in stock

Merion Forge - Wrought Iron x Nickel Damascus - 1.2562 W - 185mm Gyuto - Stabilized Birch Wa Handle

€606,95

Brand: Merion Forge
Smith: Dominik Filip
Sharpener: Dominik Filip
Made in: Dolní Lutyně - Czech Republic
Profile: Gyuto
Edge Length: 185mm
Blade Height: 50.2mm
Edge Steel: 1.2562 W
HRC: 63-64
Steel Type: Carbon
Grind: Convex
Construction: Awase/San-Mai
Cladding: Nickel Damascus
Finish: Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal Wa
Handle Material: Stabilized Birch
Ferrule/Bolster Material: Black Horn
Total Length: 329mm
Spine Length: 200mm
Thickness of Spine at Handle: 5.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 128mm
Weight: 213g
Saya/Guard: Sold Seperately

Merion Forge - Wrought Iron x Nickel Damascus - 1.2562 W - 185mm Gyuto - Stabilized Birch Wa Handle

Hitohira - STK V10 - Tsuchime Damascus - 165mm Nakiri - Rosewood Handle

€149,95

Brand: Hitohira
Made In: Echizen, Fukui - Japan
Line: STK V10
Profile: Nakiri
Edge Length: 160mm
Blade Height: 51mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oval Wa Rosewood
Total Length: 308mm
Spine Length: 181mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 127mm
Weight: 167g
Saya/Guard: Purchased Separately

Hitohira - STK V10 - Tsuchime Damascus - 165mm Nakiri - Rosewood Handle

Sakai Kikumori - Tomoshibi - White #2 - 180mm Deba - Ho Wood Handle

€233,95

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Tomoshibi
Profile: Deba
Edge Length: 190mm
Blade Height: 56mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Migaki/Standard
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right
Handle Shape: Oval
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn Ferrule
Total Length: 335mm
Spine Length: 200mm
Thickness of Spine at Handle: 7.3mm
Thickness ½ way: 5.7mm
Thickness ~1cm from Tip: 3.8mm
Handle Length: 133mm
Weight: 323g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Sakai Kikumori - Tomoshibi - White #2 - 180mm Deba - Ho Wood Handle

HADO - Sumi - Blue #1 - Damascus Kurouchi - 180mm Bunka - Brown Lacquered Oak Handle

€396,95

Brand: HADO
Smith: Yoshikazu Tanaka 田中
Sharpener: Tadataka Maruyama
Made in: Sakai, Osaka, Japan
Line: Sumi Blue #1
Profile: Bunka
Edge Length: 168mm
Blade Height: 50mm
Edge Steel: Blue #1
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron Damascus
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Brown Lacquered Oak Handle
Total Length: 318mm
Spine Length: 185mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 134mm
Weight: 159g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

HADO - Sumi - Blue #1 - Damascus Kurouchi - 180mm Bunka - Brown Lacquered Oak Handle

Morihei - Hisamoto - Super Blue - Tsuchime Stainless Clad - 165mm Nakiri - Magnolia Handle

€233,95

Brand: Morihei 森平
Line: Hisamoto Tsuchime
Profile: Nakiri
Edge Length: 164mm
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, Sanmai
Cladding: Stainless
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 316mm
Spine Length: 184mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1mm
Handle Length: 134mm
Weight: 161g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Morihei - Hisamoto - Super Blue - Tsuchime Stainless Clad - 165mm Nakiri - Magnolia Handle

Hitohira - FJ SG2 - 180mm Bunka - Western Linen Micarta Handle - Mirror Polished

€536,95

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: FJ SG2 Mirror
Profile: Bunka
Edge Length: 179mm
Blade Height: 47mm
Edge Steel: SG2 Powder Metal
Steel Type: Stainless
Grind: Convex
Construction: Awase Clad
Cladding: Stainless
Finish: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Linen Micarta
Ferrule/Bolster Material: Stainless Steel
Total Length: 296mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 173g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - FJ SG2 - 180mm Bunka - Western Linen Micarta Handle - Mirror Polished

