in stock

Brand: K Sabatier
Line: Old Butcher
Made in: Thiers - France
Profile: Butcher
Edge Length: 138mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 140mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Total Length: 268mm
Weight: 95g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Old Butcher
Made in: Thiers - France
Profile: Butcher
Edge Length: 250mm
Blade Height: 42mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 248mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 135mm
Total Length: 385mm
Weight: 181g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Proxus 
Made in: Thiers - France
Profile: Bread
Edge Length: 205mm
Blade Height: 39mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 54-56
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Asymmetric 
Bevel Symmetry: N/A Serrated
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: POM
Ferrule/Bolster Material: Stainless Steel
Spine Length: 195mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 11omm
Total Length: 329mm
Weight: 170g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Proxus 
Made in: Thiers - France
Profile: Paring
Edge Length: 90mm
Blade Height: 20mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 54-56
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: POM
Ferrule/Bolster Material: Stainless Steel
Spine Length: 90mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 100mm
Total Length: 195mm
Weight: 53g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Antique
Made in: Thiers - France
Profile: Carving/Slicer
Edge Length: 170mm
Blade Height: 30mm
Edge Steel: Unclassified Vintage
Steel Type: Stainless
HRC: 55-57
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Wood (Unclassified)
Ferrule/Bolster Material: N/A
Spine Length: 170mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 110mm
Total Length: 280mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Auvergne
Made in: Thiers - France
Profile: Petty/Utility
Edge Length: 160mm
Blade Height: 24mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 55-57
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Coral Wood
Ferrule/Bolster Material: Stainless Steel
Spine Length: 160mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 112mm
Total Length: 272mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Butcher
Edge Length: 137mm
Blade Height: 34mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 68mm
Spine Length: 40mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 125mm
Weight: 95g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: Canif
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: 14C28N
Steel Type: Stainless
Blade Length: 85m
Blade Height: 19.2mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Two-Handed Pinch
Locking Mechanism: N/A, Slip Joint
Spacer/Spring: Stainless
Handle/Scale Material: Stainless
Handle/Scale Color: Multicolor
Blade Finish/Color: Satin
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 195mm
Total Length Closed: 110mm
Spine Thickness: 1.6mm
Weight: 84g
Sheath/Clip: N/A
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Goyon-Chazeau
Made in: Thiers - France
Line: Le Grande tradi
Profile: Utility
Edge Length: 125mm
Blade Height: 34.5mm
Edge Steel: 14C28N
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Ebony w/ Sapwood
Ferrule/Bolster Material: N/A
Total Length: 237mm
Spine Length: 125mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 112mm
Weight: 93g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Bread Knife
Edge Length: 205mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 329mm
Spine Length: 195mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 116mm
Weight: 179g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Fillet
Edge Length: 203mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 325mm
Spine Length: 204mm
Thickness of Spine at Handle: 0.8mm
Thickness ½ way: 0.2mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 116mm
Weight: 134g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Slicer
Edge Length: 204mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 328mm
Spine Length: 205mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 117mm
Weight: 165g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Slicer
Edge Length: 257mm
Blade Height: 29mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 380mm
Spine Length: 257mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 122mm
Weight: 172g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Chef
Edge Length: 260mm
Blade Height: 49mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Coral Wood
Ferrule/Bolster Material: Stainless
Total Length: 391mm
Spine Length: 261mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 125mm
Weight: 275g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Chef
Edge Length: 213mm
Blade Height: 46mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 345mm
Spine Length: 210mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 129mm
Weight: 265g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Boning
Edge Length: 151mm
Blade Height: 24mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 265mm
Spine Length: 149mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.0mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 109mm
Weight: 108g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Tomato Knife
Edge Length: 121mm
Blade Height: 21mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 228mm
Spine Length: 123mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 101mm
Weight: 85g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Pointed Butcher
Edge Length: 285mm
Blade Height: 55mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 440mm
Spine Length: 283mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 0.6mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 157mm
Weight: 232g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.