)

Material: Stainless Steel

Length: 146mm

Weight: 39g

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Hiragana WS
Profile: Gyuto
Edge Length: 216mm
Blade Height: 45.5mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (mono-steel)
Finish: Migaki (Standard)
Bevel: Double (asymmetrical)  
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Octagonal Pakka
Total Length: 350mm
Spine Length: 225mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 125mm
Weight: 125g
Saya/Guard: Purchased Separately 

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 288mm 
Edge Length: 160mm 
Spine Length: 170mm 
Handle Length: 117mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.5mm 
Thickness of Spine ~1cm from Tip: 1.5mm 
Weight: 187g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Dimensions: 530mm x 295mm 20mm

Weight: 824g

Material: Kiri Wood (Paulownia).

Notes: While technically a hardwood, Kiri Wood is particularly soft on knife edges. It is extremely light, resistant to decay, and has an even higher strength to weight ratio than balsa wood. Kiri Wood's lightweight makes it ideal for taking on hikes, picnics, camping, or simply as an everyday board. Due to its low density and low hardness, it is not advised to be used for heavy-duty work like butcher cleaving, sawing, or forceful impacts. Native to East Asia.

Care: Wash with warm, soapy water, only using something scrubby or abrasive when needed, otherwise use the soft-side of a sponge or simply a towel or rag. Wipe as dry as possible. Once fully dry, store flat if possible. Use food-safe oil or wax blend when the board feels dry, you do not need to constantly oil. Do not let soak. At your discretion you can use a fairly high-grit sandpaper to condition the surface to remove discoloration and maring; oil afterwards.

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Dimensions: 200mm x 350mm x 20mm

Weight: 467g

Material: Kiri Wood (Paulownia).

Notes: While technically a hardwood, Kiri Wood is particularly soft on knife edges. It is extremely light, resistant to decay, and has an even higher strength to weight ratio than balsa wood. Kiri Wood's lightweight makes it ideal for taking on hikes, picnics, camping, or simply as an everyday board. Due to its low density and low hardness, it is not advised to be used for heavy-duty work like butcher cleaving, sawing, or forceful impacts. Native to East Asia.

Care: Wash with warm, soapy water, only using something scrubby or abrasive when needed, otherwise use the soft-side of a sponge or simply a towel or rag. Wipe as dry as possible. Once fully dry, store flat if possible. Use food-safe oil or wax blend when the board feels dry, you do not need to constantly oil. Do not let soak. At your discretion you can use a fairly high-grit sandpaper to condition the surface to remove discoloration and maring; oil afterwards.

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Dimensions: 235mm x 420mm x 20mm

Weight: 467g

Material: Kiri Wood (Paulownia).

Notes: While technically a hardwood, Kiri Wood is particularly soft on knife edges. It is extremely light, resistant to decay, and has an even higher strength to weight ratio than balsa wood. Kiri Wood's lightweight makes it ideal for taking on hikes, picnics, camping, or simply as an everyday board. Due to its low density and low hardness, it is not advised to be used for heavy-duty work like butcher cleaving, sawing, or forceful impacts. Native to East Asia.

Care: Wash with warm, soapy water, only using something scrubby or abrasive when needed, otherwise use the soft-side of a sponge or simply a towel or rag. Wipe as dry as possible. Once fully dry, store flat if possible. Use food-safe oil or wax blend when the board feels dry, you do not need to constantly oil. Do not let soak. At your discretion you can use a fairly high-grit sandpaper to condition the surface to remove discoloration and maring; oil afterwards.

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Hiragana
Profile: Bread
Edge Length: 250mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless 
Bevel: Serrated 
Hand Orientation: Ambidextrous
Handle: Black Plastic Western
Total Length:  384mm
Spine Length: 250mm
Blade Height: 29mm
Thickness: 1.5mm
Handle Length: 133mm
Weight: 144g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Petty
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 245mm 
Edge Length: 135mm 
Spine Length: 135mm 
Handle Length: 104mm 
Blade Height: 28mm 
Thickness of Spine at Handle: 1.6mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 0.5mm 
Weight: 76g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Total Length: 150mm
Blade Length: 64mm
Handle Length: 85mm
Blade Height: 16mm
Weight: 54g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Dimensions: 450mm x 295mm x 20mm

Weight: 691g

Material: Kiri Wood (Paulownia).

Notes: While technically a hardwood, Kiri Wood is particularly soft on knife edges. It is extremely light, resistant to decay, and has an even higher strength to weight ratio than balsa wood. Kiri Wood's lightweight makes it ideal for taking on hikes, picnics, camping, or simply as an everyday board. Due to its low density and low hardness, it is not advised to be used for heavy-duty work like butcher cleaving, sawing, or forceful impacts. Native to East Asia.

Care: Wash with warm, soapy water, only using something scrubby or abrasive when needed, otherwise use the soft-side of a sponge or simply a towel or rag. Wipe as dry as possible. Once fully dry, store flat if possible. Use food-safe oil or wax blend when the board feels dry, you do not need to constantly oil. Do not let soak. At your discretion you can use a fairly high-grit sandpaper to condition the surface to remove discoloration and maring; oil afterwards.

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.