Goko Hamono - Kogetsu - Mono White #1 - 180mm Gyuto - Western Handle

€275,95

Brand: Kogetsu 光月
Smith: Goko Hamono 五香刃物製作所
Line: Mono White #1
Profile: Gyuto
Edge Steel: White #1
Steel Type: Carbon
Cladding: N/A, Mono-steel/Zenko
Bevel: Double
Bevel Symmetry: 20/80
Hand Orientation: Right-Handed
Handle: Pakka Western
Total Length: 304mm
Edge Length: 182mm
Spine Length: 185mm
Blade Height:46mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 115mm
Weight: 162g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Goko Hamono - Kogetsu - Mono White #1 - 180mm Gyuto - Western Handle

Goko Hamono - Kogetsu - Mono SK - 180mm Gyuto - Western Handle

€163,95

Brand: Goko Hamono 五香刃物製作所
Smith: Kogetsu 光月
Line: Mono SK
Profile: Gyuto
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-handed
Handle: Pakka Western
Total Length: 310mm
Edge Length: 185mm
Spine Length: 185mm
Blade Height: 45mm
Thickness at Spine: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 115mm
Weight: 162g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Goko Hamono - Kogetsu - Mono SK - 180mm Gyuto - Western Handle

Hitohira - GR - Blue #2 Damascus - 165mm Nakiri - Magnolia Handle

€140,95

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen-Fukui/ Japan
Profile: Nakiri
Edge Length: 162mm
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Magnolia Wa
Total Length: 306mm
Spine Length: 178mm
Handle Length: 128mm
Blade Height: 51mm
Thickness of Spine at Handle: 2.5mm
Thickness of Spine Half Way: 1.7mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 140g
Saya/Guard: No

Hitohira - GR - Blue #2 Damascus - 165mm Nakiri - Magnolia Handle

Sakai Kikumori - Nakagawa - Blue #1 Damascus - 180mm Santoku - Magnolia Handle

€462,95

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa
Made in: Sakai, Osaka - Japan
Line: Blue #1 Damascus
Profile: Santoku
Edge Length: 170mm
Blade Height: 47.5mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus/Sekiso
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Wa
Total Length: 313mm
Spine Length: 190mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 127mm
Weight: 151g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Sakai Kikumori - Nakagawa - Blue #1 Damascus - 180mm Santoku - Magnolia Handle

Hitohira - Harima - Blue Super - Stainless Clad - Kurouchi - 165mm Nakiri - Walnut Handle

€130,95

Brand: Hitohira ひとひら (一片)
Made in: Miki, Hyogo - Japan
Line: Harima
Profile: Nakiri
Edge Length: 165mm
Blade Height: 47mm
Edge Steel: Aogami Super/Blue Super
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Walnut w/ Pakka Ferrule
Total Length: 128mm
Spine Length: 180mm
Thickness of Spine at Handle: 4.1mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 128mm
Weight: 162mm
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Harima - Blue Super - Stainless Clad - Kurouchi - 165mm Nakiri - Walnut Handle

Hitohira - Harima - Forged Blue Super Stainless Clad - Kurouchi - 180mm Bunka - Walnut Handle

€130,95

Brand: Hitohira ひとひら (一片)
Made In: Miki, Hyogo - Japan
Profile: Bunka
Edge Steel: Yasuki Blue (Aogami) Super
Steel Type: Carbon
Cladding: Soft Stainless Kurouchi
Bevel: Double
Hand Orientation: Ambidextrous
Handle: Walnut & Pakka Ferrule Octagonal
Total Length: 319mm
Edge Length: 180mm
Spine Length: 190mm
Blade Height: 44.5mm
Thickness at Spine: 3.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Weight: 139mm
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Harima - Forged Blue Super Stainless Clad - Kurouchi - 180mm Bunka - Walnut Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 170mm Santoku - Western Handle

€130,95

Brand: Hitohira ひとひら (一片)
Line: Imojiya ST
Profile: Santoku
Edge Length: 170mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 296mm
Spine Length: 173mm
Handle Length: 123mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.4mm
Weight: 176g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 170mm Santoku - Western Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 165mm Nakiri - Western Pakka Handle

