in stock

Brand: Hitohira ひとひら
Line: SK
Profile: Butchery
Edge Length: 150mm
Blade Height: 29mm
Edge Steel: SK
Steel Type: Carbon
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10:90
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 156mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 107mm
Total Length: 262mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Sakai-Osaka/ Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi  憲哉
Line: Togashi Blue #1 Mizu Honyaki
Profile: Yanagiba 
Edge Length: 290mm
Blade Height: 41mm
Edge Steel: Honyaki Yasuki Blue (Aogami) #1 
Steel Type: Carbon
Construction: Honyaki (differentially hardened)
Cladding: N/A
Finish: Forced Patina
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Taihei Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 304mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 146mm
Total Length: 450mm
Weight: 242g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi 富樫
Sharpener: Kenya Togashi
Profile: Yanagiba
Edge Length: 318mm
Blade Height: 37mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Mizu Honyaki (Differentially Hardened)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Taihei Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 335mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 2.0mm
Handle Length: 152mm
Total Length: 482mm
Weight: 285g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.