€126,95

Brand: Hitohira ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 165mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 295mm
Spine Length: 172mm
Handle Length: 122mm
Blade Height: 46mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.4mm
Weight: 187g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 165mm Nakiri - Western Pakka Handle

RYUSEN - FUKAKURYU - ATS314 Damascus - 170mm Kiritsuke Santoku - Mono Curly Maple Handle

€303,95

Brand: Ryusen 株式会社龍泉刃物
Line: FUKAKURYU
Profile: Kiritsuke Santoku
Edge Steel: ATS314
Steel Type: Stainless
Cladding: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Mono Curley Maple Wood
Total Length: 315mm
Edge Length: 176mm
Spine Length: 188mm
Blade Height: 46mm
Thickness at Spine: 2.7mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 128mm
Weight: 121g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

RYUSEN - FUKAKURYU - ATS314 Damascus - 170mm Kiritsuke Santoku - Mono Curly Maple Handle

Sakai Kikumori - Ginsan - 165mm Kamagata Usuba - Ho Wood Handle - Saya

€233,95

Brand: Sakai Kikumori 堺菊守
Line: Ginsan 銀三
Profile: Kamagata Usuba
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Single
Hand Orientation: Right Handed
Handle: Ho Wood Wa
Total Length: 314mm
Edge Length: 165mm
Spine Length: 180mm
Blade Height: 42mm
Thickness at Spine: 3.1mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 133mm
Weight: 157g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Sakai Kikumori - Ginsan - 165mm Kamagata Usuba - Ho Wood Handle - Saya

Forge de Laguiole - Barthelemy Cheese Knife - Ebony Wood Handle

€182,95

Brand: Forge de Laguiole
Made In: France
Materials: Stainless Steel & ? Wood
Total Length: 275mm
Edge Length: 150mm
Handle Length: 120mm
Blade Height: 32mm
Spine Thickness: 1.6mm
Weight:111g

Forge de Laguiole - Barthelemy Cheese Knife - Ebony Wood Handle

Hitohira - HG - Damascus - Santoku - Western Handle

€116,95

Brand: Hitohira ひとひら (一片)
Line: HG Damascus
Profile: Santoku
Steel Type: Unclassified Stainless
Cladding: Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 295mm
Edge Length: 171mm
Spine Length: 174mm
Handle Length: 118mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 157g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - HG - Damascus - Santoku - Western Handle

Hitohira - Imojiya - MZ VG-1 - 165mm Santoku - Western Handle

€88,95

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Santoku
Edge Length: 165mm
Blade Height: 46mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 288mm
Spine Length: 170mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 116mm
Weight: 150g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya - MZ VG-1 - 165mm Santoku - Western Handle

Ajikataya - Kengata Single Bevel Hatchet - White #2 - Kurouchi - 180mm - Oak Handle

€233,95

Brand: Ajikataya 味方屋
Made In: Sanjo, Niigata - Japan
Line: Kengata Single Bevel Hatchet
Smith: Hinoura Blacksmith 日野浦刃物
Sharpener: Hinoura Blacksmith 日野浦刃物
Style: Single Bevel Kengata
Steel: Shirogami #2/White #2
Steel Type: Carbon
Edge Length: 193mm
Blade Height: 49.5mm
Blade Thickness: 5.3mm
Blade Construction: Awase, Ni-Mai
Blade Finish/Color: Kurouchi (forge finish)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Bolster: Iron
Pommel: N/A
Handle/Tang Construction: Partial Tang
Handle Material: Oak
Handle Length: 167mm
Total Length: 365mm
Weight: 395g
Sheath/Clip: Belt Sheath

Ajikataya - Kengata Single Bevel Hatchet - White #2 - Kurouchi - 180mm - Oak Handle

Sakai Kikumori - Kikuzuki Uzu - Blue #1 Damascus - 180mm Kiritsuke Santoku - Ho Wood Handle

€490,95

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Santoku
Edge Length: 164mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 314mm
Spine Length: 185mm
Thickness of Spine at Handle: 3.0mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 128mm
Weight: 129g